From decwrl!ucbvax!tut.cis.ohio-state.edu!snorkelwacker!mit-eddie!uw-beaver!zephyr.ens.tek.com!tekred!saab!billr Sat Feb 10 18:50:54 PST 1990 Article 804 of comp.sources.games: Path: decwrl!ucbvax!tut.cis.ohio-state.edu!snorkelwacker!mit-eddie!uw-beaver!zephyr.ens.tek.com!tekred!saab!billr From: billr@saab.CNA.TEK.COM (Bill Randle) Newsgroups: comp.sources.games Subject: v08i086: life - Conway's simulation of birth and death, Part02/02 Message-ID: <5147@tekred.CNA.TEK.COM> Date: 6 Feb 90 17:44:00 GMT Sender: news@tekred.CNA.TEK.COM Lines: 783 Approved: billr@saab.CNA.TEK.COM Submitted-by: local%rupley.UUCP@cs.arizona.edu Posting-number: Volume 8, Issue 86 Archive-name: life/Part02 #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh 'Makefile.sys5' <<'END_OF_FILE' XXOPT = # for command-line extra options XCFLAGS = -O -Ml $(XOPT) XLDFLAGS = XLIBES = -lcurses XTESTFLAGS = -c5 -g30 XTEST= gliders.4 XPATDIR= ./patterns X Xtest: life X time life $(TESTFLAGS) $(PATDIR)/$(TEST) X Xlife: life.c X cc life.c $(CFLAGS) $(LDFLAGS) $(LIBES) -o life X Xlife1020: life.c X cc life.c $(CFLAGS) -DXMAX=10 -DYMAX=20 $(LDFLAGS) $(LIBES) -o life1020 X Xclean: X rm life life1020 X END_OF_FILE if test 387 -ne `wc -c <'Makefile.sys5'`; then echo shar: \"'Makefile.sys5'\" unpacked with wrong size! fi # end of 'Makefile.sys5' fi if test -f 'patterns/center' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/center'\" else echo shar: Extracting \"'patterns/center'\" \(2 characters\) sed "s/^X//" >'patterns/center' <<'END_OF_FILE' Xx END_OF_FILE if test 2 -ne `wc -c <'patterns/center'`; then echo shar: \"'patterns/center'\" unpacked with wrong size! fi # end of 'patterns/center' fi if test -f 'patterns/glider' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/glider'\" else echo shar: Extracting \"'patterns/glider'\" \(11 characters\) sed "s/^X//" >'patterns/glider' <<'END_OF_FILE' X * X * X*** END_OF_FILE if test 11 -ne `wc -c <'patterns/glider'`; then echo shar: \"'patterns/glider'\" unpacked with wrong size! fi # end of 'patterns/glider' fi if test -f 'patterns/gliders.1' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/gliders.1'\" else echo shar: Extracting \"'patterns/gliders.1'\" \(341 characters\) sed "s/^X//" >'patterns/gliders.1' <<'END_OF_FILE' X x x x x x x x x x x X x x x x x x x x x x X xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx END_OF_FILE if test 341 -ne `wc -c <'patterns/gliders.1'`; then echo shar: \"'patterns/gliders.1'\" unpacked with wrong size! fi # end of 'patterns/gliders.1' fi if test -f 'patterns/gliders.2' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/gliders.2'\" else echo shar: Extracting \"'patterns/gliders.2'\" \(979 characters\) sed "s/^X//" >'patterns/gliders.2' <<'END_OF_FILE' Xxxx xxx xxx xxx xxx xxx xxx xxx xxx xxx Xx x x x x x x x x x X x x x x x x x x x x X X X x x x x x x x x x x Xx x x x x x x x x x Xxxx xxx xxx xxx xxx xxx xxx xxx xxx xxx X END_OF_FILE if test 979 -ne `wc -c <'patterns/gliders.2'`; then echo shar: \"'patterns/gliders.2'\" unpacked with wrong size! fi # end of 'patterns/gliders.2' fi if test -f 'patterns/gliders.3' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/gliders.3'\" else echo shar: Extracting \"'patterns/gliders.3'\" \(108 characters\) sed "s/^X//" >'patterns/gliders.3' <<'END_OF_FILE' Xxxx xxx Xx x X x x X X X x x Xx x Xxxx xxx END_OF_FILE if test 108 -ne `wc -c <'patterns/gliders.3'`; then echo shar: \"'patterns/gliders.3'\" unpacked with wrong size! fi # end of 'patterns/gliders.3' fi if test -f 'patterns/gliders.4' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/gliders.4'\" else echo shar: Extracting \"'patterns/gliders.4'\" \(693 