Help Contents

  I. All Screens
 II. Main Screen
III. Install Screen
 IV. Loading Dark Hour Levels
  V. Technical Support

I.  All Screens

Use the mouse and click on the buttons to select.  
Select Main to return to the main menu.
Select Help to come back to this screen.

II. Main Screen

Briefing Room
  Shows your mission.
Install Levels
  Go to install screen.
Run Levels
  Starts level in single player, coop, or deathmatch mode.
Web, Editors
  Lists Quake web sites and editors.
Help
  On-line help screen.
About
  About Dark Hour screen.
Exit
  Exits Dark Hour.

III. Install Screen

(Note: Quake must be installed first otherwise you won't be
able to install or run Dark Hour levels)

On the left side of the screen is a list of levels available 
for installing. The one directly beside it is a list of 
levels installed. The other areas on the right are reserved 
for:
•	The directory on the CD-ROM,
•	The author,
•	A description of the level,

A. For full install: simply hit >> button (recommended)

B. For full uninstall: simply hit << button (recommended)

C. To install level(s): click on level(s) from the left 
   and hit the > button.

D. To uninstall level(s): click on level(s) from the right 
   and hit the < button.

IV. Loading Dark Hour Levels

(Note: Quake must be installed first otherwise you won't be
 able to install or run Dark Hour levels)

A. Loading Dark Hour levels using Run Levels screen. 

   1. Click on a level (from the list). 
   
   2. Once it is selected, then you can start the level in 
      either single player, coop, or deathmatch mode by 
      pressing any of the three large buttons on the right.

B. Loading levels using console commands (for advanced users)

   1. Single Player Mode:
      
     a) You are playing a level and you want to change to 
        another Dark Hour level (without quiting and then 
        restarting Quake): You press the console key ~ 
      (top left key on keyboard, just below the ESC button) 
      
     b) Now, you have access to the console. To load another 
        Dark Hour level you must type in map <level>. For 
        example, if you want to load a Dark Hour level called 
        wargames, you would type map wargames at the console 
        prompt. A list of all the Dark Hour Levels will be 
        listed on the Manual for your convenience. 

   2. Coop Mode:
  
      a) Press console key

      b) Type in map <level>

   3. DeathMatch Mode:

      a) Press colsole key

      b) Type in map <level>  

V. Technical Support

Voice: (416) 656-6369
Fax:   (416) 656-6368
Email: support@microforum.com
Web:   http://www.microforum.com
Mail:  Microforum
       1 Woodborough Ave.
       Toronto, ON  M6M 5A1
       Canada

Enough reading, go play some Dark Hour Levels !