----------------------------------------
  Computer Software For Cross Stitch
----------------------------------------

There are many commercial and shareware computer programs available to help
you create charts or inventory your supplies.  A list of those which have been
mentioned in rec.crafts.textiles is given below.  Check your favorite cross
stitch magazine for advertisements of commercial products.  These have the
most up-to-date information.

This list is for informational purposes only, and is not meant as a
recommendation. The suitability and/or reliability of these products for any
task is unknown (by me, at least).

Note that some of this information may be out of date or incomplete.  Please
notify me if you have any additions or corrections.


Finding the software:

   Commercial - Addresses are given for commercial products.

   Internet -   I chose not to list Internet archive locations for the
                shareware, as there are so many archives out there.  If you do
                not have a favorite archive where you do your
                freeware/shareware shopping, let me suggest ftp.wustl.edu or
                oak.oakland.edu.  Some of the programs listed below are
                available there.

   CompuServe - Library 5 of the Crafts Forum.

   Delphi     - Textile Arts Forum

   Fibernet -   See previous section for information on how to reach Fibernet.

   STCUG -      Seattle Textile Computer User's Group (STCUG).  STCUG has
                several disks for IBM and Mac ($4 each) and the FIBERbits
                newsletter ($18).  Contact them at P.O. Box 17506, Seattle,
                WA, 98107.


And finally, here is the list...


ColorKnit                                                               (Mac)
-----------
Type/Cost:       Shareware, $15
Version:
Where to Find:   Paul Duffy, 71 Oxford Street, Somerville MA  02143


   A color, grid-based program.  Even though this program is intended for
   knitting patterns, it can easily be adapted for counted cross stitch.


CompuStitch                                                          (PC DOS)
-----------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (CSTCGA.EXE, CSTVGA.EXE), Fibernet (CSTCGA.EXE,
                 CSTVGA.EXE), STCUG

   Design cross-stitch patterns.


Cross-Stitch Designer                                               (Windows)
---------------------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   R. Scott Horton, HobbyWare, 9686 Spruce Lane, Fishers, IN
                    46038
                 or
                 CompuServe, Fibernet (xstitc.zip)

   Quoted from a post by (?)...
      The Cross-Stitch Designer allows you to create and edit cross-stitch
      patterns.  The goal of this program is to display your pattern design
      using the computer so that you can see how the stitched pattern will
      appear before any stitching is done.

      Full, half, quarter, and outline stitches are supported by this program.
      Many of the standard thread colors are provided in a list from which you
      chose when creating a pattern.  Complete printing capability is
      provided.
      You can print a pattern using symbols for representing thread types and
      colors on a standard single-color printer, or print a pattern using
      stitches and actual colors on a color printer.

      All pattern editing is done using the mouse.  You use the mouse to
      select the type of stitch, the thread color, and the location of each
      stitch.  The mouse can also be used to select a region of a pattern
      which then can be moved to another location on the pattern, copied to
      the clipboard, or cut from the pattern.

      Cross-Stitch Designer also supports the conversion of Windows bitmaps
      into a pattern region.  This very powerful feature allows you to create
      patterns using existing graphics files.  These bitmaps can be created
      using graphics programs such as the Windows Paintbrush program or any
      program that can create Windows 3.0 bitmaps.

      Cross-Stitch Designer supports the VGA color palette.  These means that
      pure colors can be used for thread colors if your monitor cards supports
      the 256 color mode.


CrossMagic                                                           (PC DOS)
----------
Type/Cost:       Shareware, US$30
Version:         1.02 (version 2.00 due soon)
Where to Find:   CompuServe (XMAGIC.ZIP), Fibernet (XMAGIC.ZIP)

   Info from the author, Murray_Moffatt@kcbbs.gen.nz (Murray Moffatt)...

   CrossMagic...allows you to enter and maintain details on all your threads
   and charts.  It'll print reports on what threads you've run out of and need
   to buy again, which charts you can make with your existing stock of floss,
   what floss you need to buy to make a particular chart, it'll even let you
   enter a search text and will list all the charts you own that pertain to
   that subject. Evenweave conversion is catered for, and there is
   comprehensive on-line help for all options.

