                              DELRINA

        895 Don Mills Road                6830 Via Del Oro
         500-2 Park Centre                    Suite 240
         Toronto, Ontario               San Jose, California
          Canada M3C 1W3                  U.S.A. 95119-1353

                       Product Support Numbers
           BBS:(416)441-2752      WinFax PRO 3.0 Only:(416)441-0921
      Fax Back:(416)443-1614       All Other Products:(416)441-1026
                          Fax:(416)441-0774

======================================================================
                   T E C H N I C A L    N O T E S
                      Product: WinFax PRO 3.0
                         Document No.: 2086
                   Document Date: September 2, 1993
======================================================================
Subject: "Event Errors" When Sending with Class 2 Exar Fax/Modems

Situation:
==========
Periodically, when sending while using a fax/modem with a Class 2 Exar
chipset, faxes that appear to transmit fully are logged in WinFax with 
an "Event Error" status. This problem occurs most often when faxing from 
Windows applications that consume a larger portion of system resources.

Solution:
=========
You must use a release of WinFax PRO 3.0 dated April 21, 1993 or later, 
and edit your WINFAX.INI file to specify a higher system priority for 
WinFax.

To verify the release date of your software, pull down the Help menu in 
WinFax, and select About. Update to the April 21, 1993 release of WinFax 
PRO 3.0 if you have an earlier version of the software. For details on 
updating, see the following technical notes:

        2074 -- WinFax PRO 3.0 Maintenance Release: April 21, 1993
        9002 -- Downloading and Running Patches for Delrina Products

To specify a higher system priority for WinFax:

1.  Open the WINFAX.INI file in Windows Notepad, or any other basic text 
    editor.

    The WINFAX.INI file is located in your WinFax directory (for example, 
    C:\WINFAX).

2.  Add the following entry to the [General] section of the WINFAX.INI file:

        Priority=High

3.  Save the changes to the WINFAX.INI file and exit the text editor.

    The change takes effect when you next start WinFax.

Note:  This high priority setting allows WinFax to take complete control of 
       Windows system resources during transmission, which results in more 
       successfully sent faxes. However, while sending or receiving a fax, 
       the Cancel button in WinFax is disabled and you cannot access other 
       Windows applications.
 
       To disable the high priority setting in the WINFAX.INI file, place a 
       semicolon at the start of the line, as follows:

         ;Priority=High
