COMPATIBILITY STATEMENT
C&D Programming's CacheAll Version 1.0 is compatible with LANtastic NOS 
version 4.x.

PRODUCT OVERVIEW
CacheAll is a disk-caching program which can cache all DOS compatible 
devices accessible through a drive letter, including local hard disks, 
network'ed drives, CD-ROM drives, WORM drives, etc.  3 types of memory 
configurations are supported: extended, XMS and EMS.  You can also use your 
local hard drive as additional cache memory.  
By default, CacheAll only caches files which are open with Deny Write or 
Exclusive sharing privileges.  It is designed for speeding up read operations 
on the workstation side, whereas the LANtastic LANCache caches the local 
physical disk drives and is geared towards write operations on servers.

INSTALLATION:
If you are installing CacheAll on a LANtastic server for use by various 
workstations, you should complete the following steps:
1.      Install the CacheAll program onto a LANtastic server by running the 
CacheAll INSTALL program from the distribution diskette.  The installation 
program will automatically create the program directory, C:\CACHEALL by 
default.
2.      Set up a sharable resource (e.g. \\SERVER\CACHEALL) on the server 
with default Access Control List (ACL) using NET_MGR.  No special 
ACL's are necessary.
3.      Set up LANtastic Group and/or Individual accounts with correct 
privileges using NET_MGR.  No special privileges are necessary.
No special workstation installation is needed.  You can just log onto the 
CacheAll server, redirect a drive to point to the appropriate resource and 
run the CacheAll program. 

CONFIGURATION:
CacheAll must be executed after all components of the LANtastic network have 
been started, especially REDIR and SERVER.  During our testing, we did not 
find any problems with CacheAll co-existing with LANCache on the same 
machine.  The minimum amount of memory required by CacheAll is 18K and it 
can be loaded high.  CacheAll has many command line options to configure its 
performance and memory usage.  Refer to the documentation for a listing of 
all options.  




NETWORK DISCONNECTS
Network disconnects produce the same type of errors that DOS produces.  For 
example, if P: is a cached network drive, a disconnect will produce the 
following error message:

Server connection to network node NODE01 broken reading drive P
Abort, Retry, Fail?

SUMMARY
This document has been designed to help with the installation and setup of 
CacheAll in a LANtastic network environment.  If a problem arises which 
cannot be resolved through this bulletin, please contact our technical 
support staff at (602) 293-6363.

Any questions or suggestions regarding this bulletin may be mailed to our 
offices:

	Artisoft, Inc.
	691 East River Road
	Tucson, AZ  85704
	ATTN: Compatibility Department

VENDOR INFORMATION:
C&D Programming, P.O. Box 1305, Brentwood, NY 11717.  Phone 
516-434-3214. Fax 516-434-7603. BBS 516-434-8712. Sales 800-847-5676.










ARTISOFT, Inc. makes no warranties as to the completeness or accuracy of this document.  LANtastic is 
a trademark of ARTISOFT, Inc.  Brand names and product names are trademarks of their respective 
companies.


COMPATIBILITY BULLETIN
Product Reviewed: CacheAll v1.0 from C&D Programming
Classification: Disk / File Utilities
Date: 2/2/93                            Page 1 of 2


^`kYps4||cEPVjUYENIAwm=K,ra++UsG{uzdI(vVTD"siEYM]CRW'L6\XN@]GED"[BhA3<e(y#_^KB)-hofgbCZX
IE]
uTBE__[eE'lIO]OT _a^'jL^T[/O>0c@P
UC3Zxy UQk 2YVXA
PrqY3\TCGC
L7 1l`(kaV[Xiy&RO'VB!Q
T- 
 !A_!@Pt7{y`u


