*****************************************************************
Comments entered by========> RON LOTTERMANN

Michael Gray - Publisher:

 The only complaint that I have is that the text files that scroll do
not stop after a full screen. They just roll by. I have scroll back but
it is a pain. Could you please put a PAUSE prompt after each 24 lines?

 Also, I am running a two line BBS... Node 1 is a generic 2400 baud and
node 2 is a USR DS locked at 19200. I had a problem with Wildcat! and
it's DOS HOOK and your configuration file. I needed one for each node.
The high speed line would not work if the baud rate was not locked and
vice versa. Here is how I solved the problem...

Put a separate BATCH file in each NODE directory for Wildcat! (3.55).
Make a config file for IO with the nodenumber in it. Then you can have
separate locked baud rates, etc if you need it. The batch file was
modified as such:

cd\wc30\doors\io
IO IO1.CFG   <---- Or whatever node number is calling the batch
file.
exit

 I hope this helps if you have any other Wildcat! sysops out there
trying to run it under multiline.

In Reply ********************************************************

Dear Ron,

  The problem with the scrolling hopefully has been corrected, as best
 we can tell it is all working fine now.

  Thanks very much for the information on setting up for multinode will
 be sure to pass this information on to others who are experiencing the
 same problem.
                      Michael Gray - Publisher

                      -==-==-==<>-==-==-==-

