------------------------------------------------------------------------
                            PRINTER SETUP
------------------------------------------------------------------------

    In the following examples, the printer codes are for an Epson
Compatible printer. All printer commands are entered as decimal values
separated by commas with no spaces.

INITIALIZE:  The code needed to initialize your printer. 
    Example: 27,69

COMPRESSED PRINT ON:  Sets your printer to compressed or condensed type. 
This should be a font that is around 16 characters per inch (16CPI).  If
your printer does not support Compressed print, leave this blank. 
    Example:  27,66,3

COMPRESSED PRINT OFF:  The command to turn off Compressed type mode.
    Example:  27,66,1

USE COMPRESSED PRINT:  Only "Y" for Yes or "N" for No are valid in this
field.  If your printer does not support Compressed Print be SURE to set
this to "N".  By changing this setting you can easily turn compressed
print on and off without redefining your printer. 
    Example: Y

BOLD PRINT ON:  The command to turn on Bold print.  
    Example: 27,71

BOLD PRINT OFF:  Needed to turn Bold Print off.  
    Example: 27,72

TOP MARGIN:  The number of LINES between the top of the page and the
first line to print.  Catalog Printouts expect 8 1/2" x 11" paper.  The
Top Margin Setting is to help you center your printouts properly.  You
may have to run a couple of test printouts to get this right. 
    Example: 2
 
LEFT MARGIN:  The number of SPACES between the left side of the paper and
the first column of printed text.  Again, you may need to run a couple of
test prints to get this setting right.
    Example:  7

    After specifying your printer setup select SAVE (ABORT only if you
don't want to keep the changes you've made).
