PSILoc+ localisation, version 2 (c) PSI NT (www.psiloc.com) INSTALLATION 1. Save the installation file (.zip) on your PC. 2. Extract its contents. If you do not have any earlier version of PSILoc+: 3. Run the .SIS file. 4. Follow the instructions appearing on the screen. If you have previously installed any version of PSILoc+ on your palmtop: 3. Reset the machine. 4. While starting your palmtop press and hold the SHIFT button for approximately 10 seconds. 5. The information "Polish localisation skipped" will appear on the screen. 6. Follow the instructions appearing on the screen. OR 1. Save the installation file (.zip) on your PC. 2. Extract its contents. 3. Copy the .SIS file on to your palmtop. If you do not have any earlier version of PSILoc+: 4. Run the .SIS file on your palmtop. 5. Follow the instructions appearing on the screen. If you have previously installed any version of PSILoc+ on your palmtop: 4. Reset the machine. 5. While starting your palmtop press and hold the SHIFT button for approximately 10 seconds. 6. The information "PSILoc+ skipped" will appear on the screen. 7. Follow the instructions appearing on the screen. ATTENTION! After the installation is complete PSILoc+ will reset your machine! DESCRIPTION PSILoc+ allows the system to integrate better with the user, supplies it with many useful additional features, and enables full or partial system localisation. PSILoc+ is an enhancement of the EPOC system. It gives the user multiple possibilities to control the system, run applications, control the computer's memory, link, batteries, alarms, and other settings. The methods of setting different options can be adjusted according to the user's preferences. REQUIREMENTS Machine: Psion Series5, 5mx, 5mx PRO, Revo, Revo Plus, Diamond Mako, Series7, netBook, Ericsson MC218. COPYRIGHT Copyright (c) 2000 PSI NT Koszalin All rights reserved.