WinClip 1.2 =========== by George Campbell INTRODUCTION ============ When working with Windows 3.x software, it's often easiest to standardize on .BMP files for your clip art needs. Every Windows program can handle these images, and most paint programs, including Windows PaintBrush, included with Windows 3.0, can produce and edit these files. Unfortunately, it's been impossible to view these files quickly or to print a catalog of your clip art images. Until WinClip, that is. WinClip allows you to view your .BMP files on screen, and then print a catalog of all your files, or just the ones you select. You can even delete a file you no longer want. WinClip is so easy to use that you may not need any documentation at all. It uses the standard Windows 3.0 conventions, relying on buttons primarily, rather than menu commands. As an additional feature, WinClip allows you to edit your images, using Windows PaintBrush or any other paint program you choose. SYSTEM REQUIREMENTS =================== WinClip requires Windows 3.0, running in Standard or Enhanced mode, a hard disk and a mouse. 2 MB of RAM is needed. To edit images, you'll also need Windows PaintBrush or another program which can edit .BMP files. WinClip supports all HP LaserJet compatible printers, with a minimum of 1.5 MB of ram. It does NOT support PostScript devices. Dot matrix support will depend on the individual printer, and has not been tested. LICENSE INFORMATION =================== WinClip is a shareware program. If you use it past a reasonable (30 day) trial period, you must register your copy. Registration costs just $15, and entitles you to the latest version of the program, which will be mailed to you once your registration arrives. You'll also be entitled to telephone, mail and E-mail support for the program as well. I'll also let you know about other valuable Windows programs which are available from me at low cost. There are three ways to register this program: 1. Send a check or money order for the registration fee, written on a U.S. bank and made payable to: OsoSoft 1472 Sixth Street Los Osos, CA 93402 2. If you use CompuServe, you can register online. Log on to CIS and give the command "GO SWREG." Use the CompuServe menus to locate and register the program by name. CompuServe will bill your account for the amount of the registration fee, and I'll ship the program to you immediately. 3. If you prefer to order by MasterCard, Visa, American Express, or Discover card, contact Public (software) Library. You may call (800) 242-4775 or (713) 524-6394 for voice registration. Or FAX your order to (713) 524-6398. Or send an Email message on CompuServe at 71355,470. For FAX or Email orders, remember to include the name of the program, your credit card number, and expiration date. NOTE: THIS SERVICE IS FOR ORDERS ONLY. DO NOT CALL PsL FOR INFORMATION OR SUPPORT. Credit card orders include a $4 charge for shipping and handling. All orders will be shipped within one week. You may contact me at that address or at my CompuServe address: 71571,222 Please do not call me by telephone. Support is only available for registered users. INSTALLING WINCLIP ================== WinClip was written in Microsoft Visual Basic 1.0. All Visual Basic programs require a run-time library, VBRUN100.DLL, which must be located in your Windows main directory. If you use other Visual Basic programs, VBRUN100.DLL will already be installed. If not, you'll have to download a copy. It's available on CompuServe in the WINNEW forum, and in the MSBASIC forum. Look for the file VBRUN.ZIP. You'll also find this file on most major BBS service, or you can download it from my BBS, as VBRUN100.ZIP. Call (805) 528-3753. You may download on the first call. To install WinClip, first create a directory for the program (e.g. C:\WINCLIP\) using the DOS MakeDir (MD) command. You can also install the program in any other directory you wish. Next, copy all WinClip files into that directory. Now, start the Windows Program Manager and click on the program group where you want to place the WinClip icon. Next, click on the File menu in Program Manager, then click on New. Click OK in the next dialog box, then type WinClip in the first line of the next dialog box. Press and type the whole path and filename for Winclip in the next line. (e.g.: C:\WINCLIP\WINCLIP.EXE). Click OK. The WinClip icon will appear in the program group which was current when you added the new icon. You may have to scroll the program group window to find the icon, but then you can drag it wherever you like. That's it. RUNNING WINCLIP =============== To start WinClip, just double-click on the WinClip icon. After a brief delay, you'll see the program's screen. Menu Commands ============= On the top line are three menu entries: File, Set Paint Program, and About. The File menu contains just one option: Exit. Click this command will exit WinClip, after asking for confirmation. The Delete Current File will delete the current file selected in the main file list. You'll have an opportunity to abort the process. Note that unless you are in the main file list, this option will be grayed-out. The Set Paint Program item opens a dialog box where you can input the file specifications for your favorite paint program. The default editor is Windows PaintBrush, which works very well for this purpose. If you choose, however, you may enter the file specification for another program, such as Publisher's Paintbrush from Zsoft. Your entry should include the complete path to the program. (e.g.: D:\PP\PPAINT.EXE). Substitute your own information. HINT: Use the Program Manager's File/Properties