
INSTALL INSTRUCTIONS for the NetWare Client v2.1 for OS/2


The NetWare Client v2.1 for OS/2 consists of 5 self-extracting
files: 
WSOS21.EXE contains the installation program
WSOS22.EXE contains the requester and RIPL files
WSDRV1.EXE contains the LAN drivers
OS2UT1.EXE contains LOGIN, NLIST, MAP, CX, SYSCON utilities
OS2DC1.EXE contains the electronic documentation in OS/2 IPF
format

Once these files are downloaded, there are 3 methods that can be
used to complete the installation of the NetWare Client v2.1 for
OS/2:

Method 1: Extract to Network Drive/Install FromNetwork Drive
Method 2: Extract to Hard Drive/Make Diskettes/Install From
Diskettes
Method 3: Extract to Diskettes/Install From Diskettes

Instructions for each method follow. 


*********
Method 1: Extract to Network Drive/Install FromNetwork Drive

NOTE: You must have a version of the Netware Client already
installed on your workstation and be connected to the Network in
order to use this install method.  You cannot install to and from
the same drive. Example: You cannot install from C: to C:

1.  To install the NetWare Client to your hard disk, you must
    have adequate disk space to allow for the client to install.
    (about 4 meg)

2.  At the Network drive, create a directory called TEMP.  This
    directory can be deleted later. 
          
    Example:  At the J:\ prompt, type

                    MD TEMP   

3.  Extract WSOS21.EXE, WSOS22.EXE, WSDRV1.EXE, OS2UT1.EXE, and 
    OS2DC1.EXE into the TEMP directory. The self extracting file  
    will automatically create the required subdirectories.      
    Change to the directory where WSOS21.EXE, WSOS22.EXE,       
    WSDRV1.EXE, OS2UT1.EXE, and OS2DC1.EXE reside.  DO NOT change 
    to the TEMP directory.

    Example:  At the command line, type
                    
                    WSOS21 J:\TEMP\

    Do this for each self extracting file in turn.  This will     
    extract all the files into the TEMP subdirectory.

                                        
4.  In an OS/2 Command Line Session, CD into the TEMP directory 
    and type INSTALL.  The NetWare Client for OS/2 Installation 
    screen will appear. Follow the instructions that appear on  
    the screen to install the NetWare Requester on the          
    workstation. NOTE: Make sure and place the local disk drive   
    letter as the target directory.

5.  Delete your TEMP directory if desired.  


********************
Method 2: Extract to Diskettes/Install From Diskettes

1.  Format 5 3.5" high density double-sided diskettes.

2.  Label each diskette with the following names: 
      Disk 1    WSOS2_1
      Disk 2    WSOS2_2
      Disk 3    WSDRV_1
      Disk 4    OS2UTIL_1
      Disk 5    OS2DOC_1

    Example:  At the command line, type
     
                    Label A: WSOS2_1

2.  Extract the .EXE files to their corresponding diskettes.  The 
    correct directory structure will be created automatically on 
    the diskettes. Self-extract WSOS21.EXE onto WSOS2_1,        
    WSOS22.EXE onto WSOS2_2,etc.

    Example:  At the command line, type

                    WSOS21 A:

3.  After creating the 5 diskettes, insert the disk labeled       
    WSOS2_1 diskette in drive A.

4.  Open the drive A: icon on your desktop and open the           
   INSTALL.EXE program. The NetWare Client for OS/2 install       
   screen appears. 

5.  Follow the instructions on the screen or in the manual to     
    complete the install.


******************
Method 3: Extract to Hard Drive/Make Diskettes/Install From
Diskettes

1.  Create the following subdirectories on your hard disk:
    WSOS2_1, WSOS2_2, and WSDRV_1, OS2UT_1, and OS2DC_1
     
    Example:  At the C:\ prompt, type

                    MD WSOS2_1

2.  Extract the .EXE files into their corresponding
    subdirectories, the correct directory sructure will be        
    created in each subdirectory.  WSOS21.EXE into WSOS2_1,
    WSOS22.EXE into WSOS2_2, etc.

    Example:  At the command line, type

                    WSOS21 C:\WSOS2_1\

3.  Format 5 3.5" high density double-sided diskettes.

4.  Label each diskette with the following names: 
      Disk 1    WSOS2_1
      Disk 2    WSOS2_2
      Disk 3    WSDRV_1
      Disk 4    OS2UTIL_1
      Disk 5    OS2DOC_1

    Example:  At the command line, type
     
                    Label A: WSOS2_1

5.  Insert diskette labelled WSOS2_1 into drive A:.

6.  Change directory to WSOS2_1 on your hard disk.

7.  Type the following at the command line:

                    XCOPY *.* /S /E /V A:

8.  Repeat steps 6 and 7 for the remaining 4 diskettes. Ensure    
    that the files are copied from the correct directory to the   
    corresponding labelled diskettes.

9.  After creating the 5 diskettes, insert WSOS2_1 diskette in    
    drive A.

10. Open the drive A: icon on your desktop and open the           
    INSTALL.EXE program. The NetWare Client for OS/2 install      
    screen appears. 

11. Follow the instructions on the screen or in the manual to     
    complete the install.
