Posted-By: auto-faq 2.4
Archive-name: inn-faq/part4

Last Changed: $Id: FAQ-inn.4,v 1.2 1994/02/04 16:20:28 tal Exp $

This is a separate guide for installing INN addressed to 
UNIX and System Administration novices.  It is written for 
installation of INN 1.4 on a Sun SPARCstation 10/30 running 
Solaris 1.1 (SunOS 4.1.3).  This guide is maintained by 
Norman J. Pieniazek (norman@giardia.pdb.cdc.gov).  Please 
send updates and corrections to him.

This guide is composed of following parts:

  I. SYSTEM REQUIREMENTS
 II. INSTALLATION OF INN 1.4
III. UPGRADING FROM INN 1.3 TO INN 1.4
 IV. MAINTENANCE OF INN
  V. INSTALLATION OF XVNEWS, A SUN OPENWINDOWS
     NEWSREADER



I. SYSTEM REQUIREMENTS

  1. INN will not install nor run on Sun SPARCstation under
     plain Solaris 1.1 unless you install some software
     packages and utilities.  Also, your machines IP number
     has to be entered in a Domain Name Service database
     (DNS) to be resolvable.  Ask your Network Administrator
     about DNS or read the O'Reilly & Associates, Inc.
     book: "DNS and BIND by Paul Albitz & Cricket Liu,
     ISBN 1-56592-010-4.
     
     Further, test the resolver on your machine by
     pinging a hostname not entered in your /etc/hosts file.
     For example, type: 
      ping ncbi.nlm.nih.gov
     The response should be:  "ncbi.nlm.nih.gov is alive".
     If you get: "unknown host", consult the O'Reilly book.
   
  2. Be sure to su to root before performing tasks
     outlined below.  Next, check if you have a directory
     /usr/local and about 90 Mb of space in the partition
     where this directory is located.  Create directories:
     /usr/local/bin, /usr/local/lib and /usr/local/man if
     you do not have them.  Add /usr/local/bin to your path
     and /usr/local/man to your MANPATH. 
         
  3. INN uses gnu versions of grep, awk and sed.  Moreover,
     it is  recommended to compile INN with the gnu
     versions of make and the gnu gcc compiler instead of
     the Sun's unbundled cc compiler.  If you don't have
     the gnu software package, create a directory
     /usr/local/gnu, cd to this directory and ftp to
     aeneas.mit.edu (18.71.0.38). Go to
     directory /pub/gnu and get the following files
     (versions as of February 4, 1994):

      bison      bison-1.22.tar.gz    
      gawk       gawk-2.15.4.tar.gz
      gcc        gcc-2.5.8.tar.gz
      grep       grep-2.0.tar.gz
      gzip       gzip-1.2.4.tar
      make       make-3.70.tar.gz
      patch   patch-2.1.tar.gz
      perl   perl-4.036.tar.gz
      sed        sed-2.03.tar.gz
      texinfo    texinfo-3.1.tar.gz

     Installation of these programs is quite complicated,
     but is really beneficial.  After you complete the
     installation, check if older versions of these programs
     are not present somewhere in your path.  Delete or
     rename these old versions.

   a. Start with gzip.  In /usr/local/gnu type:
      "tar xvf gzip-1.2.4.tar".  A directory gzip-1.2.4 will
      be created.  Change to this directory and type:
      "sh ./configure".  Next, edit the Makefile
      with the vi editor and change the line starting with
      "CC" to read: "CC = cc". Then, type: "make".
      Compilation should complete without errors.  Finally,
      type: "make install" to complete installation of gzip,
      gunzip, and other utilities in /usr/local/bin.     
  
   b. Compile and install texinfo - info, makeinfo, the GNU
      hypertext system.  Makeinfo is needed for successful
      installation of many GNU programs and utilities.
      In /usr/local/gnu type: "gunzip texinfo-3.1.tar.gz".
      Next, type: "tar xvf texinfo-3.1.tar".  A directory
      texinfo-3.1 will be created.  Cd to this directory
      and type: "sh ./configure".  Next, edit the Makefile
      as described above for gzip.  Now, type: "make"
      and ignore any non-fatal errors.  Finally, type:
      "make install".

   c. Uncompress, compile and install gnu make.  Follow the
      steps described for texinfo.  Gnu make will install in
      /usr/local/bin.  To disable Sun's make, cd to /usr/bin
      and type: "mv make make.sun".

   d. Compile and install bison following the procedure
      described for texinfo.

