From decwrl!ucbvax!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!allbery Sun Mar 11 17:18:45 PST 1990
Article 1400 of comp.sources.misc:
Path: decwrl!ucbvax!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!allbery
From: nelson@uncecs.edu@uncw.uucp (Jim Nelson)
Newsgroups: comp.sources.misc
Subject: v11i025: dialout -- another kill getty and kermit prog
Message-ID: <80894@uunet.UU.NET>
Date: 12 Mar 90 00:13:09 GMT
Sender: allbery@uunet.UU.NET
Lines: 508
Approved: allbery@uunet.UU.NET (Brandon S. Allbery - comp.sources.misc)

Posting-number: Volume 11, Issue 25
Submitted-by: nelson@uncecs.edu@uncw.uucp (Jim Nelson)
Archive-name: dialout/part01

#! /bin/sh
# This is a shell archive.  Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file".  To overwrite existing
# files, type "sh file -c".  You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g..  If this archive is complete, you
# will see the following message at the end:
#		"End of shell archive."
# Contents:  README dialout.1 Makefile dialout.c avatex.h courier.h
#   avatex.data courier.data
# Wrapped by nelson@uncw on Sun Mar 11 15:58:35 1990
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'README' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'README'\"
else
echo shar: Extracting \"'README'\" \(841 characters\)
sed "s/^X//" >'README' <<'END_OF_FILE'
XA program to kill the [getty|uugetty] on a terminal line,
Xand bring up a "kermit" on that line.  If the kermit is
Xshut down garacefully, the [getty|uugetty] is restarted.
XAttempts to gracefully interface with uucp and kermit
Xvia the "standard" lockfiles (your mileage in this regard
Xmay vary).  Works (has worked) with BSD 4.2 and SysVR3.
XYour luck with having a uugetty behave rationally with
Xkermit and/or uucp is problematical.
XTo install: edit avatex.h and courier.h to reflect your
X"tty" lines.  Then edit Makefile to reflect your system.
XThen "make".  Then (you'll have to go root here) "make install".
XYou must be root to install this program, and it must run
Xsuid root (lockfile stuff, etc.).  Examine the source carefully
Xif you are wary of suid root programs.
XPublic domain.
X-- jim nelson, unc-wilmington, nelson@ecsvax.uncecs.edu
END_OF_FILE
if test 841 -ne `wc -c <'README'`; then
    echo shar: \"'README'\" unpacked with wrong size!
fi
# end of 'README'
fi
if test -f 'dialout.1' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'dialout.1'\"
else
echo shar: Extracting \"'dialout.1'\" \(400 characters\)
sed "s/^X//" >'dialout.1' <<'END_OF_FILE'
X.TH DIALOUT 1 Local
X.UC 4
X.SH NAME
Xdialout \- kill getty and bring up kermit on modem
X.SH SYNOPSIS
X.B dialout
X.SH DESCRIPTION
XShuts down the getty and brings up Kermit on the 1200 baud
Xcourier modem line (/dev/ttyd8).
X.SH NOTES
XThe user should be familiar with the AT command set for the
Xparticular modem in use (Courier 1200, in this case).
X.SH AUTHOR
XJ. Nelson, UNCW, BSD 21 Apr 89, SysV 11 Mar 90
END_OF_FILE
if test 400 -ne `wc -c <'dialout.1'`; then
    echo shar: \"'dialout.1'\" unpacked with wrong size!
