03/05/94
--------
 Added - You can now use ALT-A in the Auto Dialer Screen to ADD a BBS.
 Added - The program will also create the PROEXEC one by default.
         However, I haven't added the necessary code to make all of the
         proper files for the PROEXEC.
 Added - When using the Dialer portion of the program, it will update
         the line status to indicate what exactly is being done.
 Added - You can now press the SPACE bar to CYCLE while trying to log
         onto a BBS.
 Fixed - The program will no longer ABORT if the BBS you're calling
         keeps getting RING singals.  Instead, it will cycle to the
         next BBS number (if there).

03/04/94
--------
 REMOVED - The internal editor is GONE <sigh>.  The program is getting
           too big <sigh>.  This means that you need to use an external
           editor.  We will be supplying one.  By doing this, it will
           allow us to add a SpellChecker into our editor in a future
           version.
 REMOVED - The ScrollBack Buffer is GONE.  Since there is no internal
           editor, no sense in wasting memory for something that isn't
           being used.

03/03/94
--------
 Added - You adding a file attachment, you can now press ALT-F.  This
         will pop up a window so you can enter in a file spec for a
         specific file.  So if you wanted to attach a certain file
         and didn't know the EXACT path/filename, you could enter
         something like F:\QMODEM\*.ZIP.  You could then search through
         your various directories for the file that you want to attach
         to a message.
 Added - When attaching a file, it's possible that you THINK you know
         the correct filename path.  Well, if you happen to enter in an
         incorrect filename, you will not be able to save the message.
         The prompt will go to the File Attachment line and let you
         enter in a different filename (or just use the ALT-F).
 Added - You can now PICK your conference when entering/replying to a
         message (in case you don't know the conference number off the
         top of your head).  Simply press the F3 key.

03/02/94
--------
 Fixed - When editing a reply, the SIGNATURE file will not be added to
         the message (since it already exists).
 Added - Each conference can now have its own SIGNATURE file.
 Added - You will now be prompted with a "Do you want to abort this
         message (Y/[N])" prompt if you press the ESC key while editing
         the header portion of the message.
 Changed - When entering a new message, the TO and SUBJECT fields are
           left EMPTY.

03/01/94
--------
 Fixed - When saving a message, the cursor wasn't being displayed.
 Added - If you're running under DV, you can use the CTRL-O key to
         quote the message you're replying to.

02/07/93
--------
 Added - Have added MEMCHECK and CHEAP libraries to the code. What this
         means is that if a BUG appears, it will be reported to you and
         will be created in a file called "MEMCHECK.LOG".

         You will also need to have the MEMCHECK.CFG file in your
         CAMSTER directory and also set an environment as follows in
         your AUTOEXEC.BAT file:

              SET MEMCHECK=ON

         This will enable the debugging code to go into affect.  The
         program will run a little slower, but it will help us in
         finding any bugs.

         Please check your MEMCHECK.LOG file each time you use Camster.
         I am going to modify the code so it calls in the internal LIST
         function upon exiting the program.  That way you can see if
         any debug info is available.  If it is, please let us know
         ASAP.

 Fixed - If your PATH to your work directory was longer than 25
         characters, then most likely the file attachment ability would
         not work correctly.

12/13/93
--------
 Fixed - Other changes were made, but I forgot to add them to this
         file.  Sorry!!
 Fixed - There was a problem with using the external.  It would create
         musical notes sometimes.  I've been unable to duplicate it
         at this point, so I'm hoping it is fixed.
 Fixed - The AnsiTerm emulator wasn't working properly when viewing
         messages, news, newfiles, or bulletins when it was told to
         change the background color.
 Fixed - If trying to access the "Files" menu from within a QWK packet
         and the file didn't exist, you were prompted with a
         "AnisTerm Error #2".  I've fixed it so it doesn't display this
         error message.
 Fixed - When adding/dropping a conference, the name of the TO field
         was being changed to the person of the last message you read.
 Fixed - The Help Information line for the "Directories" was spelled
         incorrectly.
 Fixed - When editing a reply, the TO field was being changed to the
         FROM field.  I thought I fixed it in the Beta I released, but
         it only fixed it if you were using an EXTERNAL editor.  The
         internal editor still had a problem.