   A fully registered version of CrossMagic is available directly from the
   author at the following address:

        Model Systems
        P.O. Box 40-047
        Glenfield
        Auckland 1310
        NEW ZEALAND

   The registration is US$30.00, and includes the program, a professionally
   printed manual, postage and handling, and by special arrangement with two
   other shareware authors we have been granted permission to include two
   cross-stitch charting programs; GIFXTS for DOS, and Cross-Stitch Designer
   for Windows (these two additional programs are provided for you to evaluate
   and must be registered with their original authors if you decide to use
   them after the evaluation period).

   In addition to the above package, we have a library of charts that are
   compatible with Cross-Stitch Designer.  This collection of 222 charts (2.5
   megabytes worth) covers many different subjects.  The library is available
   for only US$20.00, or if you order CrossMagic at the same time then you can
   purchase the library for only US$10.00!

   When ordering, please specify either 3.5" or 5.25" diskettes.  Orders
   should either be in US dollars if sending a bank draft (your local bank can
   arrange this for you), or you may send US cash.  We are not able to accept
   cheques or credit cards (sorry!).  We can not be held responsible for any
   cash lost in the post, protect yourself and send a bank draft!

   If you are a CompuServe user then you may pay for CrossMagic via the CIS
   Shareware Registration Service.  Simply GO SWREG and follow the prompts.
   CrossMagic's registration ID is 1847.  The registration fee of US$30.00
   will be added to your next CIS account.  If paying by this option then
   please allow 90 days for delivery of your manual and software.

   An evaluation copy of CrossMagic is available for downloading from
   CompuServe in the CRAFTS forum (library 5, XMAGIC.ZIP) or directly from us
   for the price of US$6.00 (this is to cover the cost of the disk and postage
   and handling).  This version of the program is not crippled in any way,
   apart from a "please register me" message.  The evaluation copy does not
   include the manual, GIFXTS or Cross-Stitch Designer.

   If you have further inquiries, please direct them to:
           Internet:    Murray@kcbbs.gen.nz
           CompuServe:  Murray Moffatt [100240,1477]



DMC Database Management System                                       (PC DOS)
------------------------------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (DMC.ZIP), Fibernet (DMC.ZIP), STCUG

   Database for supplies and patterns.


DMC Inventory Program                                                (PC DOS)
---------------------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (DMCINV.ZIP), Fibernet (DMCINV.ZIP)

   Inventory DMC colors and supplies.


EasyGrapher, EasyGrapher Specialty , EasyGrapher Deluxe                  (PC)
-------------------------------------------------------
Type/Cost:       Commercial, cost unknown
Version:
Where to Find:   Easy Grapher, Davis Computer Services, Inc., P.O. Box 70175,
                    New Orleans, LA 70175.  800-231-3480, 504-899-9706
                 CompuServe (demos - EGDEMO.EXE, EGSZIP.EXE, EGDZIP.EXE)
                 STCUG (demos)

   Design needlework graphs. EasyGrapher Specialty is for Bargello, Hardanger
   and plastic canvas.  EasyGrapher Deluxe is for cross-stitch.

   Advertisement quoted below...
      It really is easy to chart with EasyGrapher. Tired of marking and
      erasing graph paper? Now there is an easy way to create your own
      needlework graphs. You can do it with EasyGrapher and an IBM PC
      compatible computer with the graphics or HP LaserJet printer. 39
      symbols--you choose which to use, all can be active at once. 2 full size
      (240x400 grid) blackboards to toggle between. Copy, rotate mirror image
      functions. Menu-driven, easy to use. Call or write: Easy Grapher, Davis
      Computer Services, Inc., P.O. Box 70175, New Orleans, LA 70175
      (504)899-9706.


GIFXTS                                                               (PC DOS)
------
Type/Cost:       Shareware, $25.00
Version:         4.3
Where to Find:   Chris O'Donnell (chrisod@delphi.com)
                    576 Benson Road, Middlebury, Ct 06762
                 CompuServe (GIFXTS*.ZIP), Fibernet (gifxts*.zip), STCUG
                 (On Internet look for gifxts43.exe and gifxts43.txt)

   Converts GIF files into cross-stitch patterns. It can handle images up to
   640x480 pixels.

   According to Chris, version 5 is under development.  For those who have no
   other way to acquire the software, she will send a copy by mail for a $5.00
   handling fee.

