A-Real Time Clock
                                 Version 3.60
                        Copyright (C) 1988,89,90,91 by
                                  Bill Penner

    The following changes have been made since version 3.5:

        1.    This  is  a  bug fix version.  A problem existed with the STe
    when  attempting  to boot using the AR35BOOT.PRG program which resulted
    in  4 bombs.  This problem has been corrected.  This problem would have
    resulted also if the STe ran a RAM TOS.  This version will not work yet
    for  the TT (a modification coming soon!).  Thanks to Terry O'Leary for
    enough information to find the bug.

    The following changes have been made since version 3.31:

        1.    The  boot  program  (AR36BOOT.PRG)  is now totally written in
    assembly  language  (MADMAC) and is somewhat smaller than the C version
    (even  with  improvements).   Much  of  the configuration and accessory
    programs have also be written in assembly (in-line Laser C assembly).

        2.    The  STe  ROM  locations are now supported, and routines have
    been written to locate the ROM's if the ROM's get moved again.  No more
    bombs when working on an STe (I hope).

        3.   Bad clock reads due to heavily loaded data lines caused by the
    addition of some 16 MHz upgrade boards should not happen any more.

        4.    If  the  system  program is run a second time, many times the
    system time would not be updated.  This is now fixed.

        5.    When  the  program was used with certain combinations of boot
    programs,  sometimes  the  system would do funny things (sometimes bomb
    too).  That problem has been fixed.

    The  software  is  FREEWARE.   You may use or distribute the program as
    much  as  you  wish  provided that the software is distributed with all
    files  intact and UNMODIFIED.  The software may NOT be sold, but may be
    included  on  user  group  disks  which are sold for a small cost.  The
    files  included  with  the  Version 3.50 distribution are: AREAL36.ACC,
    AR36_CNF.PRG, AR36BOOT.PRG, AR36READ.ME,
    and AREAL36.DOC.

    If  you  have  any problems running the software, please let me know so
    that I can fix the problem.



    Good Luck and Happy Computing...

    Bill Penner
    3235 Wright Avenue
    Bremerton, WA  98310

    Phone:          (206)373-4840 (BEFORE 9PM Pacific Time)
    BBS:            (206)479-2157 (300/1200/2400 24 Hours/Day 7 Days/Week)
    GEnie:          BPENNER
    Amateur Radio:  WB7DPF