DiskSweep for Windows version 1.0
Elite High Technology, Inc.
Copyright (c) 1993, All Rights Reserved

Compression software --
LHA version 2.13 Copyright (c) Haruyaso Yoshizaki, 1988-91

DiskSweep for Windows is distributed in a self-extracting format
as follows:

NOTE:   This version of the archive does includes the Visual Basic
	runtime, VBRUN200.DLL from Microsoft.  If your system 
	already has this file, you can download DSWNVB1.EXE which 
	does not contain it and is a little smaller.

DSWVB1.EXE  -- A self extracting compressed archive file.
	
	Contents:
	README.1ST   -- Instructions for building the setup files.
	DSWVB2.EXE   -- Self extracting archive containing program 
			setup files.

Instructions:

	By now, you should already have extracted the DSWVB1.EXE
	archive into the files README.1ST (this file) and DSWVB2.EXE.

	DSWVB2.EXE is another archive containing the equivalent 
	of a Windows setup floppy.  We suggest you decompress this 
	file in either a separate installation directory or onto a 
	blank formatted floppy.  To extract the setup files from 
	DSWVB2.EXE, type DSWVB2 at the DOS prompt.

	For example:
	1. Create a directory \dswinst and put DSWVB2.EXE in it.
		>md \dswinst
		>copy DSWVB2.EXE \dswinst\DSWVB2.EXE
	2. Execute DSWVB2 at the DOS prompt.
		>DSWVB2

	Once you have done this, start Windows and then 
	run SETUP.EXE from the installation directory or 
	the floppy, depending on where you extracted the files.  
	From Windows, in the Program Manager, run the SETUP.EXE 
	program on the installation floppy.  To do this pull down 
	the File menu and select Run from that menu.  In the
	dialog box, fill in A:SETUP or B:SETUP, depending on which 
	drive the floppy is inserted into.

	<<<<<<<<<<<<<<<<<<< Compatibility >>>>>>>>>>>>>>>>>>>

	PCTools' DiskFix program is incompatible with DiskSweep.  
	DiskFix will mistakenly detect corrupted directory structures
	and ERASE the entire hard disk.  Do not run DiskFix with 
	DiskSweep installed.

	On some machines, the use of FASTOPEN will cause Windows to
	freeze when DiskSweep is also running.  If you see this
	happening, stop using FASTOPEN.  

	When copying files via Laplink, we suggest disabling the TSR,
	DSWTSR.EXE as we have seen periodic timeouts in the data
	transfer phase of Laplink.  The TSR can be disabled by simply
	REM'ing it out of AUTOEXEC.BAT, or booting the PC clean from
	FLOPPY when doing a Laplink type transfer.

	There are no other known incompatibilities at this time.

Contents of DSWVB2.EXE:

	DSWCLEAN EX_      6839 07-14-93   4:18p
	DSWEEP   EX_    136259 09-16-93  12:15p
	DSWEEP   HL_     30490 09-01-93   3:47p
	DSWEEP   VB_     12563 09-01-93   3:29p
	DSWKERN  DL_      4197 07-14-93   3:53p
	DSWTSR   EX_     32397 09-09-93   3:34p
	REGISTER HL_      5802 09-01-93   3:47p
	SETUP    EXE     14848 10-21-92  12:00a
	SETUP    LST        40 10-21-92  12:00a
	SETUP1   EX_     25673 09-03-93   4:58p
	SETUPKIT DL_      3657 10-21-92  12:00a
	THREED   VB_     31220 10-21-92  12:00a
	VBRUN200 DL_    246403 10-21-92  12:00a
	VER      DL_      8736 02-21-93   8:45a

