

               ==========  
               Trip Wires  
               ==========  
  
     Well first of all I reccommend  
that you read the file on my board  
about landmines... If you can't then  
here is the conecpt. You can use an  
m-80,h-100, blockbuster or any other  
type of elxplose that will light with  
a fuse. Now the way this works is  
if you have a 9volt batery, from a  
radio cthred car or what ever and  
get either a solor igniter (preferably)  
or some steel wool you can create  
a remote ignition system. What you  
do it set up a schematic like this.  
  
        ------------------>+ batery  
 steel ||                ->- batery  
 wool  ||                /  
  :==:---  <--fuse       \  
       ||                /  
       ---- spst switch--\  
  
So when the switch is on the currnet  
will flow through the steel wool or  
igniter and heat up causing the fuse  
to light.  
     Note: For use with steel wool  
try it first and get a really thin  
peice of wire and pump the current  
through it to make sure it will heat  
up to light the explosive.  
**********************************  
Now the thing to do is plant your  
explosive whereever you want it to  
be but bury it and cover the wires  
obviously... Now take a this wire  
fishing line is good about 20 lb.  
test and tie one end of the wire  
to a secure object. Have your switch  
secured to seomthing to and make a  
loop on the other end on the line.  
Put the loop around the switch such  
that when pulled it will pull the  
switch and set off the explosive.  
Remeber it may take a few seconds  
to ignite the explosive... The thing  
to do is to experiment with this  
and find your best method...  
:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:  


                                              