   In a 1993 message, Chris wrote...
      I offer to all registered users a disk containing major upgrades for a
      $5.00 handling fee (postage and disk purchase). I am now extending that
      offer to anyone who has no other way to get the program. My address is
      576 Benson Road Middlebury Ct. 06762. Send a check and specify disk size
      (I have a 5.25 high density at home, my husband has a 3.5 high density
      at work) ...
      Phone support is available for any user, registered or not. My # is in
      the documentation.


Needlework                                                        (Macintosh)
----------
Type/Cost:       Shareware, $20
Version:
Where to Find:   EduCorp catalog - 800-843-9497

   From a 1993 posting by vlb@Apple.COM (Vicki Brown)...
      There is a shareware program called Needlework, for the Macintosh.  The
      graphing area is 90x90 with a choice of 28 symbols.  Each symbol can
      have a color attached, to be printed as a key.  You can also draw lines
      for backstitching and enter instructions.  The version I have (2.2)
      won't read in an existing picture and chart it, and it is b&w only.
      Maybe the author will improve it.  If you send the author $20 you'll get
      the newest version personalized for you.


PC Stitch                                                            (PC DOS)
---------
Type/Cost:       Commercial, $45
Version:
Where to Find:   M & R Enterprises, P.O. Box 9403, Wright Bros. Branch, Dayton
                    OH 45409.  800-800-8517
                 CompuServe (demos - XSCGA.EXE, XSEGA.EXE, XSHERC.EXE),
                 Fibernet (demos - XSDEMO.EXE), STCUG (demos)

   Advertisement quoted below...
      Create your own needlecraft patterns with PC Stitch. This easy to use
      program allows you to design your own cross stitch, needlepoint and
      other types of needlecraft patterns. Create graphs as large as 200x140
      stitches in up to 16 colors or symbols. Other features include: saving
      patterns for later use, mirror imaging and painting, moving designs
      within the pattern, automatic pattern centering, generating printed
      copies of designs. Due to a large number of requests, PC Stitch now
      supports EGA/VGA, CGA and Hercules displays...

      Requires an IBM compatible with 256K of memory and one of the above
      mentioned displays. Will work with any printer and can be distributed on
      either 5 1/4 or 3 1/2 inch disk. 16 colors only on EGA/VGA displays.


Stitch Crafts                                                     (Macintosh)
Stitch Grapher                                             (IBM PC, Apple II)
--------------
Type/Cost:       Commercial, $150 (Mac), $90 (PC)
Version:
Where to Find:   Compucrafts, P.O. Box 326, Lincoln Center, MA 01773
                    508-263-8007

   Design needlecraft charts.  "Change symbols, copy, rotate, choose from 360
   color DMC palette, up to 50 symbols (Mac) or 30 symbols (PC)."  Create
   charts and legends from color pictures.


Stitch-It II                                          (PC Windows, Macintosh)
------------
Type/Cost:       Commercial, cost unknown
Version:
Where to Find:   Sheridan Software, address unknown
                 Fibernet (demos - stitchit.cpt (Mac), stitchit.zip (Windows))

   The PC version requires Windows 3.0 or 3.1.


Stitch Painter                                (Macintosh, IBM Windows, Amiga)
--------------
Type/Cost:       Commercial, $165
Version:
Where to Find:   Cochenille Design Studio, P.O. Box 4276, Encinitas, CA 92023

   Design cross stitch and knits. Demo disk available.


STITCHERY                                                             (Amiga)
---------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (STITCH.LZH), Fibernet (STITCH.LZH)

   Converts an IFF file into color coded diagrams. May be used for cross
   stitch, needlepoint, knitting...


XSGIF                                                                (PC DOS)
-----
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (demo - XGDEMO.EXE), Fibernet (demo - XGZIP.EXE)

   Convert GIF files to "XStitch" patterns.  Must be a registered user of
   "XStitch" to get a working version of this program.


XStitch                                                              (PC DOS)
-------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   CompuServe (XSZIP.EXE), Fibernet (XSZIP.EXE), STCUG

   Design cross-stitch patterns.


X_STITCH                                                             (PC DOS)
--------
Type/Cost:       Shareware, cost unknown
Version:
Where to Find:   Fibernet (XSTITCH.ZIP)

   Design cross-stitch patterns.