fi
# end of 'dialout.1'
fi
if test -f 'Makefile' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'Makefile'\"
else
echo shar: Extracting \"'Makefile'\" \(1230 characters\)
sed "s/^X//" >'Makefile' <<'END_OF_FILE'
XCFLAGS=
XSYS=SYSV#BSD
X
X#/*where to install this thing*/
XWHERE=/usr/local/bin
X
Xall: dirs dial2400 dialout
X
Xdialout: dialout.o
X	cp courier.h courier/dialout.h
X	cc -s -o dialout dialout.o
X
Xdial2400: dial2400.o
X	cp avatex.h avatex/dialout.h
X	cc -s -o dial2400 dial2400.o
X
Xdialout.o: dialout.c courier.h
X	cp courier.h courier/dialout.h
X	cc -D$(SYS) -c -Icourier dialout.c
X
Xdial2400.o: dialout.c avatex.h
X	rm -f dial2400.c
X	cp avatex.h avatex/dialout.h
X	ln dialout.c dial2400.c
X	cc -D$(SYS) -c -Iavatex dial2400.c
X
Xinstall: dialout dial2400
X	mv dialout $(WHERE)/dialout
X	chown root $(WHERE)/dialout
X	chmod u+s $(WHERE)/dialout
X	mv dial2400 $(WHERE)/dial2400
X	chown root $(WHERE)/dial2400
X	chmod u+s $(WHERE)/dial2400
X	cp avatex.data $(WHERE)/avatex.data
X	cp courier.data $(WHERE)/courier.data
X
Xclean:
X	rm -f dialout dial2400* *.i *.o
X
Xdirs: avatex courier avatex.h courier.h avatex.data courier.data
X
Xavatex:
X	sh -c "if test -d avatex; then : ;else mkdir avatex;fi"
X
Xcourier:
X	sh -c "if test -d courier; then : ;else mkdir courier;fi"
X
Xkit:
X	cp avatex/dialout.h ./avatex.h
X	cp $(WHERE)/avatex.data ./avatex.data
X	cp courier/dialout.h ./courier.h
X	cp $(WHERE)/courier.data ./courier.data
X	shar README *1 Makefile dialout.c *.h *.data>kit
END_OF_FILE
if test 1230 -ne `wc -c <'Makefile'`; then
    echo shar: \"'Makefile'\" unpacked with wrong size!
fi
# end of 'Makefile'
fi
if test -f 'dialout.c' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'dialout.c'\"
else
echo shar: Extracting \"'dialout.c'\" \(4936 characters\)
sed "s/^X//" >'dialout.c' <<'END_OF_FILE'
X/* program to kill getty & bring up kermit on a tty line*/
X/* probably dynix specific ... don't know, don't care */
X/* j. nelson, (nelson@uncw.uucp) (nelson@ecsvax.uncecs.edu) */
X/* latest revision 
XSat Mar 10 15:32:08 EST 1990
X*/
X#include <stdio.h>
X#include <fcntl.h>
X#include <pwd.h>
X#include <sys/types.h>
X#include <sys/stat.h>
X
X#include "dialout.h"
X/* the dialout.h files should be in specific subdirectories, e.g.*/
X/*avatex, courier, etc. */
Xmain(argc,argv)char *argv[];
X{
X	int i,fd; 
X		unsigned long t;
X	FILE *fp;
X	char buf[120], name[12], *strncpy();
X	struct passwd *p, *getpwuid();
X	char *q, *getlogin();
X
X	(void)argc;
X	(void)argv; /*strictly for lint*/
X	q=getlogin();
X	if(!authorized(q)){
X		fprintf(stderr,"%s not authorized to dialout\n",q);
X		exit(1);
X		}
X	{
X		fp=fopen("/tmp/dialoutlog","a");
X		if(!fp)exit(2);
X		t=time(0);
X		fprintf(fp," + %s %s",q,ctime(&t));
X		fclose(fp);
X
X	}
X	if(geteuid()!=0){
X		fprintf(stderr,"oops, this prog should be setuid root\n");
X		error(1);
X	}
X	fiddle();
X	p = getpwuid(getuid());
