1. Microsoft Windows 3.1

1.1	INSTALLATION 
The graphic installation program (TINSATLL) supports a simple five-step installation procedure for the display driver setup program, the power management program and the UNinstall program.

To use TINSTALL, follow the 5 steps below:
1.	ENSURE that MS Windows 3.1x is up and running properly, using the standard VGA driver.
2.	SELECT the MAIN group in Program Manager.
3.	CLICK on FILE or press ALT + F4
4.	CLICK on RUN or PRESS R to select command line.
5.	TYPE in X:\T975\Win31\DISPLAY\TINSTALL  (Where X is the letter of your CD-ROM drive.)  

Choose Express installation for quick and decision-free installation. Display drivers will be copied into the TRIDENT.HGI directory and Utility files will be copied into the TRIDENT.UTL directory. Once all files are copied, a program group called DISPLAY DRIVER AND UTILITIES will be created.

When all necessary files are copied and a group name is selected, the TINSTALL program will create three icons:
a.	Screen Control (Used to configure display drivers).
b.	DPMS (Used for power management configurations).
c.	UNinstall (Used to delete the installed TRIDENT drivers).

1.2	SCREEN CONTROL
The Screen Control panel contains controls for setting screen resolution, color depth, font size, refresh rates. 
Color depths of 16, 256, 64K, or 16.7M colors can be selected by clicking next to the desired option. 
Screen resolutions of 640x480, 800x600, 1024x768, 1280x1024 or 1600x1200 can be selected by clicking next to the available options. 
Available refresh rates are dependent on the selected color depth and resolution. 

Configuring the Display Driver
	Select the color depth first.
	Select the resolution.
	Select the font size (if available as an option).
	Select the refresh rate.
	Click on OK. If the current driver does not support the selected configuration, Windows will have to be restarted.

1.3 Video for Windows 1.1 Installation
You may perform following steps to install Video for Windows 1.1.

	1. TYPE in X:\T975\Win_31\VFW11E\SETUP  (Where X is the letter of your CD-ROM drive.)  
	2. Follow the instruction from the setup program to complete the installation.