INSTALLATION NOTES FOR PMVIEW 1.00
==================================

Installation from harddisk
--------------------------
Create a temporary directory and copy (or unzip) all the 
files to that directory. Then run INSTALL.EXE

Installation from diskette
--------------------------
Format a new diskette and give it the volume label PMVIEW1
Then copy (or unzip) all the files to a diskette. Finally
run INSTALL.EXE

NB! It is required that you label the disk PMVIEW1. If you don't 
do this, the installer will not accept the disk and keep asking 
you for "PMView - Diskette 1".

Installation to a network
-------------------------
Create a temporary directory and copy (or unzip) all the 
files to that directory. Then run INSTALL.EXE
Note that the Installer will not let the SOM DLL path point 
to a network drive. You need to specify a local drive. After
installing, please read README.TXT for more advice on
network installation issues.

Installation error EPFIE602
---------------------------
The user may receive the message "EPFIE602 An error occurred while 
attempting to create a directory. Ensure that you have write access 
to a drive with adequate disk space."

This error may occur if INSTALL.EXE cannot distinguish hard drives on 
the workstation. In this case you need to set the EPFINSTDIR environment
variable before running INSTALL.EXE.

For instance, if OS/2 is installed on the D: drive you should set
EPFINSTDIR as follows:

SET EPFINSTDIR=D:\OS2\SYSTEM
  
NB! If you don't have enough disk space on this drive you may use another
drive and/or directory


LAST RESORT IN CASE THE INSTALLER WON'T START
=============================================

Under special circumstances you may run into the problem that the installer
(INSTALL.EXE) refuses to start. In this case you can use the REXX script below
to install PMView 'manually'. PLease edit the two installation directories 
before running the script.

--------------------------------- Cut here -----------------------------------
/* REXX program for 'last resort' installation of PMView 1.00 */

Call RxFuncAdd 'SysLoadFuncs', 'REXXUTIL', 'SysLoadFuncs'
Call SysLoadFuncs

/* Make sure that these two directories already exist. They will not
   be created by this REXX script! */

PMViewDIR = 'C:\PMVIEW'
SOMObjDIR = 'C:\OS2\DLL' /* This must NOT be a network/removable drive! */

/* Create sub-directories */
'mkdir '||PMViewDIR||'\filters'
'mkdir '||PMViewDIR||'\dmdaemon'

/* Unpack files */
'unpack pmview.@ '||PMViewDIR||' /N:pmview.exe'
'unpack pmview.@ '||PMViewDIR||' /N:pmview.hlp'
'unpack pmview.@ '||PMViewDIR||' /N:pmview.ini'
'unpack pmview.@ '||PMViewDIR||' /N:register.exe'
'unpack pmview.@ '||PMViewDIR||' /N:register.dat'
'unpack pmview.@ '||PMViewDIR||' /N:readme.txt'
'unpack pmview.@ '||PMViewDIR||' /N:order.txt'
'unpack pmview.@ '||PMViewDIR||' /N:ordform.txt'
'unpack pmview.@ '||PMViewDIR||'\dmdaemon /N:instdd.cmd'
'unpack pmview.@ '||PMViewDIR||'\dmdaemon /N:uninstdd.cmd'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour3.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour4.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour5.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour6.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour7.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:contour_.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:diagonal.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi3.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi4.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi5.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi6.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi7.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:embossin.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien3.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien4.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien5.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien6.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien7.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:gradient.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa3.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pas.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:horizon1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:horizont.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:laplaci1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:laplaci2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:laplacia.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas3.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas4.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pass.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:prewitt1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:prewitt_.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:sobel_ho.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:sobel_ve.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:vertica1.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:vertica2.flt'
'unpack pmview.@ '||PMViewDIR||'\filters /N:vertical.flt'
'unpack pmview.@ '||SOMObjDIR||' /N:dmdaemon.dll'

/* Create Folder */
setup='OBJECTID=<PMVIEWFLD>;'
Call SysCreateObject 'WPFolder','PMView v1.00','<WP_DESKTOP>',setup,'R'

/* Create Program Object */
setup='CCVIEW=YES;EXENAME='||PMViewDIR||'\pmview.exe;PROGTYPE=PM;PARAMETERS=;'
setup=setup||'STARTUPDIR='||PMViewDIR||';ASSOCFILTER='
setup=setup||'*.BMP,*.CUR,*.DCX,*.FIT,*.FITS,*.GIF,*.ICO,*.IFF,*.IMG,*.JPG,'
setup=setup||'*.JPEG,*.LGO,*.MAC,*.MSP,*.PCD,*.PCX,*.PIC,*.PBM,*.PGM,*.PPM,'
setup=setup||'*.PNM,*.PNG,*.PTR,*.RAS,*.RLE,*.SGI,*.SHW,*.TIF,*.TIFF,*.TGA,'
setup=setup||'*.WPG,*.XBM,*.XPM,*.XWD'
setup=setup||';ASSOCTYPE=Bitmap,IFF,GIF,JPG,PCX,Photo CD,Targa,TIFF'
Call SysCreateObject 'WPProgram','PMView','<PMVIEWFLD>',setup,'R'

/* Create Shadow for readme.txt */
setup='SHADOWID='||PMViewDIR||'\readme.txt;OBJECTID=<PMVIEWREADME>;'
Call SysCreateObject 'WPShadow','readme.txt','<PMVIEWFLD>',setup,'R'

/* Register WPS class and create DMDaemon object */
call SysRegisterObjectClass 'DMDaemon', SOMObjDir||'\dmdaemon.dll'
setup='NOTVISIBLE=YES;OBJECTID=<DMDaemon>'
Call SysCreateObject 'DMDaemon','DMDaemon','<WP_DESKTOP>',setup,'R'

/* Deregister MMViewer WPS classes (Warp 4.0 ONLY) */
'c:\mmos2\install\instmmvw -r'

/* Done! */

return
