IKON ANNOUNCES PERFORMANCE ENHANCEMENTS TO PRODUCTS

Seattle, Washington -- April 29, 1993 -- IKON Corporation of Seattle, WA,
announced today significant performance enhancements for a number of its
board-level interface products. Effective immediately, all products
currently employing FIFO buffers, which have used a 512 byte FIFO, will be
shipped with 4K byte parts at no additional charge. The products affected
by this upgrade (which neither alters the form, fit, or function of the
hardware nor requires any software driver changes) include the following:

* Model 10099 VME-bus "Ultimate" DR11-W Emulator

Input and output FIFO buffer depth is now increased from 2K bytes to 16K
bytes, in each direction.

* Model 10111 ISA/EISA-bus Hardcopy Interface

The FIFO buffer depth for this Versatec & Centronics interface is up from
512 bytes to 4K bytes.

* Model 10103 SBus DR11-W Emulator

Both input and output FIFO buffers are increased from 512 bytes to 4K
bytes.

* Models 10104/10105/10106 SBus Hardcopy Interface

These three boards (Versatec Differential, Versatec TTL, and Centronics,
respectively) will now have 4K of FIFO buffer, instead of 512 bytes.

These performance enhanced products are being shipped from stock now and
come with a Hardware/Software Manual, a full one-year warranty, and
coverage by IKON's unlimited, no-cost emergency field loan program.
Software drivers, including source code, for both SOLARIS 1.x and 2.x are
delivered with the SBus products; and an H-P UNIX driver, again with
source code, is provided with the 10111. Even deeper FIFO depths are
available as options; call for more information.

IKON Corp, 2617 Western Ave, Seattle, WA 98121
Tele:  (206) 728-6465 FAX:   (206) 728-1633

==========================================================
From the America Online -- New Product Information Service
==========================================================
This information was processed from data provided by the
above mentioned company. For additional details, contact 
the company at the address or telephone number indicated.
==========================================================
All submissions for this service should be addressed to:
BAKER ENTERPRISES, 20 Ferro Dr, Sewell, NJ 08080 U.S.A.
Email:  RBakerPC  (AOL),   rbakerpc@aol.com  (Internet)
==========================================================
