INFINITIV A1200 TOWER SYSTEM
Custom Amiga Tower Systems for the Amiga 1200

The Infinitiv 1200 Tower is custom designed for the A1200 computer. It neatly houses the motherboard and floppy drive and expands the possibilities of this excellent computer. It's design includes a convenient back panel which slides out of the Tower to allow simple fitting of the A1200 motherboard.

The standard unit is a midi sized Tower, but this can be increased by adding snap-on 5.25" bays which raise the Towers height. One of these bays is required if a 1200 accelerator is to be fitted. There is also the facility to add internal 3.5" bays in the same manner, so the possibility of adding extra hard drives, CD-ROM, floppies etc. is almost limitless.

We can offer various kits to meet various requirements and you can also choose to add one of our all-in-one Pentium board and Fusion Mac emulation for a genuine multi-computer platform.

We can also supply an external Keyboard case and interface which allows you to re-house your old A1200 keyboard in an external case, removing the need for a PC keyboard.

Alternatively, we over individual component parts to enable the user to choose the system required, or buy the system in steps. We can also supply peripherals such as accelerators (68040/060, PPC) and graphics boards (Picasso IV/II+) that work perfectly with our Towers.
Infinitiv

    Individual Infinitiv Parts

    We can supply the complete range of individual Infinitiv component parts, so that you may simply re-house your Amiga 1200 in a Tower without Zorro expansion ports, upgrade gradually or add further parts to one of our kits. However, we also supply various kits to meet all kinds of requirements.

  • Infinitiv Tower (includes Keyboard interface)

    • Price : £119.95 UKP

  • Infinitiv Tower + 200/230W PSU

    • Price : £159.95 UKP

  • Zorro board Z1-i (ZII x5, PCI x2, ISA x2, Video x1 (optional)

    • Price : £149.95 UKP

  • Zorro board Z2-i (ZII x5, PCI x2, ISA x2, Video x1 (optional), 2 x SIMMs (10Mb Max)

    • Price : £199.95 UKP

  • Zorro board Z3-i (ZIII x5, PCI x1, ISA x2, Video x1 (optional), SCSI-II, 4000 CPU Slot, 1 x SIMM

    • Price : £319.95 UKP

  • PSU 1200 200/230W

    • Price : £ 44.95 UKP

  • PCMCIA right angle adaptor

    • Price : £ 29.95 UKP

  • Power-In adaptor (required for Towers with internal PSU but without Zorro board)

    • Price : £ 6.95 UKP

  • External Keyboard case and cable (re-houses original A1200 keyboard)

    • Price : £ 39.95 UKP

  • 3.5" "Snap-on" bay (increases internal 3.5" bay capacity)

    • Price : £ 9.95 UKP

  • 5.25" "Snap-on" bay (increases external 5.25" bay capacity and Tower height)

    • Price : £ 29.95 UKP

  • Keyboard adaptor (5pol DIN to 6pol mini DIN - for PC Keybaords)

    • Price : £ 4.95 UKP

  • Video slot signal cable (required to activate Video slot on Zorro boards)

    • Price : £ 39.95 UKP

  • Audio slot bezel (provides 2 x phono connectors at rear of Tower)

    • Price : £ 19.95 UKP

  • SCSI slot bezel (provides external 25-pol D-socket at rear of Tower)

    • Price : £ 19.95 UKP

  • Front bezel for 3.5" floppy drive housing in 5.25" bay

    • Price : £ 14.95 UKP

    Infinitiv 1200 Kits

    Infinitiv K-Z1

  • Infinitiv Tower (with Keyboard interface)
  • PSU 200/230W
  • Zorro board Z1-i (ZII x5, PCI x2, ISA x2, Video x1 (optional)

    • Price : £299.95 UKP

    Infinitiv K-Z2

  • Infinitiv Tower (with Keyboard interface)
  • PSU 200/230W
  • Zorro board Z2-i (ZII x5, PCI x2, ISA x2, Video x1 (optional), 2 x SIMMs (10Mb Max)

    • Price : £349.95 UKP

    Infinitiv K-Z3

  • Infinitiv Tower (with Keyboard interface)
  • PSU 200/230W
  • Zorro board Z3-i (ZIII x5, PCI x1, ISA x2, Video x1 (optional), SCSI-II, 4000 CPU Slot, 1 x SIMM

    • Price : £449.95 UKP

Order Now!
Back to Micronik Page