 Fixed - When dialing a bbs via the command line and using the /REP
         option, it wouldn't upload the REP packet if the name of
         the REP packet ID was less than 8 characters.  Example, if the
         reader was trying to upload PROEXEC.REP, it wouldn't because
         PROEXEC is only 7 characters.  However, if YOURMAIL.REP was
         going to be uploaded, it would work just fine.

11/04/93 BETA H release
-----------------------
 Fixed - When REPLYING to a message with an external editor, it didn't
         work.  Broke it when I reduce the file access (as a file was
         missing).
 Fixed - Editing a REPLY with an external editor was broken.
 Fixed - When editing a reply, the TAGLINE wasn't removed.
 Fixed - My screen management routines weren't working properly and
         could still cause RANDOM problems to happen.  I finally found
         the problem and fixed the code.
 Opps  - Forgot to add the updated CAMSTER.HDX (help file) to the Beta
         G release.

11/01/93 BETA G release
-----------------------
Changed/Fixed/Added
  There were probably some other changes that we made, but not all of
  them got added to this file.  We're hoping to have Camster release
  by the end of November (if not sooner).

 Changed - The look of viewing messages is now different.  There's now
           only one line at the bottom of the screen, and we have made
           the HEADER portion of the message Dynamic.  This means that
           if you read a message that doesn't contain any PCB Long
           header Types, you'll have more viewing pleasure per screen.
 Added - There's now a Header Spacer that you can disable.  What this
         means is that if you want more viewing per message, you should
         disable this.  This will give you one extra line, but doesn't
         look as pretty <g>.
 Changed - When reading messages in a conference, the program no longer
           writes the message to disk.  We've had a lot of people
           comment about this.  We've changed it so it no longer does
           this.
 Fixed - When using the internal editor, the Quote portion wasn't
         working properly.  It was always using "=>" as the Quote
         character.  It'll now work however you've defined it in
         the setup portion of the program.
 Added - Event running of the Dial Portion.  This means you can use
         Camster to call a BBS during your EVENT to upload your REP
         packet and download a QWK packet.  See the CAMSTER.DOC file
         on how to use (it's at the very end).
 Added - When replying to a message, and if you're in a PostLink type
         conference, it will copy the Routed Number into the Header
         portion of the message.  Also, if the message is private, it
         automatically sets the routed and private mail information
         properly.  There have been too many times when I have left a
         private message to someone in RIME and have forgot to add the
         the Routed Information or vice versa <arg>..
 Fixed - When saving a message, the ALT-S (Save Message) didn't work
         properly.
 Changed - When viewing messages in the previous releases, I hard coded
           two Help Lines and I believe around 7 Header Messages. I
           have changed it so there is only one help line (which now
           displays the current BBS info) and so that the header
           portion is dynamic.
 Added - You can now have the option of having a BLANK LINE spacer
         inbetween the header and the actual contents of the message.
 Added - You can now set the Right Margin on the internal editor.  The
         minimum length is 40, maximum is 79.
 Added - You can now set the Tab Length size.  Minimum is 2, maximum is
         15.
 Fixed - If using the CTRL-RightArrow/LeftArrow, as soon as you got to
         the last word for that movement, it would either go to the end
         or beginning of the screen.  I've fixed it so it stays at the
         end/begin of each word (depending on which key you're using).
 Added - ALT-N will take you to the Configuration Screen from anywhere
         in the program.
 Added - F5 will shell to DOS from anywhere in the program.
 Fixed - If you added a backslash to the WORK directory, the program
         wouldn't run properly.  Matter of fact, it wouldn't let you
         into the Select QWK option.
 Fixed - The READ and REPLY Status flags in the PERSONAL and the
         first conference to have any messages were being shared by
         each other.  This is incorrect. What would happen is that
         the READ/REPLY flags could be set on a message that you hadn't
         READ or/and REPLIED to.
 Fixed - There was a problem in my ANSI driver routine.  It was
         basically corrupting memory <arg>.
 Fixed - In the main configuration area, Directories, ATTACHMENT was
         spelled incorrectly.
 Fixed - If a .QWK packet didn't have any .NDX files, the program would
         work fine the first time with PERSONAL messages in the
         conference.  However, if you quit that packet and then opened
         another .QWK packet (that didn't have any .NDX files), the
         program would indicate that you didn't have any PERSONAL
         messages, when in fact you did.
 Fixed - The internal editor is now 400 lines maximum.
 Fixed - If you were using the external editor, it would fill the end
         of the message with NULL's.  This was incorrect.  It should of
         been SPACE's.
 Added - You can now create a VERBOSE LOG file. The NORMAL log file
         hasn't fully been implemented, but will be before the next
         wide area beta.
 Added - Have added an option to Disable the Serial I/O when writing
         to a disk.  You should only use this option if you have a
         high speed modem and you don't have a 16550AFN Chip, or you
         are downloading files to a FLOPPY Disk.
 Added - Have added an option for the Western Digital 16550 Chip.  The
         WD 16550 chip has some problems.  If you have this UART chip,
         and run into problems with the the communication routines
         (especially Zmodem), turn this on.


