&l66P(10U(sp10h12vsb3t&a-360V&l0C&a+255V&a+255V&l0C&a+210V
&k126H  &k54H &k12HDeskJet Envelope Printer Accessory&l0C&a+120V
&k126H  &k60H &k12HCopyright 1990 by Fred T. Dunaway&a+120V&k126H&k60H&k12HAll Rights Reserved&a+120V&a+120V
&k120H (s3B&d2D&k12HLegal Stuff(s0B    &d@&a+120V&a+120V&k120H&k12HThis documentation and the DeskJet Envelope Printer&a+120V
&k120H &k12HAccessory are Copyright 1990 by Fred T. Dunaway, All Rights&a+120V
&k120H &k12HReserved.  Fred T. Dunaway makes no warranty of any kind with&a+120V
&k120H &k12Hrespect to this accessory or documentation.  The user assumes all&a+120V
&k120H &k12Hresponsibility for any damages resulting from the use of this&a+120V
&k120H &k12Haccessory and documentation.&a+120V
&k126H &k54H &k12HENVPRINT.ACC may be distributed freely provided this&a+120V
&k120H &k12Hdocumentation with the copyright notice is included. &a+120V
&k120H &k12HENVPRINT.ACC and this documentation are Freeware and may not be&a+120V
&k120H &k12Hsold or included with any commercial program without the written&a+120V
&k120H &k12Hpermission of the author.&a+120V&a+120V&k36H &d2D(s3B&k12HWarning!!&d@(s0B&a+120V&a+120V
&k126H &k12H ->Do NOT unplug or plug in a printer to the ST while the ST is&a+120V
&k126H  &k42H &k12Hon.  You will damage the computer!<-&a+120V&a+120V
&k120H (s3B&d2D&k12HWhat is it?(s0B    &d@&a+120V&a+120V&k120H&k12HDeskJet Envelope Printer Accessory (DJEPA) is just what the&a+120V
&k120H &k12Hname implies; a Desk Accessory to print standard business size&a+120V
&k120H &k12Henvelopes on a Hewlett Packard DeskJet or DeskJet PLUS printer&a+120V
&k120H &k12H(and probably DeskJet 500).  The DeskJet is very good at printing&a+120V
&k120H &k12Henvelopes and this accessory makes it easy to do.&a+120V&a+120V
&k120H (s3B&d2D&k12HHow do I use it?(s0B    &d@&a+120V&a+120V
&k126H &k54H &k12HDJEPA is a standard Desk Accessory which uses standard GEM&a+120V
&k120H &k12Hdialogues.  If you're familiar with this, install ENVPRINT.ACC,&a+120V
&k120H &k12Hread from item 4 down and go play.  If you have no idea what any&a+120V
&k120H &k12Hof the above means, read on.&a+120V&a+120V
&k126H &k54H &k12H1.&k36H &k12HCopy the file ENVPRINT.ACC to the root directory of&a+120V
&k126H &k114H &k12Hyour boot disk.  &a+120V&k126H&k78H&k12Ha.&k36H &k12HHard Drive owners, this normally means C:. &a+120V
&k126H &k114H &k12Hb.&k36H &k12HFloppy only users, this means, put the disk you&a+120V
&k126H  &k48H &k12Hboot with in drive A and copy ENVPRINT.ACC to A:.&a+120V
&k126H &k54H &k12H2.&k36H &k12HRe-boot.  &a+120V&k120H&k12Ha.&k36H &k12HTOS 1.4 (or higher?) users:  Press&a+120V
&k126H  &k48H &k12HCONTROL+ALTERNATE+RIGHT-SHIFT+DELETE.  &a+120V
&k126H &k114H &k12Hb.&k36H &k12HDon't have TOS 1.4 (yet)?  Remove all disks from&a+120V
&k126H  &k48H &k12Hthe drives, turn the computer off, wait 30&a+120V
&k126H  &k48H &k12Hseconds, insert your boot disk (the one with&a+120V
&k126H  &k48H &k12HENVPRINT.ACC on the root directory) and turn the&a+120V
&k126H  &k48H &k12Hcomputer on.&l0C&a+255V&l0C&a+105V(10U(sp10h6vsb3t&k12H
