                                 PAPHHFTAW
     Personal, Anti-Personel, Hand-Held, Flame-Thrower Assault Weapon

                                Written by
                                  Enigma
                                Concept by
                                  Ishkick
                           Designed and Built by
                                  Enigma

And now, the moment you've all been waiting for!  (well, most of you....or
some of you....or a few of you........).  The unveiling of THE anarchy
weapon!

The concept is really simple.  A friend got his face bashed in by a few
bullies, he got mad, he wanted to get even, and he came to us with his
problem.  Ishkick decided it would be kewl to have an easily concealable
home made weapon.  We bounced a few ideas off of each other, and he finally
came up with the idea of using the engine from a model rocket as the power
source....because they are cheap.  I went to work right away, and after a
few prototypes, I finally came up with a weapon small enough to hide.  Here
it is:

Materials:
 PVC pipe with an inside diameter large enough to fit a rocket engine.
 A rocket engine.
 A piece of dowling (a rod of wood).  Same diameter as inside of PVC
    pipe.  Only about .5 - 1 inches needed.
 A button.  Standard momentary contact push on, spring back to off.
 A battery pack.  One of the Radio Shack ones that holds four AA's and
    has a little 9V connector.
 A 9V connector.
 A bit of foil
 A few tools: Saw, soldering iron, wire, glue, etc....

What to do:
>> Cut a length of PVC pipe.  It has to be long enough to hold the engine,
the dowling, the button, and the wiring.
>> Insert the piece of dowling and push it in with the rocket engine. 
There should be a few mm of the rocket engine exposed.  Remove the engine,
and (if you want to) glue the piece of dowling in (from the side opposite
the engine.  We wouldn't want it burning the glue)
>> Drill a hole in the PVC pipe near the dowling, on the side opposide the
engine.  This is for the wires to go to the 9V connector.
>> glue two pieces of foil on either side of the inside of the tube.  This
is kinda hard to explain... The thing you want to do is use the two pieces
of foil as plates that the rocket engine igniter can touch and create an
electrical circuit.  See the diagram, and if you still have problems, E-
Mail me at Syntax 714-752-0228, or at most any So. Cal. anarchy board.  
>> Connect wires to the two pieces of foil.  Bring one down to the 9V
battery clip, and the other to one side of the button.  Attach a wire from
thr other side of the button to the battery clip.  Also see the diagram to
see where the wires go.


How to make the engines:
>> Put an igniter in an engine.  Fold it over, and secure it with a piece
of tape.  Bend the ends apart a little, so that when the engine is slid
into the tube, they connect with the foil plates.


How to fire:
>> Put in an engine
>> Attach the battery to the 9V clips
>> Push the button
>> Oops, and aim first.  If you are doing this righ now without reading the
entire thing first, you have probably been fried.  sorry.....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Well, I hope you have fun!  We have had a great time.  Right now, we're
working on a way to have the tube in the sleve of a jacket, and the wires
running up the arm and into an inside jacket pocket with a button and
arming switch there.  We hope you've been able to understand the
instructions.  Feel free to E-Mail me if you have any problems.

Included is a .MAC file of the diagrams needed.
End of file.
                               