



I actually got this from a movie, and have tried it [IT WORKS!!!]. Ok you may
have to do this a couple times before you get it. Heres what you need:

A few light bulbs
Torch [one that will melt glass, radio shack single cylender model will do]
Some gasoline
Some liquid soap
Some epoxy glue

Heres what you do:

1) Make a hole in the light bulb like this:


                   *
                  ---
                  : :
  Make hole here  : :  or here.
                \ / \ /
                 /   \
                :     :
                :     :
                 \---/
             Not here!!!!!

2) Making the hole, like in the diagram [dont make it on the bottom, 
because if the seal you will make should break, the person/room 
you want to eliminate will notice the hole [and the gasoline
on the floor!!!] whereas the if its on top it will still work...

3) Now carefully fill the light bulb about half full with gas, and then the
rest with soap [hold on angle if you have to]. Now epoxy the hole shut, and
screw it in...

have phun
(_>Shadow Hawk 1<_)



                                                                    
