__  __      _______
                                  | \/ |     / _____/
                                  |_||_|etal/ /hop
                                  _________/ /
                                 /__________/
                                 (314)432-0756
                         24 Hours A Day, 300/1200 Baud

                                  Presents...

                                ==Phrack Inc.==
                     Volume One, Issue One, Phile #7 of 8

.-------------------------------------------------------------.
!                ///////                                      !
!                 //                                          ! 
!                // h e C l a s h m a s t e r ' s             !
!               .===============================.             !
!             <        A C E T Y L E N E        >             !
!             <        ->B A L L O O N<-        >             !  
!             <        ---->B O M B<----    t tape
9) Two pieces of wood as long as your pipe is wide
10) A circle of sheet metal about 2" in diameter


The Launcher Itself
~~~ ~~~~~~~~ ~~~~~~

   Okay the first thing you do is make sure your pipe is pretty evenly
round.	It doesn't have to be perfect, but the worse it is the more
friction the rocket will encounter coming out of the tube, thus
shortening the flight.	Then heft it onto your shoulder and see if you
can lift it, which you should be able to with no difficulty.  Now what
you do is take your Model Rocket Ignition System, and duct tape it to
the top of your pipe, where it is in easy reach.  Don't glue it on because
if you need to change the batteries in the thing you'll have quite a
problem on your hands.	If you're okay with electronics you can use a
doorbell instead of a Rocket Ignition System, and that way you won't
have to have the little safety key and all.  Then tape the wires onto
the pipe going back to the tail end and cut them off so they're not
dangling around.  They should be able to fit about a foot inside the
tube...
		   Ignition sys 	two wires --\
			    |	______________ <----/
		    ________ooo/_____________ \
		    |			 ___|_/
	      front |_______________________|	back
			      |
			  pipe|


The Rocket
~~~ ~~~~~~


   Now for the rocket.	Just follow the instructs for a normal model
rocket, except don't make the recovery system, and don't make the
fins.  Also be sure to glue in the nose cone.  After you're done with
that, measure how big the fins can be and still have the rocket fit in
the launch tube, and cut them out all the same size from the poster
board (12 of 'em, there's gonna be six fins).  Now when you have them
all put 2 together side by side and glue them so that they are twice as
strong as normal.  Do this six times, so now you have six fins, three in
the front, and three in the back.  Glue these to the body tube of the
rocket so that they look like this:

			       \   /
			     ___/-\___
				\-/
			       /   \
			     front view

(not a great pic), but when you look from the front you should see all
six fins.  Now measure this against the body tube and slice off the tips
of any fins until they all slide easily through the launcher.


The Blast Plate
~~~ ~~~~~ ~~~~~

Take your two pieces of wood and make a notch in each like this:

			   _________________
			  |	 _____	    |
			  |______|   |______|

each notch should be the width of the other piece of wood.  Then put
them together so they form an X, and slide them into the tube, they
should be snug so that it's not easy to pull the thing out.  Now take it
back out and glue the sheet metal onto the X, so it forms a blast
deflector:
	 ___
	 | |
  wood->_|_|_
  |    /     \ <-sheet metal
 _|_ /	       \ ___
|___|		|___|
     \	       /
       \_____/
	 | |
	 |_|


Launch
~~~~~~

Now take your Rocket and slide it in through the back of the tube, and
insert your igniters into the engine and put it in the rocket so that
it's sort of in the ball may rise and give you 
a few nasty burns. 
 
Have fun! 

But be careful...
 
NOTE: I, The Clashmaster, am in NO WAY responsible for the use 
===== of this information in any way. This is for purely 
      informational purposes only! 
 
 
This has been a 2600 Club production. 
 
                 -=*Clash*=- 
                  2600 Club 
110%