characters\) sed "s/^X//" >'patterns/gliders.4' <<'END_OF_FILE' Xxxx xxx xxx xxx xxx xxx Xx x x x x x X x x x x x x X X X x x x x X x x x x X xxx xxx xxx xxx END_OF_FILE if test 693 -ne `wc -c <'patterns/gliders.4'`; then echo shar: \"'patterns/gliders.4'\" unpacked with wrong size! fi # end of 'patterns/gliders.4' fi if test -f 'patterns/gliders.5' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/gliders.5'\" else echo shar: Extracting \"'patterns/gliders.5'\" \(341 characters\) sed "s/^X//" >'patterns/gliders.5' <<'END_OF_FILE' X xxx x xxx x xxx x xxx x xxx x X x x x x x x x x x x X x xxx x xxx x xxx x xxx x xxx END_OF_FILE if test 341 -ne `wc -c <'patterns/gliders.5'`; then echo shar: \"'patterns/gliders.5'\" unpacked with wrong size! fi # end of 'patterns/gliders.5' fi if test -f 'patterns/glidgun' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/glidgun'\" else echo shar: Extracting \"'patterns/glidgun'\" \(272 characters\) sed "s/^X//" >'patterns/glidgun' <<'END_OF_FILE' X xx X xx x X xx xxxxx xx X xx xxx x xx x X xx xx xx x xx X xx x x xx X xx x X x X xx END_OF_FILE if test 272 -ne `wc -c <'patterns/glidgun'`; then echo shar: \"'patterns/glidgun'\" unpacked with wrong size! fi # end of 'patterns/glidgun' fi if test -f 'patterns/line.horiz' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/line.horiz'\" else echo shar: Extracting \"'patterns/line.horiz'\" \(71 characters\) sed "s/^X//" >'patterns/line.horiz' <<'END_OF_FILE' X********************************************************************** END_OF_FILE if test 71 -ne `wc -c <'patterns/line.horiz'`; then echo shar: \"'patterns/line.horiz'\" unpacked with wrong size! fi # end of 'patterns/line.horiz' fi if test -f 'patterns/line.vert' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/line.vert'\" else echo shar: Extracting \"'patterns/line.vert'\" \(98 characters\) sed "s/^X//" >'patterns/line.vert' <<'END_OF_FILE' X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* X* END_OF_FILE if test 98 -ne `wc -c <'patterns/line.vert'`; then echo shar: \"'patterns/line.vert'\" unpacked with wrong size! fi # end of 'patterns/line.vert' fi if test -f 'patterns/newgun' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/newgun'\" else echo shar: Extracting \"'patterns/newgun'\" \(306 characters\) sed "s/^X//" >'patterns/newgun' <<'END_OF_FILE' X x X xx xx xx X xx xx xx X xx xx X X X X xx xx X xx xx X xx xx X x X X X X Xxxx xxx Xx x x x Xx x X X x x X xx xx X X X X X X X X X X X Xxx xx Xxx xx END_OF_FILE if test 306 -ne `wc -c <'patterns/newgun'`; then echo shar: \"'patterns/newgun'\" unpacked with wrong size! fi # end of 'patterns/newgun' fi if test -f 'patterns/nonterm.1' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/nonterm.1'\" else echo shar: Extracting \"'patterns/nonterm.1'\" \(12 characters\) sed "s/^X//" >'patterns/nonterm.1' <<'END_OF_FILE' Xxxx Xx x Xx x END_OF_FILE if test 12 -ne `wc -c <'patterns/nonterm.1'`; then echo shar: \"'patterns/nonterm.1'\" unpacked with wrong size! fi # end of 'patterns/nonterm.1' fi if test -f 'patterns/nonterm.2' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/nonterm.2'\" else echo shar: Extracting \"'patterns/nonterm.2'\" \(16 characters\) sed "s/^X//" >'patterns/nonterm.2' <<'END_OF_FILE' X x X x Xxx xxx END_OF_FILE if test 16 -ne `wc -c <'patterns/nonterm.2'`; then echo shar: \"'patterns/nonterm.2'\" unpacked with wrong size! fi # end of 'patterns/nonterm.2' fi if test -f 'patterns/nonterm.3' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/nonterm.3'\" else echo shar: Extracting \"'patterns/nonterm.3'\" \(10 characters\) sed "s/^X//" >'patterns/nonterm.3' <<'END_OF_FILE' X