   e. Uncompress gcc.  Cd to /usr/local/gnu/gcc-2.5.8 and
      type:
        sh ./configure --target=sparc-sun-sunos4.1
      Next type:
        make LANGUAGES=c
      This step will take about 17 minutes to complete.
      Ignore warnings reported for insn-emit.c.  Next, type:
        make stage1
      Ignore reported non-fatal errors.  Next, type:
        make CC="stage1/xgcc -Bstage1/" CFLAGS="-g -O"\
        LANGUAGES=c
      This step will take about 19 minutes to complete.
      Next, type:
        make stage2
      Ignore reported non-fatal errors.  Next, type:
        make CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O"\
        LANGUAGES=c
      In this step, which lasts about 13 minutes, you will
      make the final stage 3 compiler.  Now type: "make
      compare". No errors should be reported here.  Finally,
      type:
        make install CC="stage2/xgcc -Bstage2/" CFLAGS="-g\
        -O" LANGUAGES=c
      to install the gcc compiler.  It is advisable to
      recompile patch, gzip, texinfo, make and bison with
      gcc.  It will be a good test for proper gcc
      functionality.

   f. Uncompress gawk. Cd to directory gawk-2.15.4 and type:
        ./configure sunos41
      Next type: "make".  When gawk will compile, type:
        make install
      Finally, disable Sun's awk by typing:
        mv /usr/bin/awk /usr/bin/awk_sun
      and create a link to gawk for awk by typing:
        ln -s /usr/local/bin/gawk /usr/bin/awk

   g. Uncompress grep.  Cd to directory grep-2.0 and type:
        ./configure
      Next type: "make" and "make install".  Grep will
      also be installed in /usr/local/bin as fgrep
      and egrep.  Finally, as some programs expect to find
      grep, egrep and fgrep in /usr/bin, disable Sun's grep
      and create appropriate links, just like described
      for awk.  INN expects to find a program "egnugrep" in
      /usr/local/bin.  Create it by typing:
         cp /usr/local/bin/egrep /usr/local/bin/egnugrep

   h. Uncompress sed and patch.  Compile and install these
      utilities following the instructions for grep.


   i. INN comes with some scripts written in the perl
      language.  Uncompress perl, cd to directory perl-4.036
      and type:
       sh ./Configure -d
      and hit Return for default answers to all questions.
      Next, type: "make depend", then "make".  Now type:
       make test
      to check, if perl works without errors.  Finally,
      type:
       make install
      to complete installation of perl.



II. INSTALLATION OF INN 1.4


  1. As root, create directories: /usr/local/inn1.4 (this
     will be your $inn directory) and /usr/local/news.

  2. Cd to $inn. Get: inn1.4sec.tar.Z from ftp.uu.net
     (192.48.96.9).  This file is in the directory:
     /networking/news/nntp/inn.   As for all files, please
     remember to set the file type in ftp to binary.

  3. From the same source and directory get the Frequently
     Asked Questions (FAQ) files:
       faq-inn-1.Z
       faq-inn-2.Z
       faq-inn-3.Z
       faq-inn-4.Z (this file)
       faq-nov.Z

  4. To uncompress the FAQ files type: "uncompress faq-* .
     Print the FAQs and read them before proceeding further.

  6. In $inn type: "zcat inn1.4sec.tar.Z | tar xvf -".  This
     will install inn files for compilation.

  7. Change directory to $inn/config, and type:
       cp config.dist config.data
       chmod 644 config.data
     Now use the vi editor to edit config.data.  You should
     select gcc as the compiler by changing the line that
     starts with "CC" to read "CC   gcc".  Many lines in
     config.data define the location of various files
     and directories.  It's OK to leave defaults, but
     check if you have ample space in the partition
     where the articles will be stored (/var/spool).  More
     information on where INN expects to find certain files
     is in: $inn/samples/innshellvars.  If necessary, edit
     the config.data and innshellvars to reflect your
     configuration.  Please make sure that specified
     directories and utilities exist on your system.
    
  8. Change directory to $inn.  Type: "make world".  Now
     type:
       cat */lint
     Here, you will get a list of compiler warnings and
     errors.  In addition, "make" created in this step
     a file:  "$inn/Install.ms".  Print it by typing:
       nroff -ms Install.ms | lpr
     Install.ms is a manual for installation of INN written
     by Rich Salz, the author of INN.  There is a lot of
     important and interesting information in his manual.

  9. If you got no fatal errors from make, go to the
     $inn/site directory
     and type: "make all".

 10. There are some scripts and control files listed in
     inn-faqs and Install.ms that may be modified at this
     point.  For most installations, the default settings
     are OK.