&k100H &k13HDeskJet Envelope Printer Accessory&k126H  &k28H &k10HPage&k12H &k10H1(10U(sp10h12vsb3t&k10H
&k10H&a-360V&l0C&a+255V&a+255V&l0C&a+210V
&k126H &k54H &k12H3.&k36H &k12HTo print an envelope, select the Envelope Printer from&l0C&a+120V
&k126H &k114H &k12Hthe desk menu (fiji, Desk or whatever is the left most&a+120V
&k126H &k114H &k12Hmenu) and the main dialogue will appear.  Because DJEPA&a+120V
&k126H &k114H &k12His an accessory, it can pop up while running any GEM&a+120V
&k126H &k114H &k12Hprogram that uses the menu bar.&a+120V
&k126H &k114H &k12Ha.&k36H &k12HFill out the lines for Return address and Send&a+120V
&k126H  &k48H &k12Haddress.  Use the ESC key to clear any line.  The&a+120V
&k126H  &k48H &k12HTab, up and down arrow keys may be used to jump&a+120V
&k126H  &k48H &k12Hfrom one line to the next.  Right and left arrow&a+120V
&k126H  &k48H &k12Hkeys move the cursor right and left on the current&a+120V
&k126H  &k48H &k12Hline.  Clicking on a line with the mouse will move&a+120V
&k126H  &k48H &k12Hthe cursor to that line.&a+120V
&k126H &k114H &k12Hb.&k36H &k12HPress 'Return' or click on the Print button to&a+120V
&k126H  &k48H &k12Hprint the envelope.&a+120V
&k126H &k54H &k12H4.&k36H &k12HYou will be prompted to insert an envelope into the&a+120V
&k126H &k114H &k12Hchute at this point.  Consult the DeskJet printer&a+120V
&k126H &k114H &k12Hmanual for detailed information on how to load an&a+120V
&k126H &k114H &k12Henvelope.&a+120V&a+120V
&k120H &k12H   &d2DNOTE:&d@&k24H &k12HDo NOT press the UP and DOWN arrow keys on the DeskJet. &a+120V
&k126H &k114H &k12HDJEPA will load the envelope for you.&a+120V&a+120V
&k126H &k114H &k12Ha.&k36H &k12HOk, so you don't want to read the DeskJet manual. &a+120V
&k126H  &k48H &k12HRemove the smoke colored plastic cover from over&a+120V
&k126H  &k48H &k12Hthe out tray.  Hold the envelope with the flap&a+120V
&k126H  &k48H &k12Hfacing up, bend it in the middle and place it&a+120V
&k126H  &k48H &k12Hunder the wings, flush against the right side of&a+120V
&k126H  &k48H &k12Hthe out tray.  Better yet, read the manual. &a+120V&a+120V
&k120H &k12H   &d2DNOTE:&d@&k24H &k12HBe sure to push the envelope all the way back so it is&a+120V
&k126H &k114H &k12Hall the way under the rubber rollers.&a+120V&a+120V
&k126H &k114H &k12Hb.&k36H &k12HClick on Ok (or press Return) and DJEPA will load&a+120V
&k126H  &k48H &k12Hthe envelope and print the information you gave it&a+120V
&k126H  &k48H &k12Honto the envelope.  When the DeskJet is done&a+120V
&k126H  &k48H &k12Hprinting, it will eject the envelope.  The DeskJet&a+120V
&k126H  &k48H &k12Hdoesn't do a very good job of dropping envelopes&a+120V
&k126H  &k48H &k12Hinto the tray, so you will have to remove the&a+120V
&k126H  &k48H &k12Henvelope from the drop arms.&a+120V
&k126H &k54H &k12H5.&k36H &k12HClick on the Panic button for helpful information.&a+120V
&k126H &k54H &k12H6.&k36H &k12HClick on Quit button to leave.&a+120V&a+120V
&k126H &k54H &k12HPlease send me your comments.  Let me know what you would&a+120V
&k120H &k12Hlike to have added or changed.  What features would make this&a+120V
