1.  turn power on.

2.  Within 10 seconds

3.  try pressing and holding the FCN key, press 4,
    release FCN, press the volume up key twice, press CLR, release and
    immediately press and hold CLR while entering 9 2 3 8 8 5.

4.  phone will display the ESN in decimal format at this stage,
    some will step directly to programming step 0.

5.  The S (send) key is used to store each item and increment the step
    number.

6.  The END key is used to complete and exit programing mode at any time.

PROGRAMING:

STEP#    #OF DIGITS/RANGE    DESCRIPTION

0        10 DIGITS           MIN (AREA CODE AND TEL#)
1        000 TO 999          LOCK CODE (MUST BE DIFFERENT THAN STEP 11)
2        00000 - 32767       SYSTEM ID
3        0 OR 1              LOCAL USE MARK
4        0 OR 1              MIN MARK
5        333 OR 334          INITIAL PAGING CHANNEL
6        2 DIGITS            ACCESS OVERLOAD CLASS
7        0 OR 1              PREFERRED SYSTEM
8        2 DIGITS            GROUP ID (10 IN USA)
9        0 OR 1              HORN ALERT
10       0, 1 OR 2           HANDS FREE (SEE NOTE 1 BELOW)
11       3 DIGITS            ALT LOCK CODE (MUST BE DIFFERENT THAN STEP 1)

If the phone has dual NAMS it will display "0" or "1", press 1 to program
second NAM.