=================================================================
Crono 1.0 Copyright 1995 Dennis Kung. All rights reserved.
-----------------------------------------------------------------
DISCLAIMER - AGREEMENT

USERS OF CRONO MUST ACCEPT THIS DISCLAIMER OF WARRANTY:
"CRONO IS SUPPLIED AS IS.  THE AUTHOR DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION,
THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PURPOSE.
THE AUTHOR ASSUMES NO LIABILITY FOR DAMAGES, DIRECT OR
CONSEQUENTIAL, WHICH MAY RESULT FROM THE USE OF CRONO."
-----------------------------------------------------------------
CRONO 1.0 for Windows

CRONO is a convenient utility to set date-time stamp(s) of your
file(s) to any specified value. It is especially useful when
programmers or software publishers need to change the time stamps
of their program files so that the time stamps can look neat and
uniform and carry version information. You can use it FREE in
UNLIMITED time!

INSTALLATION:

(1) Unzip the files to a directory where you want them to stay.
(2) In MS Windows, run the INSTALL program in that directory.
(3) In the Crono Mini Install dialog box, click on OK (or click
    on Cancel to stop installation).

USAGE:

To set the time stamp(s) of file(s):

(0) Double-Click on the Crono Icon to start the program.
(1) Choose a drive, file type, and directory.
(2) Choose file(s) to set in the file panel.  Multiple selection
    are possible by pressing Ctrl or Alt key while choosing your
    files.
(3) Enter the date-time in the bottom-left edit box.  Date time
    format is the same as the short form in your Windows setting.
    E.g. if your setting is "YY/MM/DD  HH:MM:SS", enter this
    phrase (without the quotes) "95/10/3  1:01" for Year 1995
    October the third, one minutes past one. (To know what setting
    you have, run Control Panel, choose International.)
(4) Press the Set button and it is done.
(5) To quit, press Close button.

REMARKS:

If you have any question or comment regarding this little utility, please
feel free e-mail me (Dennis Kung) at 102370,2603 CompuServe. Thanks!

