STAMP-MEISTER Version 4.0; Timed Edition
Copyright 1995-1996 Visionary Products and Services, Inc.
All Rights Reserved.

Suggested minimum hardware requirements:
486/33 with 4Mb RAM.

Operating System Notes:
-----------------------
This program was designed for Windows 3.1x, but during development, it has
been run a great deal under the Win 95 OS.

Under Win 95 there is one idiosyncrasy - During File I/O, when attempting
to open some system files, an error message will be displayed indicating
that the file in question is already in use.
The distinction here is that the STAMP-MEISTER error-checking is
circumvented, and the message display is less than elegant, and inconsistant
with the STAMP-MEISTER internal error display.
Other than the lack of aesthetics, this situation will not cause any
inconvenience.

Installation Notes:
-------------------
From the Windows Program Manager...  (If You have downloaded this copy, then
                                      you have already decompressed the
                                      archive.)

1. Select <File>
2. Select <Run>
3. Type   <Source Path(Location of Stamp-Meister files)>+<Setup.Exe>
4. Press  <Enter Key>

Installing from SUPPLIED DISKS:
-------------------------------
If you were installing from supplied installation disks, and using drive A:
1. For both of the two steps below you would select <File> <Run>
   from the Windows Program manager, and type the following:
   ---------------------------------------------------------
A. You would type: "A:\Setup.exe" ;Installs STAMP-MEISTER.
B. Follow the prompts that will be displayed.
C. If Stamp-Meister is supplied on disks, it should NOT be installed
   by any other means other than running the Setup.Exe file from the
   installation disks.

Installing from DOWNLOADED FILE ARCHIVE:
----------------------------------------
If you had copied the STAMP-MEISTER files to Directory -> "C:\Bogus"
1. For both of the two steps below you would select <File> <Run>
   from the Windows Program manager, and type the following:
   ---------------------------------------------------------
A. You would type: "C:\Bogus\Setup.exe" ;Installs STAMP-MEISTER.
B. Follow the prompts that will be displayed.

List of Files:
--------------
Pkunzip.Exe        29378
DosShell.Pif         545
Stamp_Pj.Exe      643760
Stamp_Hp.Hlp       29232
Stamp_IH.Ico         766
Stamp_IS.Ico         766
Stamp_IO.Ico         766
Install.Txt         3566
Order.Txt           2159
FileList.Doc        6109
Disk1.Dsk              5
Disk2.Dsk              5
BamGr16.Dl_        49320
Setup.Exe          19392
InstRun.Ex_       158285
Install.Ini          472
Idapi.Pak        1016564
IdapiCfg.Pak        1792
InstXtra.Pak      229381
LangDrv.Pak        24994
WinSys.Pak         10226

TOTAL:           2227483
                 ------- 
---End File List---Please see following:
----------------------------------------
You should find this program both easy to install, and easy to use.

Don't forget that this program is being distributed as Shareware, and
that you are expected to register this product if you like, and use it.
Your HONOR is paramount in relation to software shipped as Shareware,
and without HONOR, we have failed ourselves, and our society.

This product will operate for thirty(30) days from the date of
installation.

Thank you for trying the Timed Edition of the STAMP-MEISTER File Utility,
Version 4.0.

Regards,
Visionary Products and Services, Inc.
