******************************   DOWNLOAD.TXT  *******************************
*                             TAYLORED SOFTWARE'S                            *
*                                  VBZIPPER                                  *
*                        UNREGISTERED VERSION 1.10.05                        *
*                             *  N O V     9 4 *                             *
******************************************************************************

  Below is a list of TRANSMISSION files found for your unregistered copy of

               TAYLORED SOFTWARE'S VBZIPPER FOR WINDOWS 3.1.
               *********************************************

      The VBZIPPER installation files can be contained on one
   3 1/2" 1.44 MEG program master disk. It will contain all of the necessary
   files if it is properly created by you from the following instructions.

   Here are the files necessary that you have just received:
      1.) VBZIPUR.ZIP  - The compressed file of all compressed program files.
      2.) DLLS.ZIP     - The compressed DLL files if they are not contained
                         in your windows system directory.
      3.) UZ.EXE       - The file uncompressor program.
      4.) DOWNLOAD.TXT - This text file a copy of which is loaded to your
                         C:\VB\VBZIPPER directory during program installation.

        In order to be used for installation by Windows on your computer's
    C:\> drive and installed by windows to your computer's C:\VBZIPPER\>
    directory the VBZIPUR.ZIP transmission file will need to be uncompressed
    and stored on a 3 1/2"1.44 MEG newly formatted virus free disk. Once you
    have uncompressed it and the VBZIPPER program installation is complete 
    label the disk that you have created by these steps as VBZIPUR master
    install diskette and retain it and if you wish make a second backup of
    it. The transmission text files and the file (VBZIPUR.ZIP) may then be 
    deleted as they will not be required for program file maintence and/or
    backup.

       The main distribution file that you have downloaded is labeled as
    VBZIPUR.ZIP and it contains all of the individual compressed program
    files that are used by the program including SETUP.EXE the setup file
    that is used by windows to install your VBZIPPER program.

      In order that you may initiate the full installation of the VBZIPPER 
    program and to uncompress all of the installation files that are contained 
    In the transmission file VBZIPUR.ZIP copy it (the file) along with the 
    file UZ.EXE to your computers c:\ root directory and then place a newly
    formatted virus free 1.44 MEG 3 1'2" disk in either your a:\> or b:\>
    drive. Next access c:\ and at the prompt type the following exactly:

              UZ VBWIZUR.ZIP B:\
           OR UZ VBWIZUR.ZIP A:\  Type whichever the case may be

       If the files have been copied properly to your C:\ root directory
    and the diskette is virus and trouble free as it was when it was delivered 
    all of the necessary files will be uncompressed to your master floppy disk 
    that you are creating in the proper sequential file order.

       Please make a backup copy of this new master installation disk that 
    you have just created after the installation of the program is complete 
    for your protection using the DOS (COPY OR DISKCOPY) command. At the 
    DOS Prompt type this as follows:

              A:\> copy *.* B:\>
              OR  A:\> diskcopy *.* A:\> if you have a single disk drive.
 
      The next step is to check your windows system directory and verify
    if the following DLL files are present.

              1.) LZEXPAND.DLL
              2.) SETUPKIT.DLL
                                                                    Page 1


    If they are not then you must again repete the uncompressing step as
    detailed above except you will need to enter the following command
    from your c;\ root directory.

              UZ DLLS.ZIP B:\
           OR UZ DLLS.ZIP A:\

           Type whichever the case may be

    Then you must copy these files to your computers c;\windows\system
    directory before proceding any further. PLEASE NOTE: YOU MUST HAVE
    "ALL" OF THE VISUAL BASIC 3.0 DLL AND ACCESSORY FILES LOCATED IN
    THE C:\WINDOWS\SYSTEM DIRECTORY FOR THIS PROGRAM TO LOAD AND WORK.

         The next and last step is to access windows and enter the following
    exact command from the RUN menu box of the files menu of your program
    manager and depending on if the floppy drive you are installing the
    VBZIPPER program from your computer is a:\> or B;\> drive
    as the proper case may be.
  
                 A:\SETUP.EXE
                 B:\SETUP.EXE

         The program will then be fully installed and the setup program
    will then create the program group and all of the necessary program
    icons that are required to fully access and run all of the programs 
    contained in your UNREGISTERED copy of VBZIPPER FOR WINDOWS 3.1.

    NOTE: DONOT be concerned near the end of the installation when the
    windows 3.1 dynamic linked library system files are being written
    to that directory and the floppy drive disk looks as if it is reading
    but it looks as if no writing is being preformed to the hard drive.
    This is nornal.when installing these type of files. The total
    installation should take approximatly 6-10 min. on a 486 machine.

         Again thank you very much for trying our product and I hope
    that you will like it enough to register your copy with us. Please
    see the register help file accessed from the main program help
    menu if you so wish to register your SHAREWARE copy of the program 
    and receive the full and updated registered version of the
    VBZIPPER FOR WINDOWS 3.1 program.

      Also please review all of the program text files contained on
    the installation disk you have created or will create before you 
    attempt to load the program via windows. Please see the BROWSE.DOC 
    for full information on how to use BROWSE.COM [ the file browser ].

                              Jonathan B. Taylor
                              8504 Van Pelt Dr.
                              Dallas, Texas 75228

                              PHONE: 1-214-328-4276
                                MONDAY - FRIDAY
                               8:00 AM - 5:00 PM
                   P.S. AGAIN THANKS FOR USING OUR PRODUCT.

          VBZIPPER is a registered trademark of Taylored Software.
   All programs on this disk are Copyrighted (C) 1994 by Taylored Software.


<EOF DOWNLOAD.TXT>                                                  page 2