X	(void)strncpy(name,p->pw_name,11);
X	for(i=0;i<12;i++)if(name[i]<' ' || name[i]>0176)name[i]=0;
X	fprintf(stderr,"%s\n",name);
X	if(stat(LCKFILE,(struct stat *)0)>=0)
X	{
X		fd=open(LCKFILE,0);
X		if(fd>=0){
X			fprintf(stderr,"oops\n");
X			fprintf(stderr,"%s busy\n",LCKFILE);
X			i=read(fd,buf,11);
X			if(i>0)fprintf(stderr,"by %s ... try later\n",buf);
X			error(2);
X		}
X	}
X	else {
X		fprintf(stderr,"ok no lock\n");
X	}
X	(void)system(SED1);
X/*	(void)system("	diff /etc/ttys /tmp/dialout.tmp");*/
X	(void)system(DIFF1);
X/*	(void)system("	cp /etc/ttys /etc/ttys.bak.tst");*/
X	(void)system(CP1);
X/*	(void)system("	cp /tmp/dialout.tmp /etc/ttys");*/
X	(void)system(CP2);
X	i=kill(1,1); /*kill(pid,signal)*/
X	if(i<0){
X		fprintf(stderr,"could not kill(1,1)\n");
X		error(3);
X	}
X	(void)system("	rm -f /tmp/dialout.tmp" );
X	fd=open(DEVICE,1);
X	if(fd<0){
X		error(4);
X	}
X	i=write(fd,S1,S1L);
X	if(i<0)error(5);
X	sleep(1);
X	(void)system(CAT);
X
X	fiddle();
X/*	i=fchown(fd,getuid(),getgid());*/
X/* apparently SysV does not have fchown() nor fchmod() :-(  */
X	i=chown(DEVICE,getuid(),getgid());
X	if(i<0)error(6);
X/*	i=fchmod(fd,0666);*/
X	i=chmod(DEVICE,0666);
X	if(i<0)error(7);
X	i=close(fd);
X	if(i<0)error(8);
X
X	if(fork()==0)
X	{
X		/*child*/
X		i=setuid(getuid());/*relinquish root privileges in child*/
X		if(i<0 || geteuid()==0)error(9);
X		fprintf(stderr,"PLEASE exit from kermit normally so that\n");
X		fprintf(stderr,"the modem line can be reset properly.\n");
X		fprintf(stderr,
X		"The proper way is ctrl-\\, then \"c\", then \"ex\"\n");
X
X		(void)execl(KERMIT,"kermit","-l",DEVICE,
X		"-b",SPEED,(char *)NULL);
X		fprintf(stderr,"exec failed\n");/*should never happen*/
X		error(10);/*should never happen*/
X	}
X	else
X	{
X		/*parent*/
X		/* (parent is still root) */
X		(void)wait(0);
X		fd=open(DEVICE,1);
X		if(fd<0){
X			error(11);
X		}
X		i=write(fd,S2,S2L);
X		if(i<0)error(12);
X		fprintf(stderr,"wait...\n");
X		sleep(2);
X/*	i=fchown(fd,0,0);*/
X	i=chown(DEVICE,0,0);
X	if(i<0)error(6);
X/*	i=fchmod(fd,0666);*/
X	i=chmod(DEVICE,0666);
X	if(i<0)error(7);
X		i=close(fd);
X		if(i<0)error(13);
X		(void)unlink(LCKFILE); /*ignore error, because kermit didit*/
X		(void)system(SED2);
X
X/*		(void)system("	diff /etc/ttys /tmp/dialout.tmp");*/
X		(void)system(DIFF2);
X/*		(void)system("	cp /tmp/dialout.tmp /etc/ttys");*/
X		(void)system(CP3);
X		i=kill(1,1); /*kill(pid,signal)*/
X		if(i== -1){
X			fprintf(stderr,"could not kill(1,1)\n");
X			if(getuid()!=0 && getuid()!=100)error(14);
X		}
X		(void)system("	rm -f /tmp/dialout.tmp" );
X
X	
X		fp=fopen("/tmp/dialoutlog","a");
X		if(!fp)exit(2);
X		t=time(0);
X		fprintf(fp," - %s %s",q,ctime(&t));
X		fclose(fp);
X
X	
X	}
X}
Xfiddle()
X{
X	struct passwd *p;
X	struct stat zork;
X	int i,c;
X	i=stat(DEVICE,&zork);
X	if(i<0)error(15);
X	if(zork.st_uid != 0){
X		p=getpwuid(zork.st_uid);
