                         QUE ACCOUNTING
                  Accounts Receivable Installation

For the system to function properly, it must be installed on a
hard drive.  The specific requirements are listed below.  Note
some adjustments may be required of DOS configuration files.

HARDWARE

QUE requires : 
  - 640K MEMORY 
  - 1,000,000 BYTES FREE on hard disk * 
  - a floppy drive used for installation 

SOFTWARE 

  - CONFIG.SYS - needs to have FILES=25 and a BUFFERS=16 
  - Must be installed on C or D drive. To install to other 
    drives the knowledgeable person can change the INSTALL bat 
    files. 

The directory structure created during installation is the value
entered at the command: 
 
     eg A:INSTALL QUEAR

       where QUEAR is the name of the directory to be created
 
In case this directory is already used for another application,
no files or programs will be overwritten and no harm should come
to that system.  However removing the other system to a separate
directory, is advised.

PROCEDURE

The system comes with 1 diskette. To install the system insert
the diskette into  drive A and type in 

        C> A:INSTALL QUEAR 
 
To install from another drive(example B), change the INSTALL.BAT
file to read B: in all places where A: is found or type in the
following commands:

        C> MD QUEAR
        C> CD QUEAR
        C> B:PKUNZIP -O B:QUEAR

The documentation may be viewed on line or printed out by typeing
the following command. Note the manual is segregated into several
sections following the Main Menu structure.

        PRINTDOC 

You are now ready to start. Please do the following: 

        C: 
        CD\ 
        C> CD QUEAR
        C> ARMUCD

Enter "AAA" for COMPANY and "test" for PASSWORD and then go to
the UT Menu and select the REINDEX option in order to create the
index files. If you don't do this step, the system will not work. 


