                                  GWHQPRO v1.6

                                    3/03/93

  INDEX:
  Version Descriptions
  Update(s)
  Introduction
  Disclaimer
  GWHQPRO
  Registration
  Support
  Archive structure
  Installation
  Future Updates
  Final Note

  ----------------------------------------------------------------------------

  Version Descriptions:
  v1.2 is for WC 3.55
  v1.3 is for WC 3.55 -Color updates.
  v1.4 is for WC 3.6 unmodified prompt file.  Uses the orgional 697 prompts.
  You have to manually edit the last extra 10 as added in by WC!
  v1.5 is for WC 3.6, and now Tomcat (TC). Complete set of all prompts in the
  new ASCii format.  You have to load and save them using Wildcats MKWCTEXT.
  Includes several color designs and formats by request.

  -----------------------------------------------------------------------------

 -Bug and Requested Changes v1.6-

 *Added "Smart Bats" by request of many which allow you to rotate your prompt
  files as you do with many display files.

 *Updates Read.Me file with installation examples so No one should have a
  problem loading and saving any of these prompt files.  Added file Byte
  information so you can check the file(s) integrity.

 *Version 1.2 and 1.3 of GWHQPRO are NOT compatible with this version.
  As noted v1.4 will work correctly with any non updated prompt file.
  As noted Wildcat updated their prompt file for v3.6.

 *Corrected Prompt 705 so it would display correctly and not lockup Wildcat.

 *Corrected colons ':' so they displayed correctly and were not pushed against
  the letters.

 *Corrected a few brackets '[' and commas ',' so they were seen correctly
  depending on whether caller had access to a particular item in a conference.

 *Shortened command prompt so as to not insult the callers intelligence.

 *Redesigned Bulletin prompts so they displayed correctly depending on the
  number of updated bulletins.

 *Corrected [non-stop] prompt so it would disply correctly.

 *Removed reference to .ARJ file extension.

 *Various other small changes to help prompts display quicker and even.
  Thank you to the dozens of SysOps who have called to complete our [Q]
  Questionaire and give us their ideas.

 *Added ASCii setup to allow SysOps to select their own color prompt(s)
  in Wildcat and or Tomcat
  ----------------------------------------------------------------------------

- Introduction -
  Since it's introduction several months ago SysOp's from all across the
  globe have called to download this file.  GWHQPRO is what we fell should
  be Wildcat BBS Softwares Professional display Wctext.dat and now Tctext.dat
  files.
  These files have been tested and work well with Wildcat v3.60S and 3.60M
  and compatibility with other versions of said software is not guaranteed.
  We have now included several examples on how to install these prompt(s).

  ----------------------------------------------------------------------------

- Disclaimer -
  You use these files at your own risk.  The creator Lon Vennard and Gamewatch
  Software HQ BBS (GWHQ) will not be held accountable for any inaccuracies,
  errors or misprints in this software or it's documentation.  In another
  words, if the files in this archive destroys your computer and or your wife
  leaves you it won't be considered our fault.

  ----------------------------------------------------------------------------

- GWHQPRO -
  What is GWHQPRO and is it for you?  Not everyone will desire a custom set
  of prompt files.  That is just what these files are.  In this Archive you
  will find Wildcats and NOW Tomcat's Wctext and Tctext prompts file.
  We have included 10 pairs of color schemes for you to choose from.  We hope
  we have touched everyones tastes.  You are no longer held to use our generic
  colors.  A Graph below will have the layout of each ASCii file.
  If any of these are commonly used in your display files then we encourage
  you to try these prompts.  Best of all if you don't like them you can simply
  erase said file then and go back to what you were using.

  ----------------------------------------------------------------------------

 -Registration -
  Their is no charge for using these prompts.  We do so in the expectation
  that you will NOT remove the file version number held within the file.
  IMPORTANT: If you deceide to use these prompts we ask that you stop by our
  BBS and answer questionnaire 1 so we can keep track of those systems that
  use this file. It will take you all of 4 minutes to log on and complete the
  questionnaire.