X		fprintf(stderr,
X		"the modem seems to be owned by %s\n",/*zork.st_uid*/p->pw_name);
X		fprintf(stderr,"do you wish to barge right on through?");
X		c=getchar(); while(getchar()!='\n');
X		if(c!='y')error(16);
X	}
X	if((zork.st_mode & 0777) != 0622){
X		fprintf(stderr,"%s has wrong mode\n",DEVICE);
X		fprintf(stderr,"do you wish to barge right on through?");
X		c=getchar(); while(getchar()!='\n');
X		if(c!='y')error(17);
X	}
X}
Xerror(i)
X{
X	FILE *fp;
X	char *q;
X	unsigned long t;
X	fprintf(stderr,"error %d\n",i);
X	(void)fflush(stderr);
X		fp=fopen("/tmp/dialoutlog","a");
X		if(!fp)exit(2);
X		t=time(0);
X		q=getlogin();
X		fprintf(fp," - error %d %s %s",i,q,ctime(&t));
X		fclose(fp);
X	exit(i);
X}
Xkindex(s,t) 
Xchar s[],t[];
X{
X	int c,i,j,k;
X	c=s[0];
X	if(c==0){return -1;
X		}
X	c=t[0];
X	if(c==0){return -1;
X		}
X	for(i=0;s[i] !='\0'; i++){
X		for(j=i,k=0;t[k] !='\0' && s[j]==t[k];j++,k++)
X				;
X		if(t[k]=='\0')return (i);
X	}
X		return(-1);
X} 
Xauthorized(name)
Xchar *name;
X{
X	FILE *fp;
X	int k;
X	char buf[99];
X	fp=fopen(AUTHFILE,"r");
X	if(!fp)return 0;
X	while( fgets(buf,98,fp)==buf){
X	if(kindex(buf,name)==0){
X		fclose(fp);
X		return 1;
X	}
X	}
X	fclose(fp);
X	return 0;
X
X}
END_OF_FILE
if test 4936 -ne `wc -c <'dialout.c'`; then
    echo shar: \"'dialout.c'\" unpacked with wrong size!
fi
# end of 'dialout.c'
fi
if test -f 'avatex.h' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'avatex.h'\"
else
echo shar: Extracting \"'avatex.h'\" \(1200 characters\)
sed "s/^X//" >'avatex.h' <<'END_OF_FILE'
X#define LCKFILE "/usr/spool/uucp/LCK/LCK..ttyh0"
X#define KERMIT "/usr/uncw/kermit" /*where you keep your kermit*/
X#ifdef BSD
X#define DEVICE "/dev/ttyh0"
X#else
X#define DEVICE "/dev/contty"
X#endif
X#define SPEED "2400"
X#define S1 "ate1q0x4v1\015"
X#define S2 "atz\015"
X#define S1L strlen(S1)
X#define S2L strlen(S2)
X#ifdef BSD
X#define SED1 "sed '/ttyh0/s/^1/0/' /etc/ttys >/tmp/dialout.tmp"
X#define SED2 "sed '/ttyh0/s/^0/1/' /etc/ttys >/tmp/dialout.tmp"
X#else
X/*SysV*/
X#define SED1 "sed '/^ct:/s/respawn/off/' /etc/inittab>/tmp/dialout.tmp"
X#define SED2 "sed '/^ct:/s/off/respawn/' /etc/inittab>/tmp/dialout.tmp"
X#endif
X#define CAT "cat /usr/lib/uucp/avatex.data"
X#define AUTHFILE "/etc/dialout.auth"
X#ifdef BSD
X#define DIFF1	"diff /etc/ttys /tmp/dialout.tmp"
X#define CP1		"cp /etc/ttys /etc/ttys.bak.tst"
X#define CP2		"cp /tmp/dialout.tmp /etc/ttys"
X#define DIFF2	"diff /etc/ttys /tmp/dialout.tmp"
X#define CP3		"cp /tmp/dialout.tmp /etc/ttys"
X#else
X#define DIFF1	"diff /etc/inittab /tmp/dialout.tmp"
X#define CP1		"cp /etc/inittab /etc/ttys.bak.tst"
X#define CP2		"cp /tmp/dialout.tmp /etc/inittab"
X#define DIFF2	"diff /etc/inittab /tmp/dialout.tmp"
X#define CP3		"cp /tmp/dialout.tmp /etc/inittab"
X#endif
END_OF_FILE
if test 1200 -ne `wc -c <'avatex.h'`; then
    echo shar: \"'avatex.h'\" unpacked with wrong size!
