                          MIDIEX version 1.8
                   Updated by Mike W. Smith, 12/5/89


  MIDIEX is a simple utility to transmit and receive raw System Exclusive
  data between your computer and your synthesizer.  MIDIEX cannot send a
  "Request SYSEX" message to your synthesizer, so all received data dumps
  must be initiated by the synthesizer.  MIDIEX requires that a Roland
  MPU-401 or equivalent interface installed in your computer to be able to
  send and receive the data.  This version of MIDIEX allows you to set the
  IRQ level the MPU uses, set the base address of the MPU card, and set the
  receive buffer size.



  To set the parameters, use:

          MIDIEX /B:nnnn /I:n /A:nnn
  where,

          /B:nnnn         is the size of the receive buffer in bytes,
          /I:n            is the IRQ level of the MPU, and
          /A:nnn          is the base address for the MPU's I/O ports,
                          (for hexidecimal numbering, precede the address
                           with a 0x)

  The defaults are /I:2 /A:0x330 /B:1024.



  To bring up help, use:

          MIDIEX ?

  which will display the above message.



  PROGRAMMER's NOTE:  MIDIEX has been completely rewritten and is now
  compatable with Turbo C ver. 2.0.  To compile the files, you will need
  either Borland's Turbo C ver. 2.0, Microsoft C ver. 5.0 or later, or
  Quick C ver 1.0 or later compilers, and Microsoft's MASM ver. 5.1 or
  Borland's TASM ver. 1.0 assemblers.  Make files have been provided for
  both Microsoft MAKE and Borland TMAKE utilities.


