To establish a PPP connection through 
CompuServe, you must have Warp's Internet 
Access Kit (IAK) installed on your machine.  
You must also have the PPP update installed 
which you can ftp from ftp.ibm.net as 
/pub/PPP/PPP.ZIP or you can download the file 
from the OS/2 USERS forum (GO OS2USER) in 
library 20 with the filename $PP.ZIP.



Once you have the PPP update installed, you 
need to open the Dial Other Internet 
Providers object in the Internet Utilities 
folder. Then choose the Add Entry object, or 
select Add Entry from the Configure pull-down 
menu, then configure dialer as follows:



 Login Info page of the settings notebook:



  - In the Name: field, type CIS or PPP or 
some other "name" for

    this connection.

  - In the Description: field, enter a 
description for this

    connection.

  - For the Login ID: field, enter the 
following substituting

    your User ID for 70006,101.



    Example: 70006,101/GO:PPPCONNECT



  - Enter your password in the Password: 
field.

  - In the Phone Number: field, you need to 
enter the dial up

    number that you use to connect to 
CompuServe.

  - Then enter the following information into 
the Login Sequence:

    field



  \r

  ame:

  CIS

  ID:

  [LOGINID]

  ord:

  [PASSWORD]



  - Set the Connection Type to PPP.

  - Set the Inactivity Time Out to the 
desired minutes for the

    dialer to wait before automatic hangup.



 Connect Info page of the settings notebook



  - Set the MRU (Maximum Receive Unit) to 
1500.

  - Place a check in the VJ Compression 
checkbox.

  - Enter 149.174.64.41 in the Domain 
Nameserver: field.

  - Enter compuserve.com in the Your Domain 
Name: field.



 Server Info page of the settings notebook



  - Enter news.compuserve.com in the News 
Server: field.

  - Leave the other fields blank.



 Modem Info page of the settings notebook



  - Select your modem type, com port, desired 
baud rate, data bits

    8, and parity NONE.



After adding the above information you need 
to close the settings notebook and choose 
SAVE.  Then to establish your PPP connection, 
select the NAME of the connection and choose 
DIAL.  You will then see the initialization 
of the modem, the dialing, the logging in, 
and you should see the following  messages in 
the Status Window:





  notice : ipcp_up: remote IP address 
149.174.64.25

  notice : VJ TCP header compression enabled

  info   : default route assigned through 
149.174.64.25

  [PPP]    Enter Ctrl-C or Ctrl-Break to End 
Session



When you see the above message, then the 
connection is complete. You must leave the 
dialer running while you have the PPP 
connection active. You may want to minimize 
the dialer after the connection is 
established. 
