                    F3PADLK for FALCON 3.0 version 3.01.1

                        By: Ken "Stinger" Richardson
                            UID: [70761,301]

        F3PADLK is a terminate and stay resident program that will add small 
indicator lights to Falcon's Padlock and "Scrolled up" views. These lights 
indicate Afterburners, AirBrake, Radar, and ECM. Each indicator has it's own 
letter and color for easy identification. 

No modification is required to the Falcon program. Simply run the F3PADLK
program, or use LOADHIGH to load it into high memory. After F3PADLK is loaded
it will automatically check to see if Falcon is running. If Falcon is running
it will automatically "attach" itself. If Falcon is not running, it will 
simply lay dormant in memory until it senses Falcon. To Uninstall F3PADLK, 
just execute the F3PADLK.COM program a second time. This will remove the TSR 
from memory.

F3PADLK also has a feature that will allow you to remap your COM3 and COM4
ports to COM1 and COM2 respectively. This will allow people to connect with
Falcon, in one of the communications modes, using COM3 or COM4. To enable the
COM port remap feature, add the /3 or /4 switch after typing F3PADLK. For
example: Type F3PADLK /3 to remap COM3 to COM1
           or F3PADLK /4 to remap COM4 to COM2

The F3PADLK program uses roughly 900 bytes of memory and can be loaded HIGH 
with the LOADHIGH command, therefore saving precious conventional memory.

        This utility is not supported by Spectrum Holobyte in any way so if
you experience any problems contact me via Compuserve EMail or the MODEMGAMES
forum on Compuserve (GO MODEMGAMES).

                                        -Enjoy!

                                         Stinger

File list:
              F3PADLK.COM - Padlock TSR itself. This file must be loaded before
                            running Falcon.
              F3PADLK.TXT - This file.
       