  ----------------------------------------------------------------------------

 -Support -
  Yes it is available.  If you apprecaite these prompt file(s) but would rather
  have a different color, we can help.  We have created macro's that allow
  us to quickly change any current color setup.
  We can quickly and easily do this.  Like you, I dont want to sit for hours
  manually editing, viewing, 706 prompts.
  If you have any concerns or questions please let us know.  You can leave a
  message on our support BBS or MSI.  If you CANNOT get these prompts to work
  for you I WANT TO KNOW ABOUT IT!  I have tested all these prompt files under
  Wildcat and I dont like to get any messages that either they dont work or I
  cannot load them right.  I have dialed up dozens and systems and helped SysOps
  all over the country at my expense and quickly got their prompt file(s)
  working because of minor mistakes during installation.  Now if you want help
  it's time to call me.

  I'm sorry for this but I do not ask for any money for the hours of work I
  placed into these files and for the dozens of custom prompt files I have
  created and uploaded to various systems.


  -----------------------------------------------------------------------------


  Files in this archive are:

  README.TXT   - This text file.
  FILE_ID.DIZ  - Extended File Description
  WC1.ASC  TC1.ASC  -Bk./Wht./Lt.Blue   IMPORTANT: File Byte sizes:
  WC2.ASC  TC2.ASC  -Bk./Wht./Dk.Blue   Wildcat
  WC3.ASC  TC3.ASC  -Bk./Wht./Lt.Green  ASCii Files: 29,258
  WC4.ASC  TC4.ASC  -Bk./Wht./Yellow    Compiled .Dat Files: 91,074
  WC5.ASC  TC5.ASC  -Bk./Wht./Red
  WC6.ASC  TC6.ASC  -Bk./Wht./Green     Tomcat
  WC7.ASC  TC7.ASC  -Bk./Wht./Lt.Red    ASCii Files: 9,676
  WC8.ASC  TC8.ASC  -Bk./Wht./Brown     Compiled .Dat Files: 28,380
  WC9.ASC  TC9.ASC  -Bk./Wht./Magneta
  WC10.ASC  TC10.ASC  -Bk./Wht./Cyan

  WCTEXT1.BAT  TCTEXT1.BAT  -I included one batch file for each day
  WCTEXT2.BAT  TCTEXT2.BAT  -of the week.
  WCTEXT3.BAT  TCTEXT3.BAT
  WCTEXT4.BAT  TCTEXT4.BAT
  WCTEXT5.BAT  TCTEXT5.BAT
  WCTEXT6.BAT  TCTEXT6.BAT
  WCTEXT7.BAT  TCTEXT7.BAT


  If any of the above files are misssing or have the wrong byte size we
  strongly suggest you erase this archive, contact the SysOp from where
  you downloaded this file and inform him/her.
  Then call the BBS listed below and download the latest version.


  -----------------------------------------------------------------------------

 -Installation-
  NEW Installation information:  We think installation is very simple
  however we also think that driving a car is easy yet their are many SysOps
  out their without Driver's Licenses.

  First: Create a directory to house this Archive.  MD\GWHQPRO is our choice.
  If you do not know how to create a directory or basic DOS commands refer to
  you MS-DOS or operating system manual.  I know it sounds like I'm treating
  you like a novice computer user but I could tell you some stories.

  Next copy this Archive into the directory you just created.  Now if PKUNZIP
  is in your DOS Path and it should be if you run a BBS type PKUNZIP GWHQPR16
  and the archive should open up and the files will be emptied into this file
  directory.  If you get a 'Bad Command or Filename' from DOS then most likely
  you either mistyped it or PKUNZIP is not in your system Path.  If it is not
  then simply copy it from were ever its located to our directory and refer
  later to your DOS Manual on how to create a Dos Path.