&k120H &k12Haccessory more useful to you?  If I don't hear anything, I can't&a+120V
&k120H &k12Hmake DJEPA better or fix any bugs that you may find.  I can be&a+120V
&k120H &k12Hreached by US Mail at:&k36H &k12HFred T. Dunaway&a+120V&k126H&k54H&k12H126 1/2 Old Liverpool Road&a+120V&k126H&k60H&k12HLiverpool, New York  13088&a+120V&a+120V
&k126H &k114H &k12Hor on GEnie at:&a+120V&k120H&k12HF.DUNAWAY1&l0C&a+240V(10U(sp10h6vsb3t&k12H
&k100H &k13HDeskJet Envelope Printer Accessory&k126H  &k28H &k10HPage&k12H &k10H2(10U(sp10h12vsb3t&k10H
&k10H&a-360V&l0C&a+255V&a+255V&l0C&a+210V
&k120H (s3B&d2D&k12HOther Neat Stuff(s0B   &d@&l0C&a+120V&a+120V&k126H&k42H&k12HI wrote this accessory for the fun of it and to find out&a+120V
&k120H &k12Hmore about how the ST works.  I used Laser C, v2.1, on a 1040ST&a+120V
&k120H &k12Hwith TOS 1.4 installed.  DJEPA has been tested on TOS 1.4 and&a+120V
&k120H &k12H1.0, but not 1.2.  There shouldn't be any problems with TOS 1.2,&a+120V
&k120H &k12Hbut the best laid plans of mice and men...&a+120V
&k126H &k54H &k12HI have a DeskJet PLUS and a friend of mine has an early&a+120V
&k120H &k12HDeskJet that we used for testing.  I don't have access to a&a+120V
&k120H &k12HDeskJet 500 for testing so I don't know how well DJEPA will work&a+120V
&k120H &k12Hwith it.  There shouldn't be any problem.  Could someone let me&a+120V
&k120H &k12Hknow about this?&a+120V&k126H&k6H&k12HSo far the only real problem I found is when an envelope&a+120V
&k120H &k12Hdoesn't get loaded properly and the rollers can't pick it up. &a+120V
&k120H &k12HWhen this happens, the DeskJet gets mad, blinks at you and won't&a+120V
&k120H &k12Hdo a thing until you reset it.  Sorry, I haven't been able to&a+120V
&k120H &k12Hfigure out how to get the ST to find out if the DeskJet is mad.&a+120V
&k126H &k54H &k12HLots of people don't want to use their DeskJet's for&a+120V
&k120H &k12Hprinting envelopes because the ink is water soluble.  Few people&a+120V
&k120H &k12Hrealize just how many inks are water soluble, so I don't see it&a+120V
&k120H &k12Has a real problem.  However, HP has a solution.  Reportedly, the&a+120V
&k120H &k12Hnew ink cartridges for the DeskJet 500 use water resistant ink&a+120V
&k120H &k12Hand may be used in all DeskJets.  The other possible solution is&a+120V
&k120H &k12Hto spray clear matting over the print.&a+120V
&k126H &k54H &k12HOn a fair number of ST's, DeskJet's will not respond if they&a+120V
&k120H &k12Hare turned on after the ST.  The solution is to place a diode in&a+120V
&k120H &k12Hthe printer cable.  There are how-to's on GEnie.  If you don't&a+120V
&k120H &k12Hhave acess to GEnie, send me a self-addressed stamped envelope&a+120V
&k120H &k12Hand I will send you how-to's.&a+120V&a+120V
&k120H &k12HRemember, Send in those comments!&a+120V&a+120V
&k120H &k12HFred T. Dunaway&a+120V&l0C&a+255V&a+255V&a+255V&a+255V&a+255V&a+255V&a+255V&a+255V&a+255V&l0C&a+105V(10U(sp10h6vsb3t&k12H
&k100H &k13HDeskJet Envelope Printer Accessory&k126H  &k28H &k10HPage&k12H &k10H3(10U(sp10h12vsb3t&k10H
E