RMRBoxx v1.07 Sharware ---------------------- FatCatz & RMR Software 98/11/29 ****************************************************************** * WARNING! * * Do not install this if you have Sokoboxx installed already. * * RMRBoxx and Sokoboxx are the same game. You can either install * * one or the other but do NOT install both together. It might * * crash your machine. You have been warned! * ****************************************************************** CONTENTS -------- 1. File contents 2. Introduction 3. Installation 4. Registration 5. What's new 1. FILE CONTENTS ---------------- The compressed file Rbx106en.zip contains 3 files; readme.txt RMRBoxx.sis RMROpx.sis 2. INTRODUCTION --------------- This is a shareware of the classic, Sokoban. Included are the original 1984 DOS Sokoban levels and the computer generated levels by Yoshio, Hitoshi and Yuzuru, over 100 levels in total! The cost of registration is only US$15, for registration information see below. Registering will let you play any level and also let you use the level editor to design new levels, and no nag screens ;-) 3. INSTALLATION --------------- 1. There are 2 methods to install RMRBoxx, depending on where you have copied the .sis file and what setup you have; - On a PC with PsiWin From the Windows Explorer double click the .sis file, this will automatically install RMRBoxx onto your machine. If that doesn't work right click the My Psion icon and click the Install New Program option. If you do not have the Install New Program option then download setup.exe from our site or from Psion's site install it and try again. - On a EPOC32 Machine Tap the .sis file to install, if this does not work then you do not have the Add/Remove utility, in this case download instexe.exe from our site, or psion's site and copy it to your machine and try again. 2. Repeat the same procedure above for RMROpx.sis, you must install this to play RMRBoxx. 3. Finally press Extras|RMRBoxx, to play. 4. To uninstall goto the Control Panel, tap the Add/Remove icon, select RMRBoxx and finally press the Remove button. 4. REGISTRATION --------------- If you wish to register the program, you can do so by post (snail-mail), or on-line using the SWREG facility on Compuserve, or on the WWW by using RegNet (credit cards). If you are using the postal service, please send a cheque (check) for 10 UK pounds or US$15 or 30DM payable to 'RMR Software' (or the equivalent in 'real money' in your actual currency - no foreign currency cheques please), to one of the following addresses, including a stamped address envelope for the reply : RMR Software c/o 6000 Natick Court Burke, VA 22015 USA RMR Software c/o 46 Mortimer Road Kempston Bedford MK42 8RE ENGLAND RMR Software c/o PSIOlogic Versand Sudentenstrasse 46 D 63571 Gelnhausen GERMANY RMR Software c/o Onsite Sherutay Michshuv 20 Ashtory Hafarchi St. Tel-Aviv, 62743 Israel (In this case make cheques payable to Onsite Sherutay Michshuv) Please note that these are the addresses of our 'agents'. If you use these addresses, Registration codes will be sent out fairly quickly, but if you send a technical query, it will have to be redirected to us, so might take a few weeks to reply. If you have access, we can be reached quickly at support@rmrsoft.com The quickest way to register, if you have access to CompuServe, is to use GO SWREG and use Registration ID - 16298. The notification normally reaches us in 24 hours and we can reply with the code quickly, again normally within 24 hrs. Ignore the question about the disc size when you register, you do not need one. (Note that using this method will require an extra $3 handling charge) If you wish to register using a credit card you can register on the WWW through RegNet, the Registration Network. RegNet can be reached by e-mail: orders@swregnet.com or on the World Wide Web: http://www.swregnet.com or in the USA by calling 1-800-WWW2REG (1 800 999-2734) or the easiest way is by following the links from my WWW Home page at: http://www.rmrsoft.com/ This program has been allocated the REGNET Number: 2755 and this should be quoted. Again, the notification tends to get to us within 24 hours and we reply within another 24 hrs. (Note that paying by this method will involve an extra US$5 handling charge) In each case, we (or our agent) will then send you a personalised registration code to enter (select the option via the Menu) to remove the 'nag' screen and allow full use of the program. Note that you will NOT need a new copy of the program, all the functionality is already there but just needs 'unlocking' by 5. WHAT's NEW ------------- v1.07 -A few cosmetic changes. v1.06 98/10/04 -Fixed scroll bar bug -Fixed a bug in the level editor, upgraded to v1.02 v1.05 98/10/01 -First RMRBoxx release. Enjoy! FatCatz & RMR Software