xx Xxx X x END_OF_FILE if test 10 -ne `wc -c <'patterns/nonterm.3'`; then echo shar: \"'patterns/nonterm.3'\" unpacked with wrong size! fi # end of 'patterns/nonterm.3' fi if test -f 'patterns/nonterm.4' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/nonterm.4'\" else echo shar: Extracting \"'patterns/nonterm.4'\" \(12 characters\) sed "s/^X//" >'patterns/nonterm.4' <<'END_OF_FILE' X x Xxxx Xx xx END_OF_FILE if test 12 -ne `wc -c <'patterns/nonterm.4'`; then echo shar: \"'patterns/nonterm.4'\" unpacked with wrong size! fi # end of 'patterns/nonterm.4' fi if test -f 'patterns/oscpuls.1' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpuls.1'\" else echo shar: Extracting \"'patterns/oscpuls.1'\" \(23 characters\) sed "s/^X//" >'patterns/oscpuls.1' <<'END_OF_FILE' Xx x X x Xx x X xxxx END_OF_FILE if test 23 -ne `wc -c <'patterns/oscpuls.1'`; then echo shar: \"'patterns/oscpuls.1'\" unpacked with wrong size! fi # end of 'patterns/oscpuls.1' fi if test -f 'patterns/oscpuls.2' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpuls.2'\" else echo shar: Extracting \"'patterns/oscpuls.2'\" \(82 characters\) sed "s/^X//" >'patterns/oscpuls.2' <<'END_OF_FILE' X x X x x X x x x xx X x x xx Xxx xx x Xx x x X xxxx X X xx X xx END_OF_FILE if test 82 -ne `wc -c <'patterns/oscpuls.2'`; then echo shar: \"'patterns/oscpuls.2'\" unpacked with wrong size! fi # end of 'patterns/oscpuls.2' fi if test -f 'patterns/oscpuls.3' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpuls.3'\" else echo shar: Extracting \"'patterns/oscpuls.3'\" \(138 characters\) sed "s/^X//" >'patterns/oscpuls.3' <<'END_OF_FILE' X xx X x X x X xx X xx xx X x xxx x X x xx X x x Xxx x x x Xx xx x xx X x x X x x X x END_OF_FILE if test 138 -ne `wc -c <'patterns/oscpuls.3'`; then echo shar: \"'patterns/oscpuls.3'\" unpacked with wrong size! fi # end of 'patterns/oscpuls.3' fi if test -f 'patterns/oscpulsb.1' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpulsb.1'\" else echo shar: Extracting \"'patterns/oscpulsb.1'\" \(44 characters\) sed "s/^X//" >'patterns/oscpulsb.1' <<'END_OF_FILE' X xx xx X xx xx X x x Xx x x x Xx x x x Xxx xx END_OF_FILE if test 44 -ne `wc -c <'patterns/oscpulsb.1'`; then echo shar: \"'patterns/oscpulsb.1'\" unpacked with wrong size! fi # end of 'patterns/oscpulsb.1' fi if test -f 'patterns/oscpulsb.2' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpulsb.2'\" else echo shar: Extracting \"'patterns/oscpulsb.2'\" \(37 characters\) sed "s/^X//" >'patterns/oscpulsb.2' <<'END_OF_FILE' X x X x x X Xxx x Xx x X x x X xx END_OF_FILE if test 37 -ne `wc -c <'patterns/oscpulsb.2'`; then echo shar: \"'patterns/oscpulsb.2'\" unpacked with wrong size! fi # end of 'patterns/oscpulsb.2' fi if test -f 'patterns/oscpulsb.3' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpulsb.3'\" else echo shar: Extracting \"'patterns/oscpulsb.3'\" \(39 characters\) sed "s/^X//" >'patterns/oscpulsb.3' <<'END_OF_FILE' X xx X xx X X x Xx x Xx x xx X x xx X xx END_OF_FILE if test 39 -ne `wc -c <'patterns/oscpulsb.3'`; then echo shar: \"'patterns/oscpulsb.3'\" unpacked with wrong size! fi # end of 'patterns/oscpulsb.3' fi if test -f 'patterns/oscpulsb.4' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/oscpulsb.4'\" else echo shar: Extracting \"'patterns/oscpulsb.4'\" \(29 characters\) sed "s/^X//" >'patterns/oscpulsb.4' <<'END_OF_FILE' X x x Xxx xxxx xx X x x END_OF_FILE if test 29 -ne `wc -c <'patterns/oscpulsb.4'`; then echo shar: \"'patterns/oscpulsb.4'\" unpacked with wrong size! fi # end of 'patterns/oscpulsb.4' fi if test -f 'patterns/puffera' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/puffera'\" else echo shar: Extracting \"'patterns/puffera'\" \(68 characters\) sed "s/^X//" >'patterns/puffera' <<'END_OF_FILE' Xx x X x Xx x X xxxx X X X Xx X xx X x X x X x X X Xx x X x Xx x X xxxx END_OF_FILE if test 68 -ne `wc -c <'patterns/puffera'`; then echo shar: \"'patterns/puffera'\" unpacked with wrong size! fi # end of 'patterns/puffera' fi if test -f 'patterns/square' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/square'\" else echo shar: Extracting \"'patterns/square'\" \(778 characters\) sed "s/^X//" >'patterns/square' <<'END_OF_FILE' Xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx Xx x Xx x Xx x Xx x Xx xxxxxxxxxx xxxxxxxxxx x Xx x x x Xx x x x Xx x x x X x Xx x x x Xx x x x Xx x x x Xx xxxxxxxxxx xxxxxxxxxx x Xx x Xx x Xx x Xx x Xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx END_OF_FILE if test 778 -ne `wc -c <'patterns/square'`; then echo shar: \"'patterns/square'\" unpacked with wrong size! fi # end of 'patterns/square' fi if test -f 'patterns/switch' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'patterns/switch'\" else echo shar: Extracting \"'patterns/switch'\" \(20 characters\) sed "s/^X//" >'patterns/switch' <<'END_OF_FILE' X x x Xx X x x X xxx END_OF_FILE if test 20 -ne `wc -c <'patterns/switch'`; then echo shar: \"'patterns/switch'\" unpacked with wrong size! fi # end of 'patterns/switch' fi if test -f 'xpatterns/explodes' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/explodes'\" else echo shar: Extracting \"'xpatterns/explodes'\" \(30 characters\) sed "s/^X//" >'xpatterns/explodes' <<'END_OF_FILE' Xx x x Xx x Xx x Xx x Xx x x END_OF_FILE if test 30 -ne `wc -c <'xpatterns/explodes'`; then echo shar: \"'xpatterns/explodes'\" unpacked with wrong size! fi # end of 'xpatterns/explodes' fi if test -f 'xpatterns/exploding.1' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/exploding.1'\" else echo shar: Extracting \"'xpatterns/exploding.1'\" \(14 characters\) sed "s/^X//" >'xpatterns/exploding.1' <<'END_OF_FILE' X x Xxxx Xx x X x END_OF_FILE if test 14 -ne `wc -c <'xpatterns/exploding.1'`; then echo shar: \"'xpatterns/exploding.1'\" unpacked with wrong size! fi # end of 'xpatterns/exploding.1' fi if test -f 'xpatterns/exploding.2' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/exploding.2'\" else echo shar: Extracting \"'xpatterns/exploding.2'\" \(14 characters\) sed "s/^X//" >'xpatterns/exploding.2' <<'END_OF_FILE' Xxx Xx x X xx X x END_OF_FILE if test 14 -ne `wc -c <'xpatterns/exploding.2'`; then echo shar: \"'xpatterns/exploding.2'\" unpacked with wrong size! fi # end of 'xpatterns/exploding.2' fi if test -f 'xpatterns/exploding.3' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/exploding.3'\" else echo shar: Extracting \"'xpatterns/exploding.3'\" \(14 characters\) sed "s/^X//" >'xpatterns/exploding.3' <<'END_OF_FILE' X x Xxx Xx x X xx END_OF_FILE if test 14 -ne `wc -c <'xpatterns/exploding.3'`; then echo shar: \"'xpatterns/exploding.3'\" unpacked with wrong size! fi # end of 'xpatterns/exploding.3' fi if test -f 'xpatterns/exploding.4' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/exploding.4'\" else echo shar: Extracting \"'xpatterns/exploding.4'\" \(14 characters\) sed "s/^X//" >'xpatterns/exploding.4' <<'END_OF_FILE' X xx Xxx x X xx END_OF_FILE if test 14 -ne `wc -c <'xpatterns/exploding.4'`; then echo shar: \"'xpatterns/exploding.4'\" unpacked with wrong size! fi # end of 'xpatterns/exploding.4' fi if test -f 'xpatterns/exploding.5' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/exploding.5'\" else echo shar: Extracting \"'xpatterns/exploding.5'\" \(12 characters\) sed "s/^X//" >'xpatterns/exploding.5' <<'END_OF_FILE' Xxx Xx xx X xx END_OF_FILE