 Fixed - The "Disable CTS/RTS" wasn't enabled properly.

 Fixed - If you were manually trying to download a file and the auto
         Zmodem started, it would put the file(s) in the current
         directory.  It'll now put it in the proper path.

 Fixed - If your path to your QWK/REP was not the same, the renaming
         of the QWK packets wasn't working.  This is because I was
         trying to rename a QWK file in the REP directory <arg>.

         This also caused problems if a QWK file already existed, as
         Zmodem would APPEND to the current QWK packet, thus making it
         completed unusable.  I've changed the code now so that if this
         does happen in the future, the QWK packet will be overwritten.

09/13/93
--------
 Fixed - The ATDT was being forced and wasn't using the dial string
         defined by the user.
 Fixed - COM1 and COM3 were not working.  This was due to not using the
         correct variable <arg>.
 Fixed - If your modem didn't have echo on, the display wasn't being
         updated properly (the "Phone: " portion).

         There was something else, but I can't remember now <arg>.

09/03/93
--------
 Fixed - The uploading of a REP packet wasn't working right.  The
         program was sending two U<cr> strings, which for some reason
         caused the program to not send the file.
 Fixed - The CAM-MAIL.PPF file was setup incorrectly.  When I made
         changes to the .PFF files yesterday, I made a typo on the
         CAM-MAIL.PFF file.

09/02/93
--------
 Fixed - The modem initialization string wasn't being sent properly.
 Fixed - The program was sending sometimes sending an N when getting to
         the Main Board Prompt in a PCBoard Configuration.  I believe I
         have fixed this problem.

         The above fix was due to the PROMPT file being setup wrong.
         The proble was with the MORE? and (H)ELP prompts.  I changed
         them so they look like this:

            More   -  (H)ELP, MORE?
            Help   -  (H)ELP?

         Make sure that your PRESS (ENTER) prompt does NOT contain a N
         for the action.  It shouldn't be sending an N character.

 Fixed - When using the Prompt Editor, it would sometimes keep
         switching between Yes/No prompts <arg>..  Not good!
 Fixed - I wasn't closing a file when first initializing the reader.
         This would eventually cause an out of memory problem.
 Fixed - Sometimes my Keyboard buffer wasn't being empty.  This would
         cause certain areas of the program to not work properly.
         Normally this condition could be found when pressing the ESC
         key.  What would happen is that after you hit the <enter> key,
         and you would try to access another menu and press <enter>,
         the program would think you pressed something else and nothing
         would work <g>...

         I also noticed something with the QMAIL door on Salt Air.  A
         lot of their prompts are colorized in several places.  What
         this means is that the actual prompt isn't what the program
         expects.  Make sure you give a N;Q;NS on the Graphics question
         to avoid these problems (I haven't wrote an ANSI filter at
         time when looking for prompts, but plan to in the future to
         avoid this problem.

08/08/93 - 09/02/93
-------------------
 Quite a few things were added and things were fixed as well.  I spent
 two or three weeks alone testing the communication routines (making
 sure that they worked properly).  If you run into any problems with
 the communcation or automation of loggin into a BBS, please let me
 know ASAP!!

