VISIONETICS INTRODUCES VIGA GENLOCK, VGA-TO-VIDEO OVERLAY CARD WITH
BUILT-IN VGA CAPABILITIES FOR THE PC

June 1993 -- Visionetics International Corporation (Visionetics) introduces
VIGA Genlock, VGA-to-Video overlay board with built-in Super VGA
capabilities for the IBM PC/AT, 386 and 486 systems. This videographics
board allows users to display graphics up to 1024x768 resolution in
interlaced and non-interlaced modes.

VIGA Genlock is a single-slot, single-board unit designed with a VGA card
and VGA-to-Video overlay card combined into one. With built-in genlock,
the board accepts and outputs signals from VCRs and other video devices.
It is a one board solution to users who wish to create VGA graphics, run
animation, mix both together and record the production to video.

VIGA Genlock is 100% BIOS and register compatible in all standard VGA
modes. It provides Super VGA graphics resolutions up to 1024x768 by 256
colors or 640x480 by 32,768 colors. There is no distortion to the VGA
output signal when the board is connected to a video output source. In
addition, the circuit is designed to support overscan and underscan,
therefore, users can output full 80 column text to NTSC. There are drivers
for popular software such as Microsoft Windows, GEM, Ventura, AutoCAD,
Lotus and WordPerfect. It also has a driver for the VESA standard.

VIGA Genlock uses Tseng Lab's ET4000AX chip set, and has 1 MByte DRAM on
board memory. It is immediately available from Visionetics. VIGA Genlock
is listed at $495.00 and comes with a full one year warranty.

Visionetics International Corporation was formed in 1983 and is the first
manufacturer of microcomputer-based imaging products based in a high-tech
oriented Hsinchu Science Park in Taiwan. It sets out to design products
that serve as a link between the video world and the digital computer
world.

For additional information, contact Visionetics at 21311 Hawthorne Blvd.,
Suite 300, Torrance, CA 90503. Telephone: (310) 316-740 or facsimile:
(310) 316-7457.

==========================================================
From the America Online -- New Product Information Service
==========================================================
This information was processed from data provided by the
above mentioned company. For additional details, contact 
the company at the address or telephone number indicated.
==========================================================
All submissions for this service should be addressed to:
BAKER ENTERPRISES, 20 Ferro Dr, Sewell, NJ 08080 U.S.A.
Email:  RBakerPC  (AOL),   rbakerpc@aol.com  (Internet)
==========================================================
