Quick Start
============================================================

Three Wizards have been created for ease of installation 
and configuration.

1.  When The Lock is first installed, it will 
automatically run the Security Wizard.

Each option in the Security wizard is presented with a 
detail of what the function does.  Follow the prompts 
carefully, reading each item completely.  At the completion 
of this portion, the basic system security issues will have 
been covered.  When the Finish button is presented, one of 
three things may happen.

a)  The system will close the Security Wizard, and 
The Lock will start.

b)  The system will log you off then back on if you 
selected to disable CD Auto insert notification.

c)  The system will completely restart if you selected 
to view the system BIOS settings.

When the system restarts, it will usually display a 
message such as "Press DEL to enter CMOS" or "Press F2 
for SETUP".  Once in CMOS, (BIOS), you will want to 
disable booting from the A: drive, and set a password up 
for access to the system setup.  MAKE SURE YOU CONSULT 
YOUR SYSTEM USERS MANUAL BEFORE MAKING ANY CHANGES TO YOU 
CMOS.  THE CMOS SETTINGS CONTROL ALL THE SYSTEM FUNCTIONS 
AND AN INCORRECT SETTING MAY CAUSE THE SYSTEM TO FAIL TO BOOT.

Note:  if you have elected to change system settings, the 
system will cycle to The Lock for DOS during boot up.  At 
this point, you do not have any passwords configured.  Simply 
press the enter key to continue.

2.  Once you have run the Security Wizard and the system 
has reverted back to The Lock, The Lock will prompt you to 
change passwords.  


The first password to be set is the standard USER password.  
There will be a dialog box containing the user name obtained 
from the system.  Select a password for this user name and 
press Done to continue.   This password will log the user 
into the system at a general user level, but they will not 
have administrator access.

The second password is the administrators password.  Since 
this is the initial install, the default password of 
PassWordCrash will be automatically entered into the Old 
password box.  Select a new Admin password and enter it into 
the New password dialog entry.  Verify the password and press 
the Set Password button to continue.  DO NOT FORGET THIS
PASSWORD, THERE IS NO BACK-DOOR BUILT INTO THE LOCK.

3.   After password configuration, The Lock will 
automatically restart.  It is currently configured for one 
user password and one Admin password.  When The Lock 
starts up, log into the system using the Admin password.  
Next, right click on the Pad Lock icon in the System Tray 
(next to the clock, opposite the Windows 95 Start Button).  
If there is no Pad Lock icon,  The Lock is not running.  
You may start The Lock by pressing the Start Button, selecting 
Programs from the menu, then CrashCourse Software.  The Lock 
will be an item on that menu.  

Right click on the Pad Lock icon and The Locks user menu 
will appear.  Select Options from the menu list, then select 
Configuration.  This will bring up the Configuration Utility.  
This utility will have a Wizard button at the lower left 
hand corner.  If it does not have the wizard button, press 
the Admin button and log into The Lock using your Admin 
password.  Follow the prompts in the Configuration Wizard 
through to its completion.

If you selected to edit User Group Profiles, The Configuration 
Wizard will automatically start the User Profile Utility.  
Follow this Wizard as you have for the previous two.

These three wizards can be used to configure most any 
setting within The Lock.

For any questions or comments, Email to: ccs@theknow.com


(c)1996-1998
CrashCourse Software