The MT-32 Controller is a desk accessory designed to allow you
complete control over your Roland MT-32 synthesizer, even from
within your favorite (GEM) sequencer.  It also is a patch 
librarian, and allows you to take a "snapshot" of your MT-32
setup and save it to disk!  No more time wasted trying to 
reconfigure the "mix" you spent so much time setting. You'll be
able to restore any setup in seconds---even from within your
sequencer!

You'll also be able to access many otherwise inaccessable features 
of the MT-32, such as four different reverb types and individual
tuning or transposing of parts! 

At only $39.95, this is one accessory the MT-32 owner won't want
to be without!  

The disk should contain the following files:

MT32DEMO.ACC
MT32DEMO.RSC
DESKTOP.INF
READTHIS.TXT (this file)!

Both the MT32DEMO.ACC and MT32DEMO.RSC must be in the main 
directory of your boot disk in order to work! Although DESKTOP.INF
is not required, you must be in either High or Medium Resolution 
for the program to run.    

The program is activated by clicking on the MT-32 Demo entry of
the "Desk" menu.  Once opened, a dialog box will fill the screen
with the DEMO control panel!

Be sure the ST MIDI out port is connected to the MT-32 MIDI IN port!
If you have a master MIDI keyboard, connect it to the ST MIDI in:
a software thru is supplied by the program to allow you the 
ability to play the MIDI keyboard and still control the MT-32 from
your Atari ST!

To change a parameter, simply point to the up or down arrows on
either side and click with the left mouse button! Clicking on the
parameter value will reset it to the default value.  You may 
change patches by clicking on the patch name! 

To test a patch, click the right mouse button, or click with
the left button on "PLAY NOTE".  When using the right button to
play a note, you can increase the velocity by clicking further
on the right side of the screen, and play a higher note by
clicking higher on the screen!

The demo disables the following features:

     1) Loading and saving of patches and setups.
     2) All parts except PART #1.
     3) Retrieval and storage of setups.

To get the complete program and manual, send $39.95 to:

     David Barr
     34 NW Broadway
     Portland, OR  97209

Or ask for it at your favorite computer software or music store!