 11. Now cd to $inn and type: "make install" to complete
     basic installation of INN.

 12. To finish installation of INN, run the BUILD script
     in the $inn directory by typing "sh BUILD".  This
     script will ask a series of configuration questions
     that are easy to answer.  Please note that if your have
     "history.*" files in your /usr/local/news directory
     from a previous or failed installation of INN, the
     BUILD script will not complete.  Rename them to
     "old.history.*" and re-run the BUILD script.

 13. You need a site that will feed news to you.
     This will depend on your geographic location and
     organization.  Ask a System Administrator of a site
     close to you for hints.

 14. Ftp to your newsfeeding site and get the "active" file
     from there.  Place this file in your /usr/local/news
     directory and edit it to your taste.  Remember to
     include the "control" and "junk" newsgroups.  Also, you
     have to edit the following files in /usr/local/news:
     newsfeeds, hosts.nntp and nnrp.access.

 15. To check for syntax errors in INN control files,
     file ownership, permissions and other things type:
       /usr/bin/perl /usr/local/news/bin/inncheck
     and correct any errors reported by inncheck.

 16. Look at the file "rc.news" in /usr/local/etc.
     It's advisable to enable the innwatch utility.
     Innwatch will throttle the newsserver when your disk
     will get full and prevent crashes.  Change the line
     starting with "DOINNWATCH" to read "DOINNWATCH=true".
     Now type: "sh /usr/local/etc/rc.news"
     and look in /var/log/syslog for errors.  Also, type:
       ps -aux| grep news
     and check, if the innd process owner is news.

 17. In /etc/aliases create an entry: "usenet: <you, or
     root>".  Next type: "/usr/ucb/newaliases" to inform the
     sendmail program that the aliases file has changed.
     If you are running YP (NIS) on your network, you may
     optionally add the "usenet" alias to your YP aliases
     file.  If the machine you are installing INN on is the
     YP master and the file "/etc/aliases" is the source of
     the YP aliases map, you should type: "cd /var/yp"
     followed by "make".  Reboot and restart innd (see #16). 
   

 18. To get daily reports on the newsserver activity from
     the "news.daily" script and to enable the "expire"
     utility type: "/bin/crontab -e news" and insert the
     following line:
       40 23 * * * /usr/local/news/bin/news.daily delayrm
     or, if you are using overchan (in newsfeeds):
       40 23 * * * /usr/local/news/bin/news.daily delayrm\
       expireover

 19. To set-up complete logging of the server activities
     and have them ready for a report by the "news.daily"
     script, you have to edit your /etc/syslog.conf file.
     Insert at the end of this file the content of
     the syslog.conf file written by Rich Salz.  This file
     is in: $inn/syslog.  Please check, if you have the
     directories and files mentioned in Rich's syslog.conf.

 20. Run tests from your machine to the server (to your
     machine at telnet port 119).  See inn-faqs for details.

 21. After completing these test, be sure to delete the
     entry for your machine from the hosts.nntp file.  If
     you will not do it, your machine will be treated as a
     "feeder" and not as a "reader".

 22. Set posting. 

      a. Edit the /usr/local/news/newsfeeds file and add:
           <alias for your feed>/<full address of feed\
           :*\ (for all local postings)
           :Tf,Wnm: (standard entry)

      b. Edit /usr/local/news/nntpsend.ctl file and add:
           <alias for your feed>:<full address of feed>::\
           -T1800 -t300

      c. Type: "/bin/crontab -e news" and insert a line:
           0,10,20,30,40,50 * * * *\
            /usr/local/news/bin/nntpsend
  
      d. Run inncheck (see #15).

      e. Post to misc.test and include "reply" in the
         Subject line, automatic responses will be mailed to
         usenet (see #17) within a few minutes.

 23. To start innd automatically at bootup, include at the
     end of your rc.local the following lines:

      #
      # Start INN news service - Internet News Daemon (innd)
      #
      if [ -f /usr/local/etc/rc.news ]; then
         /usr/local/etc/rc.news; echo "Starting INN news
     service"
      fi

 24. Watch the news.daily reports in your mail for any
     additional errors.  To run the news.daily script
     at any time manually, FIRST SU FROM ROOT TO "news"
     and type: "/usr/local/news/news.daily".  A mail to
     "usenet" should arrive within a couple of minutes
     and may report important configuration problems.