 INTERNAL EDITOR LIMITED -  Due to the size of the program at this
                            point and all of the text being in near
                            memory, you will only have about 80 lines
                            when replying to a message, but will have
                            the full 150 lines when entering a message.
                            If you need more than 80 lines for a reply,
                            you'll need to use an external editor.
                            Hopefully in Beta E I will convert all of
                            near memory text into FAR memory to free
                            up quite a bit of room.  This will also
                            allow you to customize some of the prompts.

 Added - File attachment Directory, Download Directory, and a
         Upload Directory!  These are used when manually trying to
         upload/download files or when a QWK packet contains a PCBoard
         file attachment (will be adding WildCat's in the next
         release).
 Added - A message will now indicate that it has a REPLY if you reply
         to a message.  I would suggest that you delete your BOOKMARK.*
         files since the file format had to be changed to include this.
 Added - You can now type the first letter of the Select Menu Screen to
         execute the option (Qwk Config, Auto Caller, etc..).
 Added - When using the internal QUOTE REPLY function and if you were
         using a mouse, the NORMAL CURSOR was not displayed.  I've
         changed the code so that the CURSOR is displayed if a mouse is
         being used.  This means that if you are using a MOUSE, you
         will have two cursors.  The mouse cursor and the normal
         cursor.
 Added - Pressing ALT-D in the Select Packet Menu will DELETE the
         Highlighted Packet.  Be sure as there is no YES/NO prompt.
 Added - When entering the SUBJECT/TO field, and these are blank and
         you try to save the message, you will be put back into the
         header portion of the message and will need to make sure they
         aren't blank (which one of them must be <g>).

 Fixed - When using the EDIT REPLY function and if you were using an
         external editor, you would be forced into using the Internal
         editor instead.
 Fixed - When Adding/Droping a conference, I wasn't closing a file.
         This would eventually cause an out of memory error and finally
         no file handles left <g>.  This would only happen if you tried
         to add/drop about 10 conferences.  Otherwise, you would of
         never of seen it.  Hopefully it'll fix the problem some people
         have mentioned about the Adding/Droping not working properly.
 Fixed - If you enter a message for a QWK packet and there previously
         wasn't a REP packet, the Yes/No option in the Packet Menu
         wasn't being updated.
 Fixed - If you went into the Bulletin Menu, the temporary bulletin
         file wasn't being deleted, causing the prompt about your work
         directory not being empty to be displayed.
 Fixed - Request Return Receipt was spelled incorrectly.
 Fixed - There were several places where ALT- was spelled ATL- <arg>.
 Fixed - ALT-S wasn't working when trying to Save a Message.  It was
         doing something else <arg>.

07/28/93
--------

 Added - Enable Taglines has been changed from a YES/NO option to:

             Yes/Pick/Random/Sticky

         The code has also been modified so that if you have a
         conference with its own tagline file, that conference will
         have its own set of pointers to keep track of what the last
         tagline selected.

         Also, if you have enabled Pick, it will automatically go into
         the tagline manager.

         Please note, if you are using a third party program to use
         taglines, please DISABLE taglines in the reader so you won't
         get duplicate taglines.  In order to use a third party program
         to manage your taglines, you need to specify that you are
         using an external editor.  Instead of calling your editor
         directly from the reader, you will need to use a BATCH file to
         call your EDITOR and your TAGLINE manager.

 Fixed - The Packet Screen was not being updated after reading a QWK
         packet.

 Fixed - I added code to keep track of messages in a conference, but
         never fully implemented it.  If you read a conference and
         decide you want to quit that conference, and then later
         rejoin that conference, it will take you back to where you
         left off.

         This acts as what most people know as a BOOKMARK. The bookmark
         will automatically be saved and be read in if you decide to
         start reading this packet.  That way you don't lose your
         place.

 Fixed - When using the STATS command to display your BBS Information,
         the USERS FULL NAME was being displayed twice (opps).

