5-6-94                            DosFax

     If  you  have  an AFC,AFX,Pkt(2400) or 14.4 RPI  faxmodem  then  pick
Class-1 fax in DosFax.

     Dosfax  is used much like a printer driver. You load FAXCOM then  load
FAXCAP  (they both can also be put at the end of your Autoexec.bat to  load
when youu boot) and then go to whatever software you want to create the fax
in.  A  word  processor or even a paint program.  Before  you  'print'  the
created document, you select either an Epson FX85 (FX80, RX80) driver or  a
HP  Laser  IIP in that application. It can only fax fonts you SEND  TO  the
printer  (like Dos TrueType). It cannot FAX Epson or HP fonts! It will  try
to  approximate  those fonts, but they will not fax the same  as  they  are
printed.  Then  use the HOT-KEYS (see p.3-4 3-5 in the  DosFax  manual)  to
capture,  then Print  in your application and Dosfax will capture it.  Then
you get a window and then FAX the document.      See chapter 3 for complete
info.

     If  Dosfax does not have your EXACT printer listed, then a rec'vd  fax
may  print  with spaces, lines or other irregularities.  Rec'vd  faxes  are
graphics, so Dosfax prints to your printer in graphic mode, not text.

     If  you  have  trouble with CAPTURE, with sending a  fax  or  computer
locking, it's probably another TSR or device driver. Try 'REM' them in your
config.sys / autoexec.bat files. Also, DOS-fax is what it is, not Windows.

                                        Don Hinds - Zoom Tech
##include=c:\text\signa.tif



