		              TM
		             
		                    
		            
		           
		      Ŀ
		       TOTAL CONTACT MANAGEMENT 
		      
		      
			     Version 2.01

	   Copyright (c) 1992-1994 CreatiVision Publishing Corp.
			All rights are reserved.

		      CreatiVision Publishing Corp.
		      P.O. Box 5523
		      Arlington, TX 76005-5523

		      Inet: cvpsupport@aol.com

PROGRAM INFORMATION
-------------------
IC2 is a professional-oriented contact manager for 
Windows 3.1 running in standard or enhanced modes with at least
2MB of memory.  It can be run on a network and we recommend you
call for our multiuser manager pack for serious file sharing.

(Distributors, please read on to the suggested descriptions below)

GETTING STARTED
---------------
Welcome to IC2!  To install, follow these directions:

1.  Copy the IC2 program files to your hard drive, or you
    can install the program from your floppy drive.

2.  Make sure that the file VBRUN300.DLL is either:
      A. In the same place as the IC2 program files, -or-
      B. In your Windows SYSTEM directory, where it can be shared
	 with any other Visual Basic Application.

3.  From Windows, run the program SETUP.EXE (from Program 
    Manager select the "Run..." option from the File menu)

4.  Follow the instructions in the install program.  It will 
    allow you to either install to a new directory (i.e. from a 
    diskette) or will just configure in the current location 
    (if you have already copied the files to your hard disk). 
    It will even create a Program Manager group for you if you 
    wish.

TECHNICAL SUPPORT
-----------------
If you encounter a problem while using IC2 that 
is not covered in the Help file, you will probably 
need to contact us for user support.  Our support 
policies are as follows:

First, make sure IC2 is causing the problem:

   A. Check your Windows configuration
   B. Check your printer and print configuration
   C. Try closing any other applications that
      may also be running and try InContact again
   D. Reboot your computer and see if the problem 
      still occurs

If none of these produce results, try using the Help
file to locate information about the task you are 
trying to perform.

This program requires a basic knowledge of Windows.  
If you are not familiar with Windows, please do not 
contact us unless you're certain the problem you're 
having is related to IC2!

If all else fails, you may receive technical support
with one of the following methods:

A. Mail us a letter at:
   CreatiVision Publishing
   Technical Support
   P.O. Box 5523
   Arlington, TX 76005-5523

B. Use EMAIL:
   CompuServe - 70404,3014
	  AOL - CVPSupport
     Internet - cvpsupport@aol.com

C. Call or fax us at:
   Voice - 817/656-5970 (Hours: M-F, 9-5 CST)
     Fax - 817/656-7794

When contacting us we need the following information:
   1. The make and model of your computer
   2. The type of display
   3. The version number of Windows you are running
   4. The amount of memory your machine has
   5. A detailed account of what you did when using
      IC2 and what happened from your view.

NOTICE: We reserve the right to decline technical 
support to any unregistered user in order to better 
serve our registered customers.

LICENSE INFORMATION
-------------------
As an unregistered user you are granted a limited license period
of 15 days for a free evaluation of this product.  If you 
continue to use IC2 after that point you must register the
program.  If you do not register you must discontinue its use.

If you choose to register IC2 you will be granted a permanent 
license on the copy you are currently using.  We also offer a 
professionally printed User's Guide.  In addition, we provide 
all users with unlimited technical support over the phone.

Registration of IC2 is $49 plus $4.95 S&H ($15.00 outside the
US).  Please send a check or money order in US funds for the 
appropriate amount, made out to "CreatiVision Publishing".
We also accept orders by phone or fax if you wish to use your
VISA or MASTERCARD to register.  In all cases, we ask that you
use the order form provided in the program.  If you cannot use
the order form provided, please be sure to include all 
information requested on the order form.

*** Site Licenses and Volume Discounts are also available ***

REGISTRATION
------------
1. Register directly with CreatiVision Publishing:

   Send the following:

   * A completed, printed order form -or- a valid purchase 
     order from your company.  Specify diskette size  
     (high density only) when ordering.

   * A check or money order in U.S. funds for the registration
     amount PLUS:

     U.S. Resident  Texas Resident  Outside U.S.
     -------------- --------------- ------------
     $4.95 S/H      $2.90 S/H+TAX   $15.00 S/H

   * Any comments or suggestions

   To:  CreatiVision Publishing
	P.O. Box 5523
	Arlington, TX 76005-5523

   NOTE: To make ordering easier, you can try filling out 
	 the automated order form which you can pull up
	 by selecting "Print an Order Form" from the Help
	 Menu in IC2.