if test 12 -ne `wc -c <'xpatterns/exploding.5'`; then echo shar: \"'xpatterns/exploding.5'\" unpacked with wrong size! fi # end of 'xpatterns/exploding.5' fi if test -f 'xpatterns/glider_l-d' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/glider_l-d'\" else echo shar: Extracting \"'xpatterns/glider_l-d'\" \(10 characters\) sed "s/^X//" >'xpatterns/glider_l-d' <<'END_OF_FILE' X x Xx Xxxx END_OF_FILE if test 10 -ne `wc -c <'xpatterns/glider_l-d'`; then echo shar: \"'xpatterns/glider_l-d'\" unpacked with wrong size! fi # end of 'xpatterns/glider_l-d' fi if test -f 'xpatterns/glider_l-u' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/glider_l-u'\" else echo shar: Extracting \"'xpatterns/glider_l-u'\" \(9 characters\) sed "s/^X//" >'xpatterns/glider_l-u' <<'END_OF_FILE' Xxxx Xx X x END_OF_FILE if test 9 -ne `wc -c <'xpatterns/glider_l-u'`; then echo shar: \"'xpatterns/glider_l-u'\" unpacked with wrong size! fi # end of 'xpatterns/glider_l-u' fi if test -f 'xpatterns/glider_r-d' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/glider_r-d'\" else echo shar: Extracting \"'xpatterns/glider_r-d'\" \(11 characters\) sed "s/^X//" >'xpatterns/glider_r-d' <<'END_OF_FILE' X x X x Xxxx END_OF_FILE if test 11 -ne `wc -c <'xpatterns/glider_r-d'`; then echo shar: \"'xpatterns/glider_r-d'\" unpacked with wrong size! fi # end of 'xpatterns/glider_r-d' fi if test -f 'xpatterns/glider_r-u' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/glider_r-u'\" else echo shar: Extracting \"'xpatterns/glider_r-u'\" \(11 characters\) sed "s/^X//" >'xpatterns/glider_r-u' <<'END_OF_FILE' Xxxx X x X x END_OF_FILE if test 11 -ne `wc -c <'xpatterns/glider_r-u'`; then echo shar: \"'xpatterns/glider_r-u'\" unpacked with wrong size! fi # end of 'xpatterns/glider_r-u' fi if test -f 'xpatterns/long_life_d' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/long_life_d'\" else echo shar: Extracting \"'xpatterns/long_life_d'\" \(12 characters\) sed "s/^X//" >'xpatterns/long_life_d' <<'END_OF_FILE' Xxxx Xx x Xx x END_OF_FILE if test 12 -ne `wc -c <'xpatterns/long_life_d'`; then echo shar: \"'xpatterns/long_life_d'\" unpacked with wrong size! fi # end of 'xpatterns/long_life_d' fi if test -f 'xpatterns/long_life_l' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/long_life_l'\" else echo shar: Extracting \"'xpatterns/long_life_l'\" \(12 characters\) sed "s/^X//" >'xpatterns/long_life_l' <<'END_OF_FILE' Xxxx X x Xxxx END_OF_FILE if test 12 -ne `wc -c <'xpatterns/long_life_l'`; then echo shar: \"'xpatterns/long_life_l'\" unpacked with wrong size! fi # end of 'xpatterns/long_life_l' fi if test -f 'xpatterns/long_life_r' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/long_life_r'\" else echo shar: Extracting \"'xpatterns/long_life_r'\" \(10 characters\) sed "s/^X//" >'xpatterns/long_life_r' <<'END_OF_FILE' Xxxx Xx Xxxx END_OF_FILE if test 10 -ne `wc -c <'xpatterns/long_life_r'`; then echo shar: \"'xpatterns/long_life_r'\" unpacked with wrong size! fi # end of 'xpatterns/long_life_r' fi if test -f 'xpatterns/long_life_u' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'xpatterns/long_life_u'\" else echo shar: Extracting \"'xpatterns/long_life_u'\" \(12 characters\) sed "s/^X//" >'xpatterns/long_life_u' <<'END_OF_FILE' Xx x Xx x Xxxx END_OF_FILE if test 12 -ne `wc -c <'xpatterns/long_life_u'`; then echo shar: \"'xpatterns/long_life_u'\" unpacked with wrong size! fi # end of 'xpatterns/long_life_u' fi echo shar: End of archive 2 \(of 2\). cp /dev/null ark2isdone MISSING="" for I in 1 2 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked both archives. rm -f ark[1-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0