fi
# end of 'avatex.h'
fi
if test -f 'courier.h' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'courier.h'\"
else
echo shar: Extracting \"'courier.h'\" \(1200 characters\)
sed "s/^X//" >'courier.h' <<'END_OF_FILE'
X#define LCKFILE "/usr/spool/uucp/LCK/LCK..ttyh0"
X#define KERMIT "/usr/uncw/kermit" /*where you keep your kermit*/
X#ifdef BSD
X#define DEVICE "/dev/ttyh8"
X#else
X#define DEVICE "/dev/contty"
X#endif
X#define SPEED "1200"
X#define S1 "ate1q0x4v1\015"
X#define S2 "atz\015"
X#define S1L strlen(S1)
X#define S2L strlen(S2)
X#ifdef BSD
X#define SED1 "sed '/ttyh0/s/^1/0/' /etc/ttys >/tmp/dialout.tmp"
X#define SED2 "sed '/ttyh0/s/^0/1/' /etc/ttys >/tmp/dialout.tmp"
X#else
X/*SysV*/
X#define SED1 "sed '/^ct:/s/respawn/off/' /etc/inittab>/tmp/dialout.tmp"
X#define SED2 "sed '/^ct:/s/off/respawn/' /etc/inittab>/tmp/dialout.tmp"
X#endif
X#define CAT "cat /usr/lib/uucp/avatex.data"
X#define AUTHFILE "/etc/dialout.auth"
X#ifdef BSD
X#define DIFF1	"diff /etc/ttys /tmp/dialout.tmp"
X#define CP1		"cp /etc/ttys /etc/ttys.bak.tst"
X#define CP2		"cp /tmp/dialout.tmp /etc/ttys"
X#define DIFF2	"diff /etc/ttys /tmp/dialout.tmp"
X#define CP3		"cp /tmp/dialout.tmp /etc/ttys"
X#else
X#define DIFF1	"diff /etc/inittab /tmp/dialout.tmp"
X#define CP1		"cp /etc/inittab /etc/ttys.bak.tst"
X#define CP2		"cp /tmp/dialout.tmp /etc/inittab"
X#define DIFF2	"diff /etc/inittab /tmp/dialout.tmp"
X#define CP3		"cp /tmp/dialout.tmp /etc/inittab"
X#endif
END_OF_FILE
if test 1200 -ne `wc -c <'courier.h'`; then
    echo shar: \"'courier.h'\" unpacked with wrong size!
fi
# end of 'courier.h'
fi
if test -f 'avatex.data' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'avatex.data'\"
else
echo shar: Extracting \"'avatex.data'\" \(7 characters\)
sed "s/^X//" >'avatex.data' <<'END_OF_FILE'
XHayes?
END_OF_FILE
if test 7 -ne `wc -c <'avatex.data'`; then
    echo shar: \"'avatex.data'\" unpacked with wrong size!
fi
# end of 'avatex.data'
fi
if test -f 'courier.data' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'courier.data'\"
else
echo shar: Extracting \"'courier.data'\" \(777 characters\)
sed "s/^X//" >'courier.data' <<'END_OF_FILE'
Xc0=transmitter disabled, c1=transmitter enabled
Xd p=pulse, t=tone, ','=pause 2 sec, ';'=return to command state
X  !=flash hook, w=wait for 2nd dialtone (x3 or higher)
X  @=wait for answer (x3 or higher), r=reverse roles
Xe0=echo off, e1=echo on
Xf0=half duples, f1=full duples
Xh0=hang up, h1=go off hook
Xi0=product code, i1=rom cksum, i2=ram test, i3=return call duration/
X   real time, i4=display current settings
Xk0=at ati3 display call duration, k1=real time
Xm0=speaker off, m1=speaker on until connect, m2=always on
Xo=return online
Xp=pulse dial
Xq0=result codes displayed, q1=quiet mode
Xv0=numeric mode, v1=verbal mode
Xx0-6=verbosity level(6 is most verbose)
Xz=reset to default
X>=repeat command continuously
X$=help command summary
XD$=dial help commands
Xs$=s-reg help commands
X
END_OF_FILE
if test 777 -ne `wc -c <'courier.data'`; then
    echo shar: \"'courier.data'\" unpacked with wrong size!
fi
# end of 'courier.data'
fi
echo shar: End of shell archive.
exit 0