2. Register ONLINE with Compuserve:
   If you elect to register via CompuServe you will be
   charged $49 for IC2, plus a flat $15 shipping charge 
   since we cannot specify domestic or international shipping 
   rates.  International users may find this option most 
   desireable since they may find it easier to pay for 
   registration in this manner.

   The Registration ID for IC2 is:  404

3. Use a CREDIT CARD to register:
   We also accept VISA and MASTERCARD as payment for your
   registration.  We ask that you use the order form provided
   by accessing the "Print an Order Form" selection on the 
   Help menu.  This insures that all information required
   by us will be presented with your order.  You may either
   mail or fax this form to us, or have the information 
   ready when you contact us by phone.

   Our phone number is: 817/656-5970
   Our fax number is: 817/656-7794
   
We hope that you elect to register and continue to use 
IC2.  If you have any questions or comments, feel free 
to drop us a letter (at our address above), call or 
leave email to:

CompuServe: 70404,3014 
       AOL: CVPSupport
  Internet: cvpsupport@aol.com

DISTRIBUTOR INFORMATION
-----------------------
IC2 is shareware and as such, anyone is permitted to give
copies to friends or associates.  However, if you are a 
distributor of shareware products, we ask that you read the 
following text BEFORE distribution.

PROGRAM DESCRIPTIONS
--------------------
 One-Liner:     Total contact manager for Windows 

Long Blurb:     IC2 Ver 2.01 - Total Contact Manager
		for Windows.  Includes time manager,
		network compatibility, autodialer, 
		custom fields, display options, & up to
		32K of notes per contact. Design your 
		own labels, reports, and form ltrs. 
		Plus many other features!  
		Requires Windows 3.1 & VBRUN300.DLL.

DISTRIBUTION
------------
We encourage distribution of IC2 but we ask that you follow
these guidelines so that we can both serve our customers
better: 

1. You must have written confirmation of our permission to 
   distribute the program and/or collect any registration fees 
   for it (Call us & we'll send it).  BBS' and online services 
   may distribute WITHOUT permission and are exempt from #4 and
   #5.  No distributor or BBS may accept registration fees on our
   behalf unless they have made arrangements with us.

2. We ask that you please run our SETUP.EXE when creating an
   install utility for our program.  We get many calls from
   users who used your install and still can't run the program.
   Our Setup must be run to configure the program and create a
   program group.  You are welcome to run our Setup after your
   own utility.
	
   In addition, this program REQUIRES VBRUN300.DLL which is the 
   Microsoft runtime module for Visual Basic.  This file is 
   freely distributable and is readily available from a variety 
   of sources.  If you received a copy of IC2 directly from
   CVP, we have included a copy of this DLL.  If your shareware 
   library has VBRUN300.DLL, feel free to use it instead of the
   copy we sent.

3. You may NOT sell IC2 as (or included with) a COMMERCIAL
   or RETAIL product WITHOUT OUR WRITTEN CONSENT.

4. Do not include IC2 as part of a shareware package UNLESS 
   the other items in the package are augmentive utilities
   for (or relating to) our application (for large collections 
   like CD-ROMS, please get our permission).

5. If you have a rating system and your reviews deem IC2 as 
   average or below overall, please don't bother distributing
   it.  We don't have an ego problem, we just don't want to waste
   your time.

6. Sing our praises (OK, this is optional, but it would be great!) 

CREDITS
-------
IC2 is Copyright(C)1992-1994 CreatiVision Publishing,
all rights are reserved.  Written by David Balmer, Jr.

IC2 was written in Visual Basic v3.0 for the 100% IBM 
AT-compatible computer running a 286 (or higher) with at least 
2meg of memory under Windows Version 3.1 in normal or 
enhanced modes.

TRADEMARKS
----------
IC2 is TM CreatiVision Publishing; Windows and Visual Basic are
(R)(C) Microsoft Corp.; IBM is (R) International Business 
Machines Corp.

DISCLAIMER, COPYRIGHT NOTICE
----------------------------
In no event will CreatiVision Publishing be liable to you
for any damages, lost profits, lost savings, or any other
incidental or consequential damages arising out of the use
or inability to use this software, even if CreatiVision
Publishing has been advised of the possibility of such
damages, or for any claim by any other party.

This product is freely distributed as shareware with a
15-day trial license before purchase.  All copyrights
on the name, look-and-feel and operations are strictly
enforceable.  It is illegal to change any text within
the program code that would remove the copyright notice
for CreatiVision Publishing.  It is also illegal to
change ordering information text in the program or to
distort in any way the identity of the rightful 
copyright holder.