command to view the path information for your favorite paint program. The About menu offers registration information for WinClip. The WinClip Screen ================== Once you start WinClip, you'll see the program's main screen. On the left side are a group of boxes and buttons. You'll find a Drive box, a Directory box, a Filename box and a List box for selected files. To change drives, click the arrow next to the Drive box, then click on the drive where your .BMP files are stored. Select a directory or subdirectory by double-clicking on the appropriate directory in the Directory box. Your .BMP files will appear in the Filename Box, just to the right of the Directory box. You'll also see a count of the total number of files in that directory. Click once on any filename to view your image, which will appear to the right of the filename box. Just above the image, you'll see the image size, in pixels. Use the scroll bar to view files which are not immediately visible. NOTE: Images too large to display on the screen will be cropped at the edge of the WinClip window. At this point, you can print the current image by clicking on the [Print Image] button. Your image will print, along with the filename, in it's actual size for your printer. If you want to edit the image, click the [Edit Image] button. This will start either Windows PaintBrush or your choice of other paint programs. Your image will load automatically. HINT: Once you finish editing your image, save the changes and exit the paint program. Click on the filename again to view your changes on the WinClip screen. Printing Multiple Files ======================= Click the [Print All Files]] button to print all images in the Filename box. You'll see a confirmation box, then your files will print, with their filenames, on your laser printer. A 1.5" margin on the left of the page allows for three-hole punching for easy storage. The right margin may be as little as .25" PRINTING SPEED: If you print many images, printing may take as many as 5 minutes to complete. It takes time to compose the pages, and Windows just isn't a printing speed demon. Please be patient. As printing proceeds, you'll see each image appear, in order on the WinClip screen, along with the image's size. WinClip handles pagination, creating as many pages as needed to print all the files. Printing Selected Files ======================= If you want to print just some of your files, you can add them to the Selected files box. To add a file, click on its name in the Filename box, then click the [Add] button. Or you simply double-click on a filename in the Filename box. If you want to add all the files in the Filename box, click the [Add All] button. To remove a file from the Selected files box, click on the filename in the Selected files box, then click the [Remove] button. The [Remove All] button will remove all files displayed in the Selected files box. REMEMBER: Once you add files to the Selected files box, you can change directories to other directories containing .BMP files, then add those files as well to the Selected files box. This feature allows you to print files in more than one directory as part of your catalog. Directory names appear in the printout above the first file in a new directory. As with the Filename box, you can click on any filename to view the image on the screen. To print your complete list of selected images, just click the [Print Images Below] button. You'll be asked to confirm, then printing will begin. As before, you can cancel printing by pressing the [Cancel Print] button. To cancel printing, click the [Cancel Print] button which appears whenever you print multiple files. Printing will cease after the next image goes to the printer, but your printed pages will still emerge from the printer. OTHER WINDOWS PROGRAMS ====================== Fonter 4.1 This program allows you to view and print all your Windows 3.0 fonts. You can print font lists, with samples, or character set charts showing all the available characters for any font, with text samples. On-screen, you can view individual font samples or a full screen display of characters, with two zoom levels. You can even cut and paste from Fonter to other Windows software, making the job of choosing special characters a breeze. Fonter has the same requirements as WinClip, but works with PostScript printers too. Full ATM, FaceLift, and Publisher's Powerpak Support. REGISTRATION FEE: $15 AVAILABLE ON: Compuserve in WINADV as FNTER4.ZIP or on my BBS as FONTER.ZIP. MultiLabel 2.0 MultiLabel lets you create and print as many identical labels as you want on any standard Avery Laser Label sheets, using Windows 3.x and your HP LaserJet-compatible printer. Include Clip Art images, all your fonts and line, box, and circle elements. You can even include automatic serial numbers. REGISTRATION FEE: $15 AVAILABLE ON: CompuServe in WINADV as WINCLP.ZIP, or on my BBS as WINCLIP.ZIP. Rockford! 2.0 Rockford! is a program for designing business cards. Using a WYSIWYG display, it lets you create vertical or horizontal cards, complete with text in any font, clip art images, and line, circle and box drawing tools. Once you've designed a card, you can save it to disk, or print either a 200%-sized copy for your print shop or sheets of cards, ready-to-cut into instant business cards. If you ever need business cards, you need a copy of Rockford! Requirements are the same as WinClip. No PostScript support, but Rockford! works with ATM, FaceLift, or Publisher's PowerPak. REGISTRATION FEE: $15 AVAILABLE ON: CompuServe in WINADV as RKFRD.ZIP or on my BBS as ROCKFORD.ZIP.