EXPLOSIVES PART 1
    OF BLOW'EM AWAY SERIES


                          BY Meister Bang
                      Writen BY KanYo Servive


        PART:  Ping Pong Ball Gernade

           Diagram 1

                       Cut hole about 2/3 size of Ball
                      /
                    *  *
                   *    *
                  *      --Cut slit as wide and as thick as cardboard
                   *    *
                    ****

           Diagram 2
                       1                       Part Description
             2    ____/
              \   :  :                         1....Paper clip (bend tip into
        4      \**:***   3                           #2 so as not to misfire)
         \   **.\{:}..**/                      2....Fine sandpaper(100 less)
          \**....{:}....**     5                     taped and/or glued on #1
         **&&&&..{-}-.&&&&**  /                3....Strike anywhere match heads
       **&&&&&&&&&&&&&&&&&&&*/                       (light by #2,lights #3)
      **=====================**                4....Paper to preserve matches
      **#####################**                      and to light #5
     6---###################**                 5....Cardboard for delay of
         **###############**                         explosion
           **###########**                     6....Gunpowder or equivalent
             **#######**
               *******



      Procedure for making the Ping Pong Ball Gernade

     1...Make hole in top on ball as shown in diagram 1
     2...Cut slit in the side f ball as shown in diagram 1
     3...Fill the ball with gunpowder ,up to slit in diagram 1
     4...Slide cardboard ,over gunpowder, through slit
     5...Tape slit up
     6...Put in paper wading
     7...Tape or glue on sandpaper to paper-clip pin
     8...Bend clip as shown and bend tip through sandpaper
     9...Pour in ,easyly light,Strike Anywhere matches ("DIAMOND" etc.)
    10...Tape up hole on top



  Firing
    1...Pull out Pin making sure matches light
      Match doesn't light-
      Stick it in try again
        Still doesn't light-
        Salvage parts and try building again.
    2...Throw
    3...GET THE HECK OUT OF THERE!!!
