		      Readme for FIELDTST directory

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
WARNING:  DO NOT APPLY ALL THESE PATCHES, UNLESS YOU HAVE BEEN INSTRUCTED TO 
	  DO SO BY NOVELL TECHNICAL SUPPORT PERSONNEL.

Please Note:    These files have not been through the patch test team.

***********************************************************************
**************************** GERMAN ***********************************                
		
		STACKFIX.PAT     973    30-03-93       10:17a
		TCSFIX.PAT      1073    08-06-93        1:09p
		WNET.EXE      504832    10-29-93       11:20a  
		WNETRES.DLL    24576    10-29-93        3:30p
		NLPLIB.DLL     58480    01-05-93        1:59p

************************************************************************

INFORMATIONEN BER BESTIMMTE FEHLERKORREKTURDATEIEN     (GERMAN)

************************************************************************

STACKFIX.PAT -  NetWare Lite Server stack fix patch.
   
Target:         SERVER.EXE

Problem:        The server switches to its DOS reentrency stack during 
		initialization.  The Norton antivirus device driver 
		interrupts the server after initialization and does some 
		work.  The server timer interrupt then kicks in, 
		switches to the top of the server DOS reentrency stack 
		and corrupts the data that the server had on the stack 
		before the timer interrupt. 
   
Symptoms:       When the Norton antivirus device driver is loaded and 
		SERVER.EXE attempts to load, the server will hang.

****************************************************************************

TCSFIX.PAT -    NwtWare Lite Server TimerCriticalSection=100 patch  

File:           SERVER.EXE 
Checksums:      A1, 145, 74, 165, 64, 40 

Problem:        Some software/hardware will not function properly (according to 
		their manufacturers) under Windows if the TimerCriticalSection
		setting under the [386Enh] section of the SYSTEM.INI file is 
		set too high.  This patch forces the NetWare Lite SERVER.EXE to
		allow the TimerCriticalSection to be set as low as 100 to
		accomodate these special circumstances.

Symptoms:       Software/hardware fails to function properly under Windows and  
		the manufacturer states that the reason is that the  
		TimerCriticalSection is set too high.

***************************************************************************** 

WNET.EXE:

Note:           This is not the complete WNET utility, only two files have been
		updated.  You should use these only if you currently have WNET.

Symptom:        This new file fixes the problem where WNET doesn't release 
		the windows resources after exiting WNET.  Also fixes the problem 
		with creating Network directories with spaces in them.        

Instructions:

Copy the WNET.EXE and WNETRES.DLL file into your \NWLITE subdirectory, overwriting 
THE existing WNET.EXE file.  Copy the NLPLIB.DLL into your \Windows subdirectory,
overwriting the exisiting NLPLIB.DLL file.  Restart Windows and run the WNET 
utility.  

*****************************************************************************
