4
    -PICKING MASTER COMBO LOCKS-
 
q           
-Written by-
          -The Debutate-
 
Today's tutorial will be how to ick Master cobination locks.  Here's how:
 
First turn it clockwie a couple of times to align the disks iside.  Then
pply slight upwards pressure on the shackle with your orefinger while
still turning clockwise  At a certain point it will pull the shackle down,
note the numberat which it happens. This number plus 5 is the first dgit.
Then start over, and dial the first number as ifyou were regularly going
to open it.  Then turn countr-clock-wise and pass the first number.  Then
pull onthe shackle hard and keep turning counter-clockwise.  t will
stop at about 12 numbers.  Anyone of these coud be the second number, and
you have to try them all.  The last number is found by dialing the first,
then second, and then after the second, keep turning clockwise while pulling
up hard.  It will open at a certain nmber and that is the third.  It may
take a little pratice before you can do it right.  And this method work
best with the newer locks.  Right now I can pick oneunder 2 minutes, and
you can too if youpractice. 
Enter Bulletin Selection (XX,Q=Quit) :