                              DELRINA

        895 Don Mills Road                6830 Via Del Oro
         500-2 Park Centre                    Suite 240
         Toronto, Ontario               San Jose, California
          Canada M3C 1W3                  U.S.A. 95119-1353

                       Product Support Numbers
           BBS:(416)441-2752      WinFax PRO 3.0 Only:(416)441-0921
      Fax Back:(416)443-1614       All Other Products:(416)441-1026
                          Fax:(416)441-0774

======================================================================
                   T E C H N I C A L    N O T E S
   Product: WinFax PRO 3.0, WinFax PRO 2.0, WinFax LITE, WinFax 2.0
                         Document No.: 2066
                    Document Date: June 3, 1993
======================================================================
Subject: Specifying Intel SatisFAXtion 100/300/400e As Class 1 
         Fax/Modems

Situation:
==========
Any of the following send/receive problems occur when using WinFax PRO 3.0 
with your Intel SatisFAXtion 100, 300 or 400e (external) fax/modem:

  - When you attempt to send a fax, it remains in the event list and is 
    not transmitted.
  - WinFax seems to transmit a fax successfully, but the event is recorded 
    in the send log with an error status.
  - Received faxes do not appear in the event list or receive log.

Solution:
=========
When Intel CAS-emulation software is installed with these models of Intel 
SatisFAXtion fax/modems, communication problems may occur. You must disable
the Intel CAS-emulation drivers, then update your WinFax PRO installation 
by changing the fax/modem specification to Class 1.

1.  Open your AUTOEXEC.BAT file in Windows Notepad, or another basic text 
    editor.

2.  Type "REM" at the beginnning of the CASMODEM and FAXPOP lines to 
    disable these expressions, for example:

          REM  C:\FAX\CASMODEM.EXE
          REM C:\FAX\FAXPOP.EXE

3.  Save the changes to your AUTOEXEC.BAT file, and exit your text editor.

4.  Exit Windows, and reboot your computer so the modifications can take 
    effect.

5.  Follow the procedure for changing your fax/modem specification. See 
    Changing Your Modem, under Adding Options After Installation, in 
    Chapter 2 of the WinFax PRO User's Guide.

    Remember to select the generic Class 1 settings for the fax/modem. 
    Do not select CAS as the fax/modem type.

Note:   If you continue to experience send/receive problems after 
        modifying your AUTOEXEC.BAT and changing your fax/modem 
        specification to Class 1, contact Delrina Product Support for 
        assistance.

