The name of your bulletin board system.
The System Operator's (your) name.
Your board's phone number in xxx-yyy-zzzz form.
For color VGA systems, uses vga fades, vga screen saver, and more.
For some MultiTaskers; slow and incompatible with Extended Display Mode.
Time in minutes before screen saver activates; 0 disables screen saving.
Drives to check in WFC. Don't include floppies, CD-ROMs or really slow HDs.
FAST file moves, might cause problems in rare circumstances.
Number of lines of XMS scrollback buffer to allocate; 0 disables.
Default status bar in host mode: (1-6); 0 disables. Alt-B changes online.
Pause user timer during Sysop/user chats?
Require Sysop password to exit System/75?
Require users' phone number in logins?
Number of minutes before upcoming events to warn users; 0 = don't warn.
Maximum number of times a user can page the Sysop; 0 = unlimited.
Maximum number of password attempts before disconnecting; 0 = unlimited.
Maximum amount of idle time in minutes before disconnecting; 0 = disable.
Days between mandatory password changes; 0 disables.
Password prompted for by the ' ACS code and the local exit password.
Password required to logon to your board.
New users must know this password to apply.
Users can page Sysop after hours if they know this password.
Users can logon & download with low baud rates by knowing this password.
Characters displayed while entering passwords. ^U for ascii chart.
Directory with your help files.
Area codes used to determine local users. Example = "800;900;404".
Max number of calls to be stored in last callers data file, 0 = no limit.
Number of days to keep Sysop logs; 0 = no limit.
Swap memory on shelling? (slower but gives more memory)
Use EMS to shell out? Will use XMS or disk if this is off.
Use XMS to shell out? Will use EMS or disk if this is off.
Use SoundBlaster for page tunes, logon sounds, etc?
Total number of nodes (1-255). Use 1 for single-node systems.
Turn on if you have problems with multiple nodes, otherwise leave off.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
%%file shows file, !!file runs script, ^Xtext sends header, '^M' for ENTER.
Directory with Sys75.Exe and Sys75.Cfg.
Directory for data files.
Directory for NetMail receive/send functions.
Directory to hold files attached to messages/email.
Directory to hold *.Mnu and *.Cmd (menu data files).
Directory to hold *.Scr (script files).
Directory to store the message base data.
Directory to store file area data, not the actual files.
Directory to hold files that failed the upload tests.
Directory to hold door program batch files.
Directory to hold Login.*, Chat.*, and other assorted files.
Directory to store files downloaded from the DumbTerminal.
Directory to upload files from while in the DumbTerminal.
ACS string for Master Sysops. Ctrl-F for help on ACS.
ACS string for Co-Sysops. Ctrl-F for help on ACS.
ACS string to EXEC in the Mini-Dos. Ctrl-F for help on ACS.
ACS string to attach files to messages/files. Ctrl-F for help on ACS.
ACS string to post mandatory messages. Ctrl-F for help on ACS.
ACS string to post anonymous messages. Ctrl-F for help on ACS.
ACS string to request return receipts. Ctrl-F for help on ACS.
ACS string to be exempt from the top-ten stats. Ctrl-F for help on ACS.
ACS string to make user multi-node chat available. Ctrl-F for help on ACS.
K per file point (1 means 1K = 1 point, 101 means 101K = 1 point).
% of file points to give to uploader for files uploaded.
% of time to give to uploader for time spent uploading.
% of file points to give to uploader for files downloaded.
Auto validate all uploads? If OFF, they must be manually validated.
# of lines of description to use; 0 = no descriptions.
Minimum free space on upload drive to receive uploads.
Use the internal file tester?
Path name and command lines for the upload tester anti-virus program.
Uploads with newest file older than this date will fail upload test.
Text file list of files to add to uploaded archives. (loaders, adds, etc)
Comment file to add to archives.
Text file list of files to remove from uploaded archives. (group nfo's, etc)
Run Maintain.Bat in upload checker?
Result code from the anti-virus program above indicating viral infection.
Maximum K in temporary processing directory.
Search current conference for duplicates before alowing uploads?
Search all conferences? (can be slow)
Name of QWK packet to send.
Ignore user's time for QWK downloads?
Maximum msgs in a QWK packet.
Maximum msgs per base in a QWK packet.