III. UPGRADING FROM INN 1.3 TO INN 1.4

  1. Stop the server.  Type:
       ctlinnd shutdown "upgrade"

  2. Create a directory /usr/local/inn1.4, this will be
     your $inn directory.  cd to $inn.  Next, ftp to
     ftp.uu.net, cd to directory: /networking/news/nntp/inn
     and get the following files:

        inn1.4sec.tar.Z
        faq-inn-1.Z
        faq-inn-2.Z
        faq-inn-3.Z
        faq-inn-4.Z (this file)
        faq-nov.Z
     Uncompress and print the FAQs.  Next, type:
        zcat inn1.4sec.tar.Z | tar xvf -

     Print the README file.  To print the Install file,
     type: "make Install.ms" followed by:
        nroff -ms Install.ms | lpr

  3. Now, cd to $inn/config and type the following commands:
        make subst
        cp config.dist config.data
        ./subst -f {OLDFILE} config.data
     where {OLDFILE} is the location of config.data in your
     INN 1.3 directory.  Be sure to check, if in your old
     config.data the "CC" line reads "CC  gcc".
     Ignore warnings about new lines.  Next, type:
        make sedtest
     No errors should be reported here.  Now, cd to $inn
     and type this series of commands:
        make quiet
        cd ../lib
        make libinn.a lint
        cd ../frontends
        make all
        cd ../innd
        make all
        cd ../nnrpd
        make all
        cd ../backends
        make all
        cd ../expire
        make all
        cd ../site
        make all
        cd ..
        make update

  4. Restart innd.


IV. MAINTENANCE OF INN

 1. Adding new groups - see also Part IV, Section 3.b,:

     a. Type: "ctlinnd pause 'edit active'"

     b. Edit the active file.  The format is:
          groupname himark lomark flag.
        Set himark to 0000000000 and lomark to 0000000001.

    c. Run inncheck (see #11) to check the new active file
       for errors. 
  
    d. Type: "ctlinnd reload active 'new active'".

    e. Type: "ctlinnd go 'edit active'".


 2. New groups are sometimes added automatically through
    a control message.  A mail message to usenet will alert
    to such an automatic change to the active file.  If you
    do not want to subscribe to a particular news group,
    change directory to /usr/local/news and type:
      ctlinnd rmgroup <group name>

 3. Sometimes, a mail message will arrive for usenet with
    a checkgroups file.  Remove header, save the body of
    the message in:
      /usr/local/news/bin/control/news_control/news_control_
     todaysdate
    cd to that directory and type:
      ../docheckgroups <news_control_todaysdate
    >todaysdate_pre
    Read the output file (todaysdate_pre) and carry out all 
    the instructions that you think pertain to your
    situation.  Read the man pages for "active" and "ctlinnd"
    for more info.  To implement the changes, you will have to
    change to the directory: /usr/local/news and:  
    
     a. remove a discontinued group:
          type: "ctlinnd rmgroup <group name>"

     b. add a group:
        type: "ctlinnd newgroup <group name> flag <creator
                                           name>"

     c. mark a group correctly:
        type: "ctlinnd changegroup <group name> flag"

    Run inncheck and repeat the docheckgroups command from
    the /usr/local/bin/control/news_control directory
    by typing:
      ../docheckgroups <news_control_todaysdate
                                >todaysdate_after
    Correct any reported problems.  Also, you may have to
    edit the /usr/local/news/newsgroups file to reflect
    any changes you introduced.

 4. Subscribe to and read the following newsgroups:
      news.software.nntp
      news.software.readers
      

 5. IMPORTANT!!! Never run fsck on the drive where the
    /spool/news files are located while running INN.  Innd
    has a lot of active disk I/O going on and fsck will show
    a lot of errors.
    Use ctlinnd to throttle,  pause, or shutdown innd first
    - see the manual page for ctlinnd.


  V. INSTALLATION OF XVNEWS, A SUN OPENWINDOWS
     NEWSREADER

   1. Create a directory /usr/local/xvnews2.1 and cd to this
      directory.

   2. Ftp to dutiws.twi.tudelft.nl and get the file
      xvnews.tar.gz from directory /pub/news.

   3. Ungzip and untar xvnews.

   4. Use your vi editor and edit the file xvnews.h
      You will need to enter your settings for:
        DOMAIN         (on my machine: "pdb.cdc.gov")
        ORGANIZATION   (on my machine: "Centers for Disease
                          Control Atlanta, GA, USA")
        NNTPSERVER     (on my machine:
                               "giardia.pdb.cdc.gov")
      These defaults can be overridden by environment
      variables (see the xvnews man page).

   5. Compile xvnews by typing: "make".  I get some errors
      on my system, but the program runs OK.  Copy xvnews
      to /usr/local/bin and xvnews.man to directory:
      /usr/local/man/man1 as xvnews.1

-- 
S ******************* I do not speak for Mentor Graphics Corp ********
W    Anonymous FTP: vector.casti.com /pub/QRD/events/stonewall25
2  WWW/Mosaic/Lynx: http://vector.casti.com/QRD/Stonewall25.html
5    gopher: vector.casti.com select 10, 1, 24, 29.  or call +1-212-242-7366
