     

         STAR Micronics Windows 3.0 & 3.1 Printer Drivers
          
     
     - Place the diskette in your drive.
     
     - Log on to the disk drive by typing "A:"  or "B:" depending on where
       you put the diskette.
       
     - Type "INSTALL" and follow the instructions on the screen.
     
     - Please read the "Control Panel" section of your Windows manual.
     
     
          
        * Thank you for choosing STAR MICRONICS *
-----------------------------------------------------
Installing your Star Micronics Printer in Windows 3.x
-----------------------------------------------------

1.  After booting Windows, open the (Main) group and select the Control
Panel Icon.

2.  Select the Printers Icon.

3.  Select Add Printers button.

4.  Scroll to Unlisted Printer, then select the install button

5.  In the Add unlisted printer select the directory where you installed
the printer drives (i.e. c:\windows\stardrv), and select the OK button. 
Next select the printer you wish to install that is shown in the Driver
Files box and select OK.

6.  After the file has been copied, highlight the STAR MICRONICS printer   
you wish to use and select configure.  Please refer to your Microsoft
Windows Users Guide, Chapter 5 Control Panel under the Installing a
Printer section.

File Names

Driver Name        Printer
-----------        --------
star48.drv         STARJet 48

starls.drv         STAR LaserPrinter 4 & Star LaserPrinter 8
starm24.drv        STAR 24 Pin Printers

starm9.drv         STAR 9 Pin Printers

Thank you for choosing STAR MICRONICS
