 ͻ
                                                                          
            Inboard 386/PC Video Board Compatibility: A-P                 
                                                                          
 ͼ

 AST 3G

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 ATI VGA WONDER CARD

     This board is compatible with the Inboard 386/PC.

 ATI VIP

     This board is compatible with the Inboard 386/PC.  However, you must
     turn OFF the autoswitch feature (SW8),  or the computer will report a
     PARITY CHECK 2 error on power-up.  ATI provides software that reenables
     autoswitch mode once the machine has powered up.

 ATI WONDER CARD

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.  However, a "Coprocessor Switch Enabled...." message is
     displayed on warm boot if the board's Autoswitch feature (SW8 on the
     ATI board) is turned on.  Disabling the Autoswitch feature solves this
     problem.

     One customer reported Parity check 2 errors occurred on warm boots.
     Turning off Autoswitch also solved this problem.

 COMPAQ EGA

     This board is compatible with the Inboard 386/PC.  If the computer
     fails to power up, check the settings of the four switches at the end
     of the EGA board.  Make sure they aren't set for a COMPAQ Dual-Mode
     monitor.  The following settings do NOT work:

                   sw1  sw2  sw3  sw4
          -
       setting1    off  off   on  off
       setting2    on   off   on  off

     Refer to the COMPAQ EGA manual for the correct settings.

 EVEREX MICRO ENHANCER EGA VERSION 3.0

     Customers report when the Everex EGA is installed in autoswitch mode
     with Inboard 386/PC, the keyboard doesn't respond.  Disabling
     autoswitch mode solves this problem.

     Also, the EGACACHE parameter on the INBRDPC.SYS line in the CONFIG.SYS
     file causes a blank screen whenever you load software that uses color.
     Removing EGACACHE solves this problem.

 GENOA SPECTRA

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 HERCULES MONOCHROME/GRAPHICS ADAPTER

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 HERCULES COLOR PLUS DISPLAY ADAPTER

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 HEWLETT PACKARD EGA

     Several customer reports indicate the Inboard 386/PC is incompatible
     with this board.  When using graphics modes, text will be corrupted and
     may appear in wrong places on the screen.

 IBM EGA

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 IBM MONOCHROME

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 IBM VGA

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

 ORCHID PRO DESIGNER PLUS VGA

     This board is compatible with the Inboard 386, but incompatible with
     EGACACHE.  Using the EGACACHE parameter on the INBRDPC.SYS device
     driver line causes the computer to lock up.

 ORCHID TURBO EGA

     Customer reports that this board is incompatible with Inboard 386/PC.
     The Turbo EGA is a hybrid EGA/accelerator card with an 80286 CPU and a
     cable (similar to the Inboard 386/PC cable) that runs to the 8088
     socket.

 PARADISE AUTOSWITCH EGA

     Intel has tested this product with the Inboard 386/PC, and they are
     compatible.

     However, ILIM386 won't work with this board in Autoswitch mode.  Either
     disable the autoswitch feature when using ILIM386 or remove ILIM386 and
     use another expanded memory manager (such as Above Board with EMM) for
     expanded memory.

     One user reported that this board caused a parity check 2 error when
     IRMA emulation was invoked.  Another video board worked fine.

 PARADISE BASIC EGA

     This board is incompatible with all accelerator boards in IBM PC XTs
     using the 11/08/82 ROM BIOS.  Contact Paradise for a PAL upgrade to
     correct the incompatibility.

 PARADISE MGC-1

     This board is incompatible with the Inboard 386/PC and most other
     accelerator boards (according to PARADISE Systems).

 PARADISE PLUS VGA

     This Board may conflict with the 11/08/82 IBM PC XT BIOS.  Though
     Inboard 386/PC doesn't cause the problem, it may expose the problem.
     If you have this problem, contact Paradise technical support at (800)
     635-5818.

 PARADISE VGA

     This product is compatible with the Inboard 386/PC.  The ROM BIOS for
     this board uses addresses C000-CBFF.



End of file                 Intel FaxBack # 2628          July 17,1992
