Windows Notice Groupware for NetWare Networks and Windows Version 1.4 User Manual John Calcote & PCRx Disclaimer Disclaimer Windows Notice is distributed as is. Windows Notice was written and tested on a Novell NetWare 3.11 file server internetwork. As far as the author is able to ascertain, it is not harmful in any way to any version of NetWare from 2.0a through 3.11. The author will not be liable for any damage to the network caused by the use or misuse of this product. Windows Notice is protected by the copyright laws of the United States of America. WNotice Version 1.4 for NetWare GroupWare by John Calcote & PCRx Documentation Date 9/15/92 Page 2 Use Use From the main dialog box, you as the user may choose to display a message, check the location of another user, or clear a persistent message. The User Maintenance button is disabled unless you are Supervisor or Supervisor equivalent. The Display Message Dialog Box The Display Message Dialog Box Display Message allows one to either display a message on the screen and store it in his or her bindery object's user status property for others to read. Or just store the message in the bindery object property and return. The latter method is called a persistent message, meaning that the message is active even though it is not being displayed on the workstation. The Display Message dialog box has many options, most of which are self explanatory. Among these are: Speed, which may be set to Fast, Medium or Slow; Typeface, which may be set to Roman (Serifed font) or Swiss (San Serifed font). Any time this dialog box is displayed, favorite display strings may be added to the favorites list box. When favorites are added in this manner, they are included in the WNOTICE.INI file in the windows sub directory and thus are made permanent. Finally, the No Display and Persistent Message check boxes allow a user to activate a bindery message without displaying it. The state of these two check boxes are tied to one another, because the use of the No Display check box implies Persistent Message as well, as it makes no sense to set No Display then and not set Persistent Message -- you would be telling it to do nothing. However, you might set Persistent Message without setting No Display. This would mean you with the message to remain active when the display is cancelled. The WhereIs Dialog Box The WhereIs Dialog Box WhereIs is the complement of Display Message. WhereIs allows a user to display a message activated by another user. The WhereIs dialog box contains a list box with a WNotice Version 1.4 for NetWare GroupWare by John Calcote & PCRx Documentation Date 9/15/92 Page 3 list of Windows Notice users. Scroll to the desired user and that user's message will appear in the message box, and the date and time the message was entered will appear in their proper fields as well. The Camp option at the bottom of the WhereIs screen borrows a term from some telephone systems -- to Camp on an extension in these systems is to ask the phone system to call you back when the desired party has hung up from his or her current call. Windows Notice uses a similar technique to these phone systems. It allows a user to poll the status field of another user's bindery message. When the polled party's status changes (either from active to inactive or vice-versa) then a short alarm is sounded and the WhereIs window is restored from it's iconic state. The poll time is limited currently to about 64 seconds, however, if it is set to a higher value, it will, modulate around 64 seconds (it will become the remainder of a division by 64). The Clear Persistent Message Button The Clear Persistent Message Button This button is used to clear a persistent message previously set without entering the Display String dialog box. It does no harm to clear a persistent message if a message was never set. Leaving a message Leaving a message While you are gone and have left an active message displayed on your console, Windows Notice allows others to leave you messages. When a key is pressed (except for escape) a dialog box is popped up and the passerby is allowed to type a short message which will be stored for you and displayed when you return. Windows Notice also captures Network broadcasts to you in this same message queue. This means that another user may user the NetWare SEND command to "Send" Windows Notice a message just as if he or she had typed it in at your console while you were away. When you return and enter your password at the password dialog box, you will be shown these messages in the form of a display message dialog box. You may scroll back and forth through these messages until you are satisfied and then WNotice Version 1.4 for NetWare GroupWare by John Calcote & PCRx Documentation Date 9/15/92 Page 4 press exit to leave Windows Notice. Exiting the Display Window Exiting the Display Window To exit the Display Window when you return, simply press escape and enter your NetWare password. The message window will disappear and you will be left in Windows as it was before you started the display. If others left messages for you, you will have the opportunity to look through them before Windows Notice exits. Configuration Configuration The only configuration necessary is to set the Server = option in WNOTICE.INI (under the [StartUp] section of the file and located in the Windows sub directory), OR to set the NOTEWARE = or NOTICE_SERVER = DOS environment variables. These variables allow Windows Notice to access the server which contains bindery objects with the USER_STATUS property, in an internetwork environment. One of these variables MUST be set or Windows Notice will fail to initialize. The WNOTICE.INI file The WNOTICE.INI file You may create a file in your Windows subdirectory called WNOTICE.INI which takes the following format: [StartUp] Server=runninute ; notice server [Defaults] Speed=2 ; scroll speed 1 = slow, 3 = fast TypeFace=1 ; 1 = roman and 2 = swiss [Favorites] Str00=Out to lunch - back at 12:30 ; favorite display string list Str01=In training, back by 2:00 ; up to 99 are accepted WNotice Version 1.4 for NetWare GroupWare by John Calcote & PCRx Documentation Date 9/15/92 Page 5 The [StartUp] section contains information necessary to initialize WNOTICE properly. The [Defaults] section contains other display preference information. The list under [Favorites] is created by WNOTICE if you add strings to the favorites list box in the display dialog box, or you may add them manually to the .INI file. WNotice Version 1.4 for NetWare GroupWare by John Calcote & PCRx Documentation Date 9/15/92 Page 6