Converter version 2.45 - Conversion utility for the Psion 5 ----------------------------------------------------------- *Freeware* by Alex C. Skilton / Advanced Computer Services Downloaded from http://www.skilton.net You can register to receive notification of updates at http://www.skilton.net Please remove ANY previous beta versions before installation! I would appreciate any feedback or comments about Converter and ideas for new versions ... just send them by e-mail to alex@skilton.net Any contributions of any form to support the development of Converter are appreciated but there is no obligation ;-) Converter started as freeware, and will ALWAYS remain freeware !! If you would like to become a beta tester, please send an e-mail to alex@skilton.net and if required, I will send you the latest beta versions to test. Please read the help file for the latest information on Converter. Installation ------------ If the Converter.zip file was unzipped successfully, you should have this text file and the SIS installation file. If you know what a SIS file is, just double click on converter.sis in Explorer or tap on it on your Psion 5, and Converter will be installed either to the C: or D: drive (depending on your choice). If you don't know what a SIS file is, follow these instructions: If you have PsiWin 2.1, double click on the converter.sis file from Explorer to install it directly to your Psion. C If you have PsiWin 2.0 or if you have the converter.sis file on your Psion 5 with a question mark alongside it, you do not yet have the facility to install SIS files to your Psion 5 ... * Grab a copy of the INSTEXE.EXE file from http://www.skilton.net and tap on it on your Psion 5. After installation, an icon should appear alongside the converter.sis file. * Tap on this file to install Converter - select the drive you want to install to, and the installation should proceed successfully! If everything proceeded successfully, you should have the Converter icon in your Extras bar, ready to run! Expert information ------------------ After installation, all program files will exist in "System\Apps\Converter". No OPXs are needed. If you want to run Converter under the WINS emulator, just copy the Toolbar.opo file (created if you select "Create standard files" under the OPL editor) into C:\System\OPL and Converter will be able to function correctly. Disclaimer ---------- Converter is © 1999 Advanced Computer Services - this program was written by Alex C. Skilton ("the author") - All rights reserved. Converter must not be decompiled or reverse translated under any circumstances. If performed, you will be prosecuted to the maximum extent of UK law. Advanced Computer Services and the author CANNOT and DOES NOT accept any liability for loss caused by error, defect or failure of the software including any loss of any kind. No guarantee is either offered or implied by Advanced Computer Services or the author. Use of this software is entirely at your own risk.