1-12-93
This Door was written for Wildcat 3.xx systems and uses the Door.sys File
If you find bugs , please leave info with private
message to me at wildcat hq.


Create a sub dir called  INFO under the \WC30 dir.
copy MAIN.ZIP file into \WC30\INFO
unzip MAIN.ZIP file and then delete the MAIN.ZIP file


Create a Door#.Bat in \wc30 directory
with contents as this....
                              CD\WC30\INFO
                              INFO INFO.CFG

and change INFO.CFG file to suit your BBS info

  There is a new File called G1SETUP.EXE that will create a INFO.CFG
file for you.


THE INFO.CFG HAS AN EXTRA LINE FOR YOUR SPONSOR NAME
IF THERE IS NO SPONSOR PUT YOUR NAME HERE OR THE WORD ( NONE )


All of the info help information files are created with a true ansi
editor so you can change the Main Menu selections and edit the actual
information help files.

The Main Menu at this time can only have 12 selections
and the selections must be in the format that the sample is in.

The help file( instr.txt ) can also be edited to suit your needs.

The files are labeled 1.txt , 2.txt , 3.txt ex... to correspond to
the Menu selections. Do to some callers screen limitations do not
make you info files longer than 70 char. wide. Number of lines does
not matter.

the info files and menu selections are set up as a bbs help
and information door. but because you can change the menu
and change the info files , as well as the instr.txt file you
can completely change the format of what the door is for.
thats all.

A new addition*************
 Now you can create your own opening display using THEDRAW.
The program will search for a file called ANSI1.SCR and ANSI1.BBS
and if they exist will send this file as your opening display instead
of the default.
The file must be created with THEDRAW , saved with the LENGTH of line
optio no more than 79 characters wide. THEDRAW will inform you of the
number of lines when it saves the file, and will ask you for the maximum
line length when you start to save the file. When you create your
displays, You should create your color display and save it as an ansi
file called "ANSI1.SCR" and then resave it as an ascii file called
"ANSI1.BBS".
Both of these files then go in the \wc30\info directory along with all
the other files.

There is a File called INFO.KEY that must be present. When the program is
registered, you will receive a new key file.


*******please make sure that in the .cfg file the port config. matches
what you have set in makewild for port settings.

Questions or comments
ECHOS OF ENCHANTMENTS BBS
1-310-421-7056
DONALD DAHLMAN
