                           TECHNICAL BULLETIN
                             Bulletin #1-267

Date:  April 4, 1990


                NetWare Version 2.15C Update Script Files

The current NetWare v2.15C Update Kit requires a workstation with two
diskette drives of the same media.  The update kit will only update floppy
diskettes.  Several script files have been written to allow the update to
be performed without this diskette drive requirement.  These files are
available on NetWire.  Please note that you must have a valid COMSPEC
statement in your workstation environment that points to a device other
than drive A: or B:.  This is explained further in technical bulletin #261. 
The following is a list of the script files and a description of what each
file does:

*  HDS525.ARC  This file is used to temporarily copy the contents of the
               update diskettes to hard disk (drive C by default).  It
               will prompt the user for the various diskettes that need
               to be downloaded; it will also clean up the files and
               directories on the hard disk when it is finished.  (This
               file is for SFT or Advanced NetWare 5.25" media only.)

*  HDS35.ARC   This file performs the same function as HDS525.ARC, but is
               for SFT and Advanced NetWare 3.5" media only.

*  HDE525.ARC  This file performs the same function as HDS525.ARC, but is
               for ELS NetWare Level II  5.25" media only.

*  HDE35.ARC   This file performs the same function as HDS525.ARC, but is
               for ELS NetWare Level II 3.5" media only.

*  ULS525.ARC  This file is used to copy the contents of the update
               diskettes to the network directory structure created by
               NETGEN preparatory to network generation (F:\NETWARE by
               default).  This file allows the user to use the network
               generation method after the update procedure is completed. 
               (This file is for SFT or Advanced NetWare 5.25" media only.)

*  ULS35.ARC   This file performs the same function as ULS525.ARC, but is
               for SFT and Advanced NetWare 3.5" media only.

*  ULE525.ARC  This file performs the same function as ULS525.ARC, but is
               for ELS NetWare Level II 5.25" media only. 

*  ULE35.ARC   This file performs the same function as ULS525.ARC, but is
               for ELS NetWare Level II 3.5" media only.

Each archive includes a script file and a batch file. The script files
replace the REVC.xxx script files used by RED.EXE.  Each script file has
a built-in "readme" that explains how the file is to be used.  Use the
batch file to initiate the UPDATE procedure.