  Now look at the ASCii description below and deceide which color combination
  you want to use for either Wildcat or Tomcat or Both.
  MKWCTEXT.EXE should be located in Wildcats Home Directory which should be in
  your system Path.  Type MKWCTEXT and it should load.  Refer to Wildcats Manual
  on how to use this program for other unrelated topics.  Load the ASCii file
  you want to use as your prompt file.  Note that the MKWCTEXW will say 'invalid
  prompt file'.  This is because it does not match your orgional Wctext.dat file.
  Now add any clever remarks into the prompt file like references to any
  particular utility you may use with Wildcat.

  Now save the ASCii file as WC1.Dat file or whichever number you chose in
  ASCii format.  Example, if you selected WC2.ASC then save it as WC2.DAT.
  Now exit MKWCTEXT and look to see if the .dat file is actually their.
  The orgional Ascii files are 29,258 bytes long and in .Dat format should
  be 91,074 byes long.  1 Byte off can make a difference!
  Although I have never experienced this.
  If the compiled .Dat size is correct them you ready to copy it over to
  Wildcats Home Directory.
  Remove your orgional Wctext.dat from Wildcats Home Directory and copy your
  New WC#.Dat file into their by using this command.
  Copy WC#.Dat C:\WC30\WCTEXT.DAT and press Enter.  The file will be copied
  over to Wildcats home as the New WCTEXT.DAT.  You now ready to roll.  Start
  up Wildcat and make sure your the first one on to look around.  Try all the
  prompts you can think of.  Searches, Files, Doors, etc.
  You perform the same function with the Tomcat.ASCii files.

  We us these same prompt files (all of them) every daily without any problems
  and you shouldnt have any either!

  New to v1.6 is our own "Smart Batch" files which allow you to swap your
  WCTEXT.DAT files in and out of Wildcat as often as you like.  You may need
  to edit these Batch files incase any of the Drive or Directory commands
  are different on your system.  Example many of you use Drive D: instead of C:
  and so on.  You will need to compile all the Wc#.Asc or TC#.Asc files you
  wish to use ONE AT A TIME.
  Where as if your working from the directory GWHQPRO you can only load, edit
  and save 1 Ascii file at a time and you MUST bring MKWCTEXT back down and
  start again for each ASCii file.
  MKWCTEXT cannot handle 2 errors at once were as when edited prompt files
  are loaded many times you'll get an 'invalid prompt file' but be allowed
  to continued for this prompt file in memory only.
  It will not allow you to Load, edit, save and load another custom Ascii
  file.  Simply do 1 at a time and Escape.
  Refer to Wildcats Manual if you do not understand how to create events to
  run batch files.  All the batch files you want to use should be located
  in Wildcats Home Directory.

  -----------------------------------------------------------------------------

 -Future Updates-
  We have tested these files for weeks over and over without any problems and
  unless someone wants something different we cannot forsee any updates in
  the near future.  Next update will be for Wildcat 4.0, we will have their
  WCTEXT and TOMCAT .dat files early enough to release updated versions of
  GWHQPRO!
  We are considering and have had a few suggestions for something we would
  call "Smart Prompts" which are similar to viewing the prompts with the
  Menu level set to Regular or Expert.  Your prompts would appear in this
  abbreviated fashion as well.
  If we get more requests for these we shall release them.

  -----------------------------------------------------------------------------


 -Final Note-
  If you truly want to see these prompts in action even before you use them
  then give the BBS below a call.  You will see some things not even yet
  dreamed up by the Wildcat HQ SysOps themselves.  Oh and you guys are
  invited to call as well.  You may get an idea or two.
  We apologize you the quick version updates But we have be flooded with
  ideas and requests and simply a rewrite on this read.me file was in order
  to answer all the same questions left to us on MSI and here at GWHQ.

 *Remember if you cannot get these prompts to work for you I WANT TO KNOW
  about it because their really know reson they wont work.

  For support and information or to download the latest version of this
  file you may call this BBS

                          Gamewatch Softare HQ BBS (GWHQ)
                          Data(305) 764-3108 24Hrs
                         Voice(305) 764-5153 up till 11pm est.
                          Lon Vennard, (GWHQ SysOp)

 [EOF]