Can message sponsors kill their bases?
Can message sponsors delete messages from their bases?
Minimum space on drive for post.
Character drawn on left of lite bar prompts. ^U for ascii chart.
Use New User Voting? If no, users will be passed to Sysop for validation.
Auto val/del user based on nuv votes? If NUV turned off, vals all new users.
Number of yes votes to validate. (1-255)
Number of no votes to delete. (1-255)
Hang up on unvalidated users?
Require new users to upload as part of the new user application?
Require new users to post a message as part of the new user application?
Send new user's application feedback to which user? (user #)
Infoform for New User Voting. (1-5, 0 to allow voters to see all forms)
Give what flags to validated users? Ctrl-F for a list of flags.
The default security level for validated users.
The default download security level for validated users.
The default number of file points for validated users.
The default upload/download ratio for validated users; 0 disables.
The default upload/download k ratio for validated users; 0 disables.
The default maximum download K per day for validated users; 0 disables.
The default post per call ratio for validated users; 0 disables.
The default user note for validated users.
The default time limit for validated users.
Shortest allowed password length (1-30).
Days from user's first logon until user expires and expired levels are used.
The default security level for expired users.
The default download security level for expired users.
The default maximum calls per day for validated users; 0 disables.
The default credit for validated users.
The default debt for validated users.
Infoform #1 name, blank to disable.
Is infoform #1 name mandatory?
Infoform #2 name, blank to disable.
Is infoform #2 name mandatory?
Infoform #3 name, blank to disable.
Is infoform #3 name mandatory?
Infoform #4 name, blank to disable.
Is infoform #4 name mandatory?
Infoform #5 name, blank to disable.
Is infoform #5 name mandatory?
Com port to use (1-4, 0=local node. For fossils, use fossil port # (0-3)).
How big should your input buffer be? (specify bytes)
How big should your output buffer be? (specify bytes)
Use what FIFO level? (For 16550 UART chips only, 0 = disable)
Reinit modem after how many idle minutes in WFC?
Internal UART (RECOMENDED!), external Fossil Driver, or DigiBoard driver.
Answer modem on which ring? (1-255)
Answer on RI signal or wait for modem to send RING code? (NO for fossils)
The infamous init string. | for CR, ~ for  second pause, ^X = Control-X.
Modem answer string. | for CR, ~ for  second pause, ^X = Control-X.
Modem hang-up string. | for CR, ~ for  second pause, ^X = Control-X.
Modem off-hook string. | for CR, ~ for  second pause, ^X = Control-X.
Init baud rate. (SpaceBar to advance)
Lock port baud rate?
Flush modem buffers after file transfers?
ACS required to logon to this node. Ctrl-F for help on ACS.
Path to the data files related to this node.
Path to temporary files for this node.
Minimum logon baudrate.
Minimum download baudrate.
Name for WFC program.
Complete pathname to program to run (Example: C:\Dos\Edit.Exe).
Command line paramaters for the program.
Load Command.Com before running the program? (for running batch files)
Swap memory before running the program?
Wait for a keypress after the program finishes running?
Allow new users to apply to your board?
Maximum percentage of local users on your board. (100 disables)
The amount of information stored in the Sysop logs about the user.
Allow users to use RIP emulation?
Number of votes this user casts per vote in NUV.
ACS required to run ANY menu command. Ctrl-F for help on ACS.
Days in blacklist if deleted by NUV. (0 don't add, -1 immediate, -2 forever)
Character to use in boxed input fields. ^U for ascii chart.
Character drawn on right of lite bar prompts. ^U for ascii chart.
IRQ line (0 = Default; Defaults: Com1=IRQ4; Com2=IRQ3; Com3=IRQ4; Com4=IRQ3)
Base in hex (0 = Default;  Defs: Com1=03F8; Com2=02F8; Com3=03E8; Com4=02E8)
Vector (0 =  Def; Def: IRQ2=0A; IRQ3=0B; IRQ4=0C; IRQ5=0D; IRQ6=0E; IRQ7=0F)
Password required for auto-validation after user applies.
ACS required for users to vote no new users. Ctrl-F for help on ACS.
String displayed in upload processor as each item is working
String displayed in upload processor when each item is finished working.
Character used to indicate a file has been tagged.