 Enhanced - When using the internal scrollback buffer with the MOUSE
            enabled, the mouse release key was too fast.  This could
            cause text to be tagged and untagged very easily.

            I also modified it so if you press the RIGHT button mouse,
            it will act as if ESC was pressed (this is how it should
            act anyways).  This was causing people to go insane <g> due
            to them tagging text and then hitting the right button and
            nothing would happen.

 Enhanced - When using the LIST Messages function, it will now take you
            to the exact message that you were currently reading.  That
            way you won't lose your place when you're reading a
            conference that has a LOT of messages.

 Changed - I made a new TAGLINE.TGS file.  It contains only about 300
           taglines and I believe it doesn't contain anything that
           might be offensive.  If there is, please let me know.

 Fixed - When using the internal editor, it wasn't very clear on how to
         QUOTE part of a message.  In order to quote part of a message,
         simply hit the SCROLL LOCK key.

 Fixed - The HELP file didn't contain any information on how to import
         a text file into the internal editor.  You use the ALT-I key
         to import a text file.

 Fixed - If replying to a message and using the external spell checker,
         and you wanted to spell check your reply message, it wouldn't
         do it.

 Added - You can now have a Signature file.  You define the file in the
         QWK Configuration, Messages/Editors Options.

 Fixed - If you tried to use the Bulletin Option when reading a packet,
         and you didn't have any bulletins, a file would be created and
         was left open (meaning it couldn't be deleted).

 Added - You will now be prompted to delete a REP packet if it is older
         than the QWK packet you are going to read.

07/27/93
--------

 Added - For each conference you can now define whether or not you want
         the LIST function to be displayed before reading messages in a
         conference.  Basically, this means that you can see the TO,
         FROM, SUBJECT, and NUMBER header fields before you actually
         start reading messages.  This allows you to select where you
         want to start reading in a specific conference.

         In order to enable this, you need to use the ALT-C option in
         the Conference Screen (where all of the conferences are
         displayed).  This allows you to specify which conferences you
         want this option to be enabled with.

 Added - When using the Conf/Message/List option (insert key when
         reading messages), it will now display a  if a message has
         been read.

07/23/93

 Fixed - The BBS Name in the Qwk Packet Selection Area wasn't being
         displayed.
 Fixed - The Read (Yes/No) wasn't enabled.  It will now display
         whether or not you've read this QWK Packet.  The TERM READ in
         this case means whether or not you have looked at this packet.

         Probably in the future I'll change it to work according to
         how much of the packet has been read, but currently, it's
         either YES or NO (sorry folks).
 Fixed - The HEADER portion of entering/replying to a message had no
         HELP.
 Fixed - The TagLine manager was pointing to the WRONG HELP files.
 Fixed - If you turned off (Beep On Personal Messages), the program
         would still beep on personal messages.
 Fixed - There was a small problem with animating an ANSI message with
         ANSI MUSIC.  This is a very TRICKY area because not all people
         follow the standards, so you have to try and make up the parts
         they don't add <arg>.  At any rate, hopefully this will do the
         job a little better.
 Fixed - When editing the HEADER of a message (TO,FROM,SUBJ,etc) the
         <enter> key would only move between the TO,FROM, SUBJ fields.
         You can now also use the <enter> key to scroll down to the
         Private/ConfNumber/CarbonCopy/RequestRR/TagLines.
 Fixed - The EDIT REPLY options was not working(PERIOD).

 Added - You can now KILL a reply.  Please note that if you KILL all of
         your reply messages AND if you previously had a REP packet,
         the REP packet will not be deleted.  This is done for SAFETY
         reasons.
 Added - You can now use the Right/Left arrow keys to go to the
         next/previous message.
 Added - You can now specify up to four Tagline Quote characters. Also,
         if you use the %N% in this option, please note that it
         defaults to the Users Initials and adds a '>' character.
         However, if you wish to bypass the '>' characters when using
         the %N% parameter, simply add the character of your choice.
         Examples:

              %N%    Looks like -  CD> Hello there
              %N%?   Looks like -  CD? Hello there
              %N%   Looks like -  CD Hello there

 Added - Updated the CAMSTER.HDX file to